• With its streamlined thumb-activated retention, the T-Series L3D keeps your firearm ready while maintaining total safety. Thanks to a drawing movement that works according to the Master Grip principle, you can fight even under the most stressful conditions. A combination of reinforced polymer on the outside and smooth, sound-absorbing, hydrophobic lining ensures that your T-series will perform regardless of the elements and the situation. As an additional safety measure, the L3D also has a belt over the back of the firearm. Includes belt loop for jacket opening attached to holster. Quick Dual Release (QDR) belt loop and belt loop with 2 slots are sold separately.
    • Thumb-activated retention follows the Master Grip principle
    • Compatible with Streamlight TLR 1 and 2
    • Low-friction internal material for smooth and effortless pulling
    • Sound-absorbing lining for stealth drawing and holstering
    • Durable material provides protection with a sleek design for minimal bulk
    • Available in Level 2 or Level 3 configuration
    • Level 3 adds a fastening strap to the back of the slide
  • Not in stock - on order
    The UF PRO® Combat Pants Striker XT Gen.2 not only offers all the necessary elements such as reliable knee protection and functional pocket configuration, but above all full freedom of movement and the highest level of comfort. To achieve this, the Schoeller® Dynamic Stretch material, the wear-resistant CORDURA® fabric and the polyester-cotton ripstop material were combined on specific parts of the body to achieve the best overall performance. The separately available Striker XT knee protection system provides reliable protection against bumps or sharp objects and is above all very comfortable to wear. Because of the anatomical cut, you don't have to tie anything around the knee to fix it in the correct position. The cushions are pushed into the compartments on the knee. The pads have a flexible structure and therefore form the knee ergonomically. The trousers can be equipped with three different types of knee pads that can be worn together or separately. The UF PRO® Flex SAS-TEC pads protect against shocks. The UF PRO® Flex-Soft Pads offer extra padding if you need to kneel frequently - especially with heavy equipment. If you need extra protection from sharp objects, the UF PRO® Solid Pads are the right choice. The Striker XT combat pants have a total of 13 pockets (excluding the inner pockets). They provide ample storage space for all important equipment and provide access to it at any time. The anatomical cut of the pants ensures that everything stays in place, even if you move and don't dangle. The Striker XT pants are designed as a team player with respect to the rest of your equipment. You can attach a belt (or even a combat belt) to the double belt loops or boots to the boot hooks. You can wear the Striker XT pants all year round. If it's too hot, you can easily open the knee pad pockets and feel an extra air circulation within seconds. You can also wear them during missions below zero degrees Celsius. The inner zipper allows a separately available WINDSTOPPER® lining to be attached to the trousers, providing comfortable protection against wind and cold. Material Upholstery: 80% cotton, 20% polyamide; Stretch inserts: Schoeller® dynamic: 92% polyamide 8% elastane: knee and hem reinforcements: 100% polyamide (CORDURA®) Reviews Details:
    • Double belt loops.
    • Elastic waistband.
    • The ergonomic UF PRO® 3-layer knee protection system.
    • Width adjustment in the hem of the trouser legs.
    • Fly with double slider.
    • Zipper in the waistband for WINDSTOPPER® lining.
    • CORDURA® reinforcements in the trouser legs, hem and knees.
    • Shoe loop.
    • IRR coating to reduce ir signature.
    Pocket configuration:
    • 2 front pockets.
    • 2 back pockets.
    • 1 safety bag.
    • 2 horizontally and vertically accessible side pockets with large storage space and inner pockets.
    • 2 Attached equipment bag with removable safety valve and pen compartment.
    • 2 warehouse/knife/marker bag.
    • 2 large pockets on the lower leg.
    Weight: approx. 950 g (size 34/34) The belt is not included. So far, the PHANTOMLEAF® products have only been delivered to special forces units in the army and police at home and abroad. Their effect is proven there in action. Due to the various demand® phantomleaf has decided to also offer camouflage patterns for sale. The result is the WASP II camouflage pattern, which combines an exclusive look with striking camouflage quality.
  • Snigel weapon sling system 1.0

    107,95113,95
    A very comfortable, flexible, fast, accessible and safe way to carry a weapon. With a vest strap attached to the vest, the weapon can be attached to the vest. This removes the uncomfortable strain of the neck that is common with regular arms trops. The strap is adjustable at both ends. The system contains two vest straps, which can be attached to each shoulder. The weapon can then be worn hanging in the middle or on one shoulder, right or left. The weapon system offers several ways to carry a weapon. 1. As a standard rifle belt, with the shoulder cushion and the two fastening straps, mounted in the front and rear of the weapon. 2. With a vest strap on the right or left shoulder on the vest. A fastening strap mounted at the back of the weapon and then attached to the vest strap. 3. With vest strap on the right and left shoulder of the vest. Both fastening straps are mounted on the back of the weapon and then fastened in the vest straps. Now the weapon is centered on the chest. 4. Fastening straps mounted in the shoulder cushion and then both fastened in the rear part of the weapon; Now the gun is in a loop around the neck. The weapon can be folded up and the elastic wire can be pulled around the barrel or any other part of the weapon to secure it while skiing or shooting with a section weapon. Be careful when the barrel is hot, it can melt the elastic wire. The system can be fixed in two different ways: A. Silent, in the weapon with the sewn loops. B. Flexible with carbine hooks.
  • Not in stock - on order
    The 5.11 Tactical AMP12 ™ is designed for longevity, flexibility and comfort. Compact and efficient, the innovative 5.11 HEXGRID® suspension system and Gear Set ™ compatibility offer many options for assembling or fixing equipment. The removable HEXGRID® mounting platform is MOLLE-compatible and offers a vertical, horizontal and diagonal mounting capability thanks to the special honeycomb structure. The HEXGRID® panel is removable and can be replaced with 5.11 Gear Set ™-compatible equipment. The AMP12 ™ has a capacity of 25 liters, spread over a padded laptop/trink reservoir rear compartment, large main compartment and two flat front compartments. Completely firm, the No.10 YKK® zipper with 4 zippers opens to the main compartment with a back panel with Velcro for fixing pockets and hook back gear. The flat CCW-compatible compartment features holster Velcro straps and fastening loop, holster fasteners and hidden short arms. material Main material: 1050 Den polyester; Soil: 500 pines polyester; HEXGRID®: 420D / 1000D Cordura® nylon; YKK®-Reißverschlüsse; Dura-Flex® hardware. Details:
    • Ergonomically shaped and padded shoulder straps with fasteners.
    • Height adjustable and removable chest strap with fast-circuiting.
    • Thermoformed back cushion.
    • Sturdy carrying loop.
    • Back pocket for laptop /hydration-bladder and longitudinal ports.
    • Complete with No.10 YKK® 2-way zipper main compartment with Velcro back and 2 mesh pockets with zipper.
    • Compression straps on the side.
    • Flat zipper front pocket.
    • Flat CCW-compatible front pocket with Velcro closure.
    • Removable HEXGRID® mounting panel.
    • Gear Set ™ compatible.
    • Velcro patch for ID patches.
    • Capacity: 25 litres.
    • Dimensions: approximately 50.8 x 28 x 14 cm.
    • Weight: about 1490 grams.
  • The Defender-Flex Range Pant continues the series of the 5.11 Tactical bestseller Defender-Flex trousers and jeans. Designed for users who want tactical options in comfortable and casual-looking trousers. It has a slim-fit jeans style with five pockets and two extra back pockets for magazine/smartphone with reinforced belt loops to support a Gunbelt or EDC/CCW belt. The pockets are reinforced with rivets and integrated nylon 6. Material 97% cotton, 3% elastane Details:
    • 2-way Flex-Tac stretch fabric.
    • 2 hand pockets reinforced with rivets.
    • 1 watch bag in the right pocket.
    • 2 stitched back pockets.
    • 2 hidden hand pockets above the back pockets for example. AR-15 magazine, smarthone, etc.
    • 8 belt loops (55 mm).
    • Weight: approx. 532 g (size 32).
  • Not in stock - on order
    The 5.11 Tactical Response HL XR1 is an extremely powerful yet unobtrusive portable headlamp that's small and light enough to fit easily into an EDC backpack or bag. The 5.11 Tactical Response HL XR1 headlamp has a luminosity of 1000 lumens in peak spot mode with a continuous duration of two hours. In independent spotlight mode, it has a duration of six hours. Independently adjustable LED spot and COB spotlights with rotation function make it possible to adjust and control the conditions. The lamp is removable so that it can be used as a rectangular flashlight. Material Aluminium Specifications
    • CREE XPL-HD V5 LED.
    • Robust aluminium housing.
    • Independently controlled LED for spot mode and chip-on-board LEDs (COB) for spotlight mode.
    • By mounting, the lamp can be rotated 180° or the lamp can be removed.
    • Integrated pocket clip.
    • Elastic, woven headband.
    • AA and 14500 compatible.
    • IP54 water resistance.
    • Spot mode: max. 1021 lumens (running time 1 hour 35 minutes); Min. 12 lumens (running time 35 hours).
    • Floodlight mode white: 81 lumens (running 6 hours 20 minutes).
    • Floodlight mode red: 3 lumens (running 45 hours).
    • Length. about 11 cm.
    • Weight: about 126 grams.
  • Developed and built with direct input from active K-9 teams and is certified according to CE EN 388: 2016. This glove combines a Vibram® anti-friction handrest and a hard-wearing hand palm made of synthetic suede for better grip on rope or webbing. Certified according to CE EN 388: 2016 4121X. Details:
    • Neoprene cuff against the ingress of dirt and moisture.
    • Reinforced cuff and lip.
    • Adjustable Velcro closure.
    • Very hard-wearing palm of synthetic suede with thermally stamped fingers.
    • Cast Vibram anti-friction patch in the palm of the hand.
    • Padded ankle.
    • Top material of breathable 4-way stretch.
    • TAA compatible.
    • Weight approx. 130 g / pair (size L).
    • Size key: S/7; M / 8; L /9; XL / 10; XXL / 11.
  • Not in stock - on order
    EMP magazine pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements.
  • The Warrior PRR Radio Pouch can hold 2 horizontal rows of MOLLE on any compatible carrying belt or bag.
  • Warriors Elite Ops Single 9 mm Direct Action Mag Pouch is compact and allows the cover to roll down and secure with Velcro to allow quick access to chargers. The bag can contain 1 horizontal row of MOLLE on any compatible carrying belt or bag.
  • The TacHook Tactical Hanger is purpose-built to hang, store and wear heavy equipment such as Body, Wearers, Tactical Vests, Backpacks, Fire Jackets, Tactical Pants and much more. The TacHook Tactical Hanger is made of copolymer for ultimate strength and durability. Each hanger has a payload of 64 kg (140+ lbs) and thanks to the i-beam design they are prepared to perform where regular hangers fail. The strongest and most reliable pendant there is 140+ payload multiple colors available 47 cm wide 30 cm high 2 cm deep lightweight only 226 g
  • Specialty Vent Gen II Coyote

    Beat the heat wherever your mission takes you. Extremely hot or humid conditions can cause sweaty hands, leading to loss of valuable control in the field. Special Vent Covert shooting gloves provide evaporative cooling when the heat is high with a fully ventilated design. Breathable mesh combined with a perforated 0.6mm palm to let cool air in and circulate through the glove. Specialty Vent shooting gloves with perforated trigger fingers and touchscreen capability, so you're always connected in the field. Features
    1. Low-profile thermoplastic rubber (TPR) closure ensures a secure fit around the wrist.
    2. Lightweight mesh allows cool air to circulate through the glove.
    3. Ventilated trigger finger.
    4. Ventilated finger-fourchettes.
    5. Microfleece sweat cloth.
    6. Anatomically stitched darts adapt to the natural curvature of the hand for an accurate fit.
    7. Expandable flexible joints improve overall mobility of the fingers.
    8. Ventilated palm of 0.6 mm with high finger sensitivity ensures cooling by evaporation.
    9. Palm and fingers with touchscreen.
    10. Nylon carry loops.
    11. You can go in the washing machine.
    INTENDED USE
    • Army
    • Police
    • Shooting sport
  • The next generation of FastFit® work gloves is here. Take control with extremely mobile 0.6mm synthetic leather and stay connected to touchscreen technology in the palm of your hands. The FastFit delivers an unparalleled fit with TrekDry ™ evaporation cooling to keep your hands cool and comfortable. Intended use
    • Maintenance and repair
    • Equipment control
    • DIY Home Improvement
    Features
    1. Form-fitting TrekDry® material keeps working hands cool and comfortable.
    2. Stretch-elastic cuffs ensure a firm fit.
    3. Reinforced thumb and forefinger provide extra durability.
    4. Anatomically designed two-piece palm design eliminates accumulation of material.
    5. Pinched fingertip construction improves fingertip strength and durability.
    6. Highly deft synthetic leather infused with touchscreen technology.
    7. You can go in the washing machine.
  • Not in stock - on order
    HIISI 4 The Hiisi 4 is a portable sauna tent for four people for outdoor use, easy to set up and almost anywhere to set up. The light weight and compact packaging size make transport and storage easy. Take it to the beach, deep forests, mountains or backyard and enjoy a good warming Finnish sauna session wherever you are. Stove and benches are sold separately! KEY FEATURES
    • Designed for four people
    • Easy to transport and set up
    • Compatible with the Savotta stove + stone rack
    • Fire retardants
    • Transport bag included
    • Includes centre pole, six corner poles and six poles
    • 2-year warranty on material and manufacture
    • Finnish Key Flag Product
    TECHNICAL SPECIFICATIONS
    • Weight: 8.7 kg (including all accessories)
    • Dimensions: 250 x 140/200 cm (D x H)
    • Pack size: 150 x 30 x 10 cm
    • Floor area: 5.4 m²
    • Materials:
    • Ceiling: 50/50 CO / PES ripstop (FR), fire retardant and mold resistant
    • Wall: 210D PA (FR), fire retardant and mold resistant
    • Piles: aluminium
    • Stakes: galvanised steel
    • Transport bag: 600D PES
    DETAILED DESCRIPTION The sauna has been a central and honored place in Finnish life for centuries, a place of birth and death, life and celebration. The word "hiisi" is old Finnish for a sacred place, a place of sacrifice or mystical power - the perfect family name for our sauna tents and accessories. The Hiisi 4 is built around the basics of our field camps, corner poles, telescopic centre pole, shaving lines and pegs. The canines are inserted into covers on the outside of the tent, which makes the interior a little less crowded. The ceiling and wall material is fire retardant for safety, but not fire resistant, so sparks and flames will burn holes in it, so be careful. The interior is large enough for two double sofas, totalling four people, and the stove. The stove is at the back, benches on the sides. The window at the back lets in some light and lets you enjoy the view out. Two zippers are used to close the door, which can also be rolled up and secured by two strips of Velcro. A piece of cord is attached to the centre of the ceiling, which is intended as a confirmation point for a sauna thermometer to help you keep up with the temperature and not overheat the tent. The tent, poles and poles can be neatly stored in a carrier bag for transport. Shoulder straps allow you to carry a backpack so you have your hands free for cookers or other accessories.
    INSTRUCTIONS - READ BEFORE USE! We recommend two to four people to set up the Hiisi 4. You need a hammer or similar tool to smash the poles into the ground. We recommend using a sauna thermometer of up to 100°C to prevent overheating and help you get the perfect temperature.
    1. Find a suitable flat spot about 3.5 x 3.5 m, beware of dangers: Dry grass and undergrowth, trees and branches (fire hazard). Uneven surface (heater or users may stumble and fall).
    2. Unseed and insert the corner sticks into the sleeves.
    3. Spread out the tent sheet with the sticks approximately at the place you want it to have.
    4. Set one or two opposite angles at the same time: Hammer a stick about in the ground. 140 cm from the corner. Attach the corner rope to the pole with a reliable knot. Repeat until all corners are in place and each shaving line is pinned to the ground.
    5. Install the telescopic center pole, use the pen to adjust it for the correct height and tension.
    6. Inspect the tent, correct if necessary by adjusting the poles, poles and ropes.
    7. Install heater and benches.
    8. If available, attach a sauna thermometer of up to 100 °C to the line hanging from the ceiling. The thermometer should hang 150 cm above the ground.
    9. Do not heat the Hiisi 4 above 75 °C, extreme overheating can damage the tent and is not necessary - it is steam that makes the sauna pleasant, not hot air.
    10. Enjoy (carefully)!
    WARNINGS - READ FOR USE! This sauna tent is designed to be heated with the Savotta wood stove and stone rack. If used incorrectly, the heated heater can cause numerous hazards and bodily injury:
    • Savotta sauna tents are not designed for long-term idling and must be disassembled, cleaned, dried and stored indoors between use. Sunlight will damage the substances over time. By keeping a tent upright for several months, it is damaged and any damage caused by this type of abuse is not covered by our warranty.
    • To prevent tent damage from falling sparks, the top of the chimney should protrude 100 cm above the chimney opening. We recommend firing hardwood to minimize the risk of sparks.
    • Although the substances are fire retardant and self-extinguishing, they are not fire resistant - sparks and flames will damage and burn holes in the fabric. Heater heated tents will in normal use incur some burnt holes due to sparks that touch the fabric. This is normal wear and tear and can be easily repaired if necessary. Our warranty does not cover fire damage due to normal or incorrect use.
    • Use only stones intended for sauna use. Incorrect stones can burst when heated and cause injury due to flying shrapnel.
    • Sparks and heat from the stove can ignite nearby combustible substances
  • Not in stock - on order

    RYPO Steady Aim

    Rapid height adjustment Keeps gun running firmly in place For easy cleaning and maintenance Rubber feet 62cm Length The Rypo Steady aim is the only one in the world with a length of 62 cm. The rifle is stiffer and due to its special dimensions the rifle is more comfortable in the hand.
  • Savotta JÄÄKÄRI L

    358,90369,95
    JÄÄKÄRI L The larger multi-day package of the Jääkäri family, capacity approximately 55 liters. Based on the Border Patrol backpack originally designed for the Finnish Border Patrol in the 1980s. Big enough for multi-day walks, but compressable to a compact day package if necessary. The PALS attachment system provides excellent scalability to the outside when you need it. Thanks to the generously padded, thermoformed shoulder belts and lap belt in combination with an internal tubular aluminium frame, the Jääkäri L can comfortably carry heavy loads. KEY FEATURES Content 55 l Padded shoulder straps with chest strap Padded detachable lap belt Main compartment with roll top and floating lid / li> Zipper compartment in the lid Internal hydration compartment Compression straps on the side Internal aluminium tube frame PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag Product TECHNICAL SPECIFICATIONS Weight: 2.4 kg Dimensions: 65 x 31 x 22 cm (H x B x D) Main material: 1000D Cordura Frame: aluminium tubes DETAILED DESCRIPTION Roll the top at the top, the zipper at the bottom and a cinch cord divider on the inside, so you can use the main bag any way you want. By opening the distributor, the main pocket is changed into a large hollow space. The zipper at the bottom provides quick access to the equipment you need most during the day, while the roll top ensures weatherproof protection for most of your gear. A zippered box in the lid provides secure storage for your wallet, keys, travel documents and phone. The roll closure, the floating lid and the compression straps on the side offer a wide range of adaptability to the volume of the backpack. Tie it tightly or loosen it, depending on the load transported. The compression straps ensure that additional equipment can be attached to the outside of the backpack if necessary. A hydration compartment is attached to the inner wall. A central hydration tube port allows you to guide your hydration bladder tube from behind your neck to both shoulders. With PALS straps on the lap belt, sides, lid and bottom of the backpack, you can attach extra pockets and equipment. This system offers numerous options for configuring the package to meet your specific needs. But not only for pouches, the PALS webbing strap can also be used to belts, shock cords, carbine hooks etc. To confirm. The lap belt can be attached to the backpack via PALS webbing. It can be moved up or down to adjust the back length of the backpack and can be removed from the frame for use as a stand-alone strap for equipment. With matching bags you can use them instead of or in combination with a small day pack. SUPPORT SYSTEM An internal tubular aluminum frame ensures that the backpack does not sag and transfers the weight of the backpack to your hips, even when loaded with heavy and bulky cargo. Both the shoulder harness and the lap belt are generously padded with thermoformed foam filling with closed cells. The shoulder harness is S-shaped and has a detachable chest strap. The adjustment of the back length is done by moving the lap belt up or down over the backpack using PALS bands. The forward pull rape adjustment is easy to secure, even under load. The buckle on the side provides quick and easy opening when needed. CONNECTION OF THE FINNISH BORDER GUARD In the late 1980s, Savotta designed a new patrol package for the Finnish Border Patrol, simply called "Rajapartio" - Border Patrol. This was the first package of Savotta with an internal aluminum tube frame, a very simple design that turned out to be very good. The Border Patrol package is still being used by the Finnish Border Patrol at the time of writing in 2019, a testament to how specially designed designs do not work. However, materials and manufacturing technologies are evolving, as are end-users' needs. The Jääkäri L is in our opinion a worthy successor to its ancestor.
Go to Top