- Highly complex lubricating oil for microceramic gun
- Electrostatically charged lubricating particles
- Without PTFE and silicones
- Tested and manufactured according to the latest scientific findings
-
Not in stock - on orderHeat-resistant pistol oil with microceramic additives, lubricates all types of guns. The Gold Series pistol lubricator oil is extremely resistant to water and reliably protects your weapon from loss of lubrication and wear, even in extreme situations, thanks to electrically charged micro-ceramic lubrication particles. The high-quality pistol oil ensures optimal performance of your gun, prevents jamming and ignition failures. Temperature resistant from -50° to more than +250° Celsius. Emergency running properties up to more than 1200° Celsius. Highest possible protection against corrosion and wear. Neutral compared to plastics and browning. PH level neutral. Ingredients:
-
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes
- Easy to use
- Good degree of blacking
- Fast results
-
SPECIAL DEGREASER & CLEANER Fluna GunDegreaser is a special cleaner and degreaser for removing oils, fats, waxes, but also pillows and other combustion residues. Fluna GunDegreaser can be used manually or in an ultrasonic bath. Attributes
- Cleans without residue and degreases at the same time
- Easy to use, does not affect rubber and plastics
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
The ULTRAIR Power Gas from ActionSportGames A/S offers high performance within a wide temperature range. The filling valves are specially designed and manufactured in aluminum, creating a strong filling valve that does not break or kink when used. The filling valve leaks very rarely when filling Airsoft pistols, this ensures a very low waste of gas. All ULTRAIR cans are correctly marked according to EU standards. Content: 570ml.
-
Not in stock - on orderWhether for handicrafts, home or hobby, for care, protection, cleaning or lubrication, at home, at work or on the go - Ballistol Universal Oil is the right oil for 1,000 cases and more. It is used as a rust protection, lubricating oil, care and cleaning agent and has excelled for more than 115 years with many excellent properties. BALLISTOL UNIVERSAL OIL:
- extremely creeping,
- sliding actively,
- does not wax,
- fully biodegradable,
- food safe,
- skin-friendly,
- completely harmless,
- environmentally friendly
- has a disinfecting effect.
- Material compatibility: rubber (oil resistant), wood, leather, metal/iron
- Cleaning: Removing unsuitable fats, removing unsuitable oils, removing gum-like oils/resin, descaling/cleaning connections/contact agents on poles, plug connections, tombac/copper, unwanted patina on copper, brass, stainless steel and aluminum is removed, infiltrated, dissolves rust
- Protect: preserved, corrosion protection / rust protection, neutralizes light acids such as hand perspiration
- Lubrication: creep oil, lubricating oil, cutting oil / drilling oil
-
The finest Teflon ™ /PTFE particles sprayed on to it:
- clean dry lubrication without attaching dirt and greasy hands,
- effective reduction of static, sliding and rolling friction.
- Ideal for rollers, bearings, slides, guide rails, telescopic conductors and much more. Suitable for all metal and plastic parts!
-
Electric GAMO compressor, portable all-in-one, up to 320 bar to fill the tank of your PCP. With 220V "charger" and car. With Gamo you can easily and comfortably fill your PCP; EconomicCompressor for PCP rifles 250 W· Maximum 320 bar, 3 loading phases; It's manual.· Voltage 220v, 220v charger (12V / 220V) or car connection· Weight: 9 kgExhaust air: 11 l / min.Rising air flow rate: 2700 r.p.m./min– 0.5 air cylinder. It takes 6 to 7 minutes from 200 to 300 bars– 0.5 air cylinder. It takes 18 to 20 minutes from 0 bar to 300 bar 110 – 220 VOnly to fill the "tank" of carbine or pistol, no large bottles.
-
Silicone oil is great for lubricating metal, rubber, plastic, wood and leather. Silicone has the pleasant feature that it is "dry", and therefore does not drip or drip. Silicone attaches strongly to all surfaces and provide protection for extended periods. Silicone is ideal for lubricating constructions in which a mixture of materials are used, such as metal and rubber and/or plastic. The oil reduces friction and dampens noise. Beeps and creaks disappear like snow in the sun. A layer of oil protects surfaces from -50 C to +200 C and therefore has a wide scope both at home and in the industry. Free of environmentally toxic substances and chlorinated hydrocarbons. Contains biodegradable solvents and ozone neutral propellant. Typical applications: Plastic gears, plastic gears, rubber bearings, cables, guardrails, rubber strips, window seals, conductors, rollers, slides Application: For use, shake properly. Spray on clean surfaces. Spray evenly at a distance of 25 - 30 cm. Wipe away excess product. Repeat the application if necessary.
-
The finest Teflon ™ /PTFE particles sprayed on to it:
- clean dry lubrication without attaching dirt and greasy hands,
- effective reduction of static, sliding and rolling friction.
- Ideal for rollers, bearings, slides, guide rails, telescopic conductors and much more. Suitable for all metal and plastic parts!
-
Not in stock - on orderTHE FLUNA TEC OPTIC CARE SET For anyone who wants to clean and care optimally for hunting and sports optics. With this set, you get all the products you need for professional cleaning of the optics, including anticondens for all lenses. The set contains the following individual products:
- Fluna TFT / optic cleaner 100ml (RETFT00701)
- Fluna isopropanol 50ml (RIS0050120)
- Fluna Anti Fog 50ml (ABG0050120)
- Microfibre cloth 40 / 40cm
- Glass polish 20/20 each packed
- On the back of the inlet is a detailed product description.
- The product description of the individual products in the set can be found in the relevant item.
- First, remove loose dust from the optics – preferably by "blowing out" with a jet of compressed air.
- Clean the optics with the Fluna TFT/optic foam cleaner. Turn off electrical appliances for cleaning. Apply foam cleaner evenly thin (leave briefly inactive in case of strong pollution). Dry brush with the clean microfibre cloth.
- After cleaning, spray the glass of the optics with the isopropanol alcohol, to defropher the surface. Divide the alcohol with the included glass cloth and wipe away the excess liquid. Let the surface dry for a few seconds.
- Then spray the product Fluna spray against covering evenly thin on the glass surface and let the flow substance in for about 2 minutes. Then take the glass polish cloth and brush the glass surface evenly for as long until there is no more liquid to be seen and the glass surface is evenly covered and streakless. Allow the coating to dry for at least 30 minutes. To you can breathe against the glass. If the coating is applied correctly, the mist should dissolve immediately.