-
Not in stock - on order
30 years of experience in building large military backpacks. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more searching for the right buckle to connect with. The depth of the backpack is small, but the width and lengths are long to carry what you need, but to be as close to your body as possible makes it easier to carry it. Shaped to sit nice and tight along the back. Stiff head hole and cut out in the lid so you can lean your head back when carrying the backpack. Shoulder pads are made of foam plastic and 1mm hard plastic for comfort and an even balance of weight. They have a chest strap and handset/microphone attachment. The main compartment has a large U-shaped opening with zipper to access the upper part of the backpack. The opening is covered with PALS on the outside. The sleeping bag compartment in the bottom of the backpack is also accessible through a U-shaped opening in the bottom of the backpack. This compartment is made variable in size so that a large sleeping bag fits in it. Two removable 11-litre side pockets with zippered opening on both sides that are accessible when you're on the backpack or in the tent. The side pockets can be connected as a backpack or worn separately. Top cover that can also be worn as a hip bag or small backpack. The top cover is designed to carry a spare sweater, mines, a drinking system, your administration book or something similar. 3L Zippered lid pocket for flashlights, spare batteries, insect repellent etc. Holder for a helmet, your poncho or something similar on top of the lid. Hip belt with plastic layer and sturdy foam for comfort and stability. It has steel O-rings so that a sled can be attached to it. The hip belt is attached in the middle, allowing you to move freely. Sled attachment points on the hip belt. Velcro patch for marking the owner. Roll up the ends of all the tires. The frame has been enhanced with a stiffer construction to make carrying the backpack even more comfortable. Size 100L Model: 29-01161C09-100 Weight: 5000 g Dimensions: 85 × 36 × 20 cm Color: Grey -
Not in stock - on order
The Snigel Snigel 15-20L all pack is a lightweight backpack that can be used in many different ways. In fact, it's a simple package with a semi-covered zippered opening. It has MOLLE/PALS tires at the front. The inside is covered with Velcro, so our pockets can be attached there (pockets not included). Elastic cord compression on the sides Outside Velcro stripes so you can attach your markings. The package can be attached to our large backs, on our ballistic and non-equipment vests. It can also be worn alone. Fits inside: All types of equipment; radio, medical supplies or personal equipment. It may be:- Worn as a shoulder bag.
- Worn as a backpack.
- Wear around your waist.
- Attached to an equipment vest or a plate carrier with I-bars.
- Attached to a large backpack
- Weight: 860 grams
- Volume: 10-20L
- Dimensions: 45 x 30 x 10 cm
- Colors: Gray, Multicam
-
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
The updated version of our 50L Mission backpack. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more trying to find the right buckle to connect with. The interior is colored light gray to make it easier to find what you're looking for without becoming a beacon, visible to the enemy. A classic backpack with a lid. Designed to match the natural shape of your spine. The lid can be removed and used as a hip bag. It has an outer and inner zippered pocket and an elastic shock cord at the top. Roll top opening/closing in the main compartment keeps snow and dirt out. The bag has a frame with a plastic plate and aluminum bars on the back to make it sturdy, but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap. Inner pocket and hanger for a drinking system. MOLLE strap on the sides of the backpack, to which more pockets can be attached. Two side pockets (26-02140A0-000) can be attached to the backpack with zippers (not included). On the back of the backpack, we added a holder that can be hidden inside the backpack or exposed to a helmet or other large piece of equipment. Padded hip belt with MOLLE strap to attach pockets. The belt can also be used as a lightweight combat belt. The hip belt is adjustable in height. Roll up the ends of all the straps to keep them tight. The Spoon sleeve, Double spoon garage and Curved Spoon are not included in the backpack. The pair of side pockets is not included in the backpack. Content: 50L. Article number: 29-00160B09-000 Weight: 2200 g Dimensions: 70 × 35 × 20 cm Color: Grey All fabrics, buckles and straps are IRR compatible! -
Not in stock - on order
Capacity = 50 litres Fits: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. functions: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment. The backpack can be custom made by the user for radio, first aid, photo kit/surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support on the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and handset/microphone attachment. Thick padded waistband. The bag is made of wear-resistant coated polyamide and has a sturdy zipper. Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. 4 compression straps on the side are sewn to the backpack. The loose ends of the side compression straps roll up and are fastened with Velcro. The bag has one carrying handle on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you need to store. The lower compartment is suitable for 15" field laptop/computer or supplement/replacement clothing. MOLLE webbing to attach bags/bags for first aid equipment, holders for radios etc. are placed on the outside of the outer pockets. An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A man pack radio can be secured with two straps close to your back for the best weight distribution and balance. Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Optional set of plug-in bags (65-01290A00-888) is ideal for organizing in the backpack for medical equipment. Optional rain cover in grey (65-01736A09-000) Optional snow cover in white (65-01736A26-000) -
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
Not in stock - on order
KEY FEATURES- Two full-length zipped side pockets in each side
- Attaches to the 50L Mission backpack 2.0 with zippers
- Can be worn together as a backpack or individually over the back.
- Can be worn individually around the waist.
- 6 webbing loops on the outside.
- 100% Nylon -PU coated
- All fabrics, buckles and belts are IRR compliant.
- The substance is FR.
- 2x11L
- H= 48, W= 21 & D=13 cm
-
Not in stock - on order
It is designed to carry and protect the Multipurpose pouch medium 10, Olive, but can also be used to wear and protect large lenses or other technical equipment. It has a stiff plastic layer around the sides to protect the contents of the bag. Shoulder strap MOLLE band on the sides Material: Polyurethane coated polyamide fabric Fits in it: NVG, large lens, camera, medical equipment or technical equipment Beware: Over your shoulder or around your waist functions: A simple bag with flap with zipper. Article number: ONVGP-10C Weight: 400 grams Dimensions: 14 × 18 × 23 cm Colors: Coyote Only available in color Coyote. Other colors are to illustrate the model. -
For the group medic or the technician etc. who wants to carry the required equipment on the equipment vest, around the waist, on the back, over the shoulder or attached to the back pack Large compartment with Velcro flap inside the bag Four small and zipped compartments in clear plastic inside the main compartment. Four elasticized compartments with Velcro closure on top of the main compartment One large and two small inside pouches in different colors are attached with Velcro to the bottom of the bag. Zipped closure with emergency closure buckle on the top. Two padded shoulder straps with chest strap to be used when carrying the bag as a backpack. Two long straps to attach it to the back of the equipment vest or to connect and use as a shoulder strap. Roll up ends with Velcro to keep the bands neat. Two short straps to secure it to the equipment vest or to secure it around the leg. Handle in the top to carry the bag in your hand. Outside Velcro stripes so you can attach your markings. Fits: Medical supplies or technical equipment Fits on: The equipment vest back, over your shoulder or around your waist Dimensions: H=33, W=30 & D=10 cm. Volume: 10L Weight: 1200 g -
Not in stock - on order
Duffel bag and backpack in one. The padded handles work as shoulder straps as well. A very large, zippered opening for easy access and overview of the main compartment. Two side compartments in the ends makes it easy to organize the packing, and are large enough for your helmet. One zippered smaller compartment inside the flap for equipment that you wish to tuck away. One grab handle in each end. Three windows and one large Velcropatch for patches. Loop Velcro fabric on parts of the interior where you can attach our insert pockets to get extra organized. Weight: 1000g Dimensions: H= 32 W=43 & L= 87cm Volume: 120L -
Not in stock - on order
The Princess is a lightweight, handy backpack for many missions. Carries all kinds of equipment; radio, medical supplies or personal equipment. With a stiff back plate and padded carrying straps, it can handle heavy loads, while still having a low profile. On the inside a fastening for a drinking system, with drinking hose ports on both sides of the backpack. A spacious inner pocket for the bladder or other objects that need to be separated from the main compartment. A large zipped pocket all over the back. MOLLE webbing for extra pockets etc. Dimensions: W=28 cm, H=43 & max D=20 cm. Volume: 15L Weight: 545g -
Not in stock - on order
A traditional backpack with flap.- Zipper compartment in the valve.
- Elastic cord on top of the flap.
- Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and attachment for handset/microphone.
- The shoulder pads can be removed.
- A ballistic plate or hydration bladder can be worn in the compartment in the back compartment.
- Run-up / closure in the main compartment keeps snow and dirt out.
- 2 removable MOLLE straps on the back of the backpack, where more bags can be attached.
- Velcro for identification patch.
- Band and elastic band for microphone for the section radio.
- The backpack can be attached to the back/top of our vests and board carriers.
- Roll up the ends of all the straps to keep them tight.
- Size: 30L.
- Dimensions: B = 27, H = 46 & D = 16 cm.
- Weight: 1100 grams
-
Beware: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. Can be attached to the tactical vest Features: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment The backpack can be custom-made by the user for radio or medical equipment. Ventilated back with plastic plate and aluminum support at back to make it sturdy but customizable Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone The shoulder pads can be stored behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap A ballistic plate or drinking bag can be transported in the rear compartment The bag is made of wear-resistant coated polyamide fabric and sturdy zippers Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened Push button in the main compartment ensures that the zipper does not open too much Four long compression straps on the side are sewn to the backpack The loose ends of the side compression straps are rolled up and fastened with Velcro The bag has two carrying handles, one on the side and one on the top Main compartment has two inner compartments with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment The outer compartments have a zipper and each has an elastic mesh pocket with zipper on the inside Modular webbing to mount bags/bags are placed on the outside of the outer pockets An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open A man pack radio can be secured with two straps close to your back for the best weight distribution and balance (straps not included) Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Access holes for radio or computer cables are placed on each side of the backpack The cable for the radio microphone is inserted through the access hole into the lower part of the backpack and then the microphone is attached to the shoulder pad Owner identification can be written on the Velcro The backpack is suitable for carry-on dimensions The backpack can be attached to the back/top of our modular equipment vest -10 and plate carriers. MOLLE tires on the sides. Capacity = 30 litres. 22L in the main compartment, 6L in the lower outer compartment and 2L in the upper outer compartment. -
Weight: 510 g Dimensions: H= 25, W=21, D=8 cm Volume: 3L Fits in: Medical supplies or technical equipment Fits on: The equipment vest, the specialist backpack or directly on the leg Features:The bag for the section. Adequate size for what you need but not too bulky on your leg.A well protected, versatile, light and flexible bag for first-aid, technical or other equipment that you want to keep in order. The bag is easy to fit on your belt or around your leg-
Just sufficient for the groups immediate needs
-
The bag is closed with a protected zip so the the contens won't fall out
-
While mounted on your leg the compartments in the bag are designed to work when standing or kneeling, to be as easy to work with as possible
-
There are compartments designed for first-aid kit or technical equipment
-
Outer compartment for scissors, surgical gloves and other equipment which first is used in an emergency. Sold without content
-
Other pouches can be attached on the outside of the bag
-
The bands can easily be mounted on your belt without opening your belt
-
The leg band is elastic and is closed with velcro to make sure the bag sits securly around your leg
-
Remove the leg band, the buckles and the attachment bands
-
Now you can weave it onto your vest
-
-
Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions. -
Not in stock - on order
A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.- Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
- Content: 50L.
- Dimensions: B = 34, H = 62, D = 22 cm.
- Weight: 1850 grams.
