-
Beware: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. Can be attached to the tactical vest Features: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment The backpack can be custom-made by the user for radio or medical equipment. Ventilated back with plastic plate and aluminum support at back to make it sturdy but customizable Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone The shoulder pads can be stored behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap A ballistic plate or drinking bag can be transported in the rear compartment The bag is made of wear-resistant coated polyamide fabric and sturdy zippers Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened Push button in the main compartment ensures that the zipper does not open too much Four long compression straps on the side are sewn to the backpack The loose ends of the side compression straps are rolled up and fastened with Velcro The bag has two carrying handles, one on the side and one on the top Main compartment has two inner compartments with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment The outer compartments have a zipper and each has an elastic mesh pocket with zipper on the inside Modular webbing to mount bags/bags are placed on the outside of the outer pockets An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open A man pack radio can be secured with two straps close to your back for the best weight distribution and balance (straps not included) Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Access holes for radio or computer cables are placed on each side of the backpack The cable for the radio microphone is inserted through the access hole into the lower part of the backpack and then the microphone is attached to the shoulder pad Owner identification can be written on the Velcro The backpack is suitable for carry-on dimensions The backpack can be attached to the back/top of our modular equipment vest -10 and plate carriers. MOLLE tires on the sides. Capacity = 30 litres. 22L in the main compartment, 6L in the lower outer compartment and 2L in the upper outer compartment. -
Snigel GHILLIE CLOAK -14 A lightweight camouflage net that works well with your wearer and reduces your visual and to some extent your thermal signature. To be used as a jacket or as a camouflage net. If you move, you wear it like a jacket and if you go static, you can use it as a camouflage net. The garnish (leafy patches) is sewn so that they do not get stuck in the vegetation when you move with the mantle on. At the edge of the mantle, loops are sewn flat to minimize the risk of them sticking in branches. The back of the cloak is printed in a dessert/mountain colors. Packed the volume is only 2 liters. The mantle is made of a flame retardant polyester mesh that does not suck up water and therefore does not get heavier in the rain. Dimensions: 120 x 150 cm -
Not in stock - on order
A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.- Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
- Content: 50L.
- Dimensions: B = 34, H = 62, D = 22 cm.
- Weight: 1850 grams.
-
For the group medic or the technician etc. who wants to carry the required equipment on the equipment vest, around the waist, on the back, over the shoulder or attached to the back pack Large compartment with Velcro flap inside the bag Four small and zipped compartments in clear plastic inside the main compartment. Four elasticized compartments with Velcro closure on top of the main compartment One large and two small inside pouches in different colors are attached with Velcro to the bottom of the bag. Zipped closure with emergency closure buckle on the top. Two padded shoulder straps with chest strap to be used when carrying the bag as a backpack. Two long straps to attach it to the back of the equipment vest or to connect and use as a shoulder strap. Roll up ends with Velcro to keep the bands neat. Two short straps to secure it to the equipment vest or to secure it around the leg. Handle in the top to carry the bag in your hand. Outside Velcro stripes so you can attach your markings. Fits: Medical supplies or technical equipment Fits on: The equipment vest back, over your shoulder or around your waist Dimensions: H=33, W=30 & D=10 cm. Volume: 10L Weight: 1200 g -
Not in stock - on order
A traditional backpack with flap.- Zipper compartment in the valve.
- Elastic cord on top of the flap.
- Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and attachment for handset/microphone.
- The shoulder pads can be removed.
- A ballistic plate or hydration bladder can be worn in the compartment in the back compartment.
- Run-up / closure in the main compartment keeps snow and dirt out.
- 2 removable MOLLE straps on the back of the backpack, where more bags can be attached.
- Velcro for identification patch.
- Band and elastic band for microphone for the section radio.
- The backpack can be attached to the back/top of our vests and board carriers.
- Roll up the ends of all the straps to keep them tight.
- Size: 30L.
- Dimensions: B = 27, H = 46 & D = 16 cm.
- Weight: 1100 grams
-
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
Not in stock - on order
The Snigel Snigel 15-20L all pack is a lightweight backpack that can be used in many different ways. In fact, it's a simple package with a semi-covered zippered opening. It has MOLLE/PALS tires at the front. The inside is covered with Velcro, so our pockets can be attached there (pockets not included). Elastic cord compression on the sides Outside Velcro stripes so you can attach your markings. The package can be attached to our large backs, on our ballistic and non-equipment vests. It can also be worn alone. Fits inside: All types of equipment; radio, medical supplies or personal equipment. It may be:- Worn as a shoulder bag.
- Worn as a backpack.
- Wear around your waist.
- Attached to an equipment vest or a plate carrier with I-bars.
- Attached to a large backpack
- Weight: 860 grams
- Volume: 10-20L
- Dimensions: 45 x 30 x 10 cm
- Colors: Gray, Multicam
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Not in stock - on order
Duffel bag and backpack in one. The padded handles work as shoulder straps as well. A very large, zippered opening for easy access and overview of the main compartment. Two side compartments in the ends makes it easy to organize the packing, and are large enough for your helmet. One zippered smaller compartment inside the flap for equipment that you wish to tuck away. One grab handle in each end. Three windows and one large Velcropatch for patches. Loop Velcro fabric on parts of the interior where you can attach our insert pockets to get extra organized. Weight: 1000g Dimensions: H= 32 W=43 & L= 87cm Volume: 120L -
The small bag to store your short rifle or submachine gun. Padded and reinforced to protect the contents. The bag can be carried in the handles, over your shoulder and as a backpack. Two zippers opens the top completely. Inside compartments for magazines and maintenance equipment. Weight: 1,5 kg Dimensions: L= 60 cm, H= 30 cm, W= 7 cm Fitts inside: G36C, MP5, pistol, radio, magasin, batong och a weapon cleaning kit. -
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
Not in stock - on order
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
The Duffel Bag from SnigelDesign is a carrying case and backpack in one. The padded handles also serve as shoulder straps so that the duffel can also be worn on the back. The main compartment has a wide opening and a light coloured inner coating so you can look closely at the inside of the bag. The two zippered side pockets are designed so that you can store a helmet in them. If you don't use it, it can be folded up to save space. The 55L duffel bag is generally accepted as hand luggage. Material 100% polyamide 600D; No.10 YKK® zippers; Duraflex® closures and buckles. Details:- Padded shoulder straps with fast-circuiting.
- Reinforced handles at the ends.
- Large main compartment with 2-zipper, zippered inner pocket and 2 Velcro surfaces for attaching additional equipment.
- Very large opening and bright inner coating making it easy to see the inside of the bag.
- Two side pockets with 2-way zipper that are large enough for a helmet.
- No.10 YKK® zippers with zipper aids that can be easily grabbed even with gloves.
- Three clear ID slots.
- Velcro surface for ID patches.
- IRR coating to reduce ir signature (stone grey olive green).
- Flame retardant supermaterial according to the specifications of the Swedish Armed Forces (stone grey olive).
- Capacity: 55 litres.
- Dimensions: ong. 28 x 31 x 65 cm.
- Weight: about 795 grams.
-
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
