- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes
- Easy to use
- Good degree of blacking
- Fast results
-
Use Fluna Gun Degreaser to clean the vessel from coarse dirt such as powder smoke, etc. Bring Fluna BORE PRO into the vessel, e.g. with a soaked felt pad or with a wet metal brush. Use a brushing stick guide. Make sure that the running steel is completely and evenly moistened. After the exposure time of approx. 15 minutes. moisten a metal brush (copper or brass) again with Fluna BORE PRO and push it in the barrel towards the bulkhead. Pay attention to caliber-precise brushes! With about 10 back and forth movements you brush away the metal deposits. Finally, wipe the barrel several times with clean felt pads or plasters and remove the deposit from the barrel. At the same time, the barrel is preserved by the remaining amount of Fluna BORE PRO, neutralization is not necessary. Alternatively, you can completely wipe the Fluna BORE PRO out of the barrel with Fluna Gun Degreaser and then preserve it as usual with Fluna Gun Coating. Attributes
- Cleans and preserves
- Very effective and fast results
- Harmless to running steel
-
Not in stock - on orderTHE FLUNA TEC OPTIC CARE SET For anyone who wants to clean and care optimally for hunting and sports optics. With this set, you get all the products you need for professional cleaning of the optics, including anticondens for all lenses. The set contains the following individual products:
- Fluna TFT / optic cleaner 100ml (RETFT00701)
- Fluna isopropanol 50ml (RIS0050120)
- Fluna Anti Fog 50ml (ABG0050120)
- Microfibre cloth 40 / 40cm
- Glass polish 20/20 each packed
- On the back of the inlet is a detailed product description.
- The product description of the individual products in the set can be found in the relevant item.
- First, remove loose dust from the optics – preferably by "blowing out" with a jet of compressed air.
- Clean the optics with the Fluna TFT/optic foam cleaner. Turn off electrical appliances for cleaning. Apply foam cleaner evenly thin (leave briefly inactive in case of strong pollution). Dry brush with the clean microfibre cloth.
- After cleaning, spray the glass of the optics with the isopropanol alcohol, to defropher the surface. Divide the alcohol with the included glass cloth and wipe away the excess liquid. Let the surface dry for a few seconds.
- Then spray the product Fluna spray against covering evenly thin on the glass surface and let the flow substance in for about 2 minutes. Then take the glass polish cloth and brush the glass surface evenly for as long until there is no more liquid to be seen and the glass surface is evenly covered and streakless. Allow the coating to dry for at least 30 minutes. To you can breathe against the glass. If the coating is applied correctly, the mist should dissolve immediately.
-
Brunox® Lub & Cor is a non-curing multifunctional product, which can be used anywhere, where long-term lubrication and long-term corrosion protection are desired. Brunox® Lub & Cor forms an even, non-curing film, which completely covers even the smallest corners and seams. Brunox® Lub & Cor also lubricates under high surface pressure. Brunox® Lub & Cor penetrates the hinged part and does not just lie outside on it. Use and operation: If:
- Quality lubricant, also for chains
- Corrosion protection
- protecting industrial structures, installations, machines, vehicles, antique cars, garden fences, tools, etc.
- lubricating chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, installations and many types of tools.
- Brunox® Lub & Cor is free of heavy metals and free of mineral acids
- Brunox® Lub & Cor does not drip
- Brunox® Lub & Cor compliant with USDA class 2
- Brunox® Lub & Cor complies with NSN 8030-25-100-4662
- Brunox® Lub & Cor can be removed with an anionic solution
- Brunox® Lub & Cor has a corrosion-resistant effect of approximately 1 to 11/2 years
-
Brunox® Lub & Cor is a non-curing multifunctional product, which can be used anywhere, where long-term lubrication and long-term corrosion protection are desired. Brunox® Lub & Cor forms an even, non-curing film, which completely covers even the smallest corners and seams. Brunox® Lub & Cor also lubricates under high surface pressure. Brunox® Lub & Cor penetrates the hinged part and does not just lie outside on it. Use and operation: If:
- Quality lubricant, also for chains
- Corrosion protection
- protecting industrial structures, installations, machines, vehicles, antique cars, garden fences, tools, etc.
- lubricating chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, installations and many types of tools.
- Brunox® Lub & Cor is free of heavy metals and free of mineral acids
- Brunox® Lub & Cor does not drip
- Brunox® Lub & Cor compliant with USDA class 2
- Brunox® Lub & Cor complies with NSN 8030-25-100-4662
- Brunox® Lub & Cor can be removed with an anionic solution
- Brunox® Lub & Cor has a corrosion-resistant effect of approximately 1 to 11/2 years
-
Brunox® Gun Care weapon maintenance spray is a special BRUNOX® product for cleaning weapons for hunting, shooting and weapon collectors. BRUNOX® is a Swiss quality product.PROPERTIESUSE
- Cleans, lubricates and maintains all metal parts
- Displaces moisture and protects against rust
- Dissolves powder, lead, tombak, copper and nickel residues
- Neutralizes hand sweat
- Excellent creeping characteristics; a thin viscose protective film is built up, which does not harden and does not harden
- Contains no silicone, Teflon or graphite
- Neutral to lacquer surfaces, leather, wood, rubber, plastic and textiles
- Prevents short circuit as contact spray
The addition TURBOLINE reduces the sliding resistance of all movable parts and thus ensures the function of repeating and automatic weapons, even at temperatures down to -55 °C. BRUNOX® Turbo-Spray® dissolves grease, organic and mineral dirt. BRUNOX® Turbo-Spray® contains only 3% propellant (CO2) and has a flash point of 78 °C. -
Not in stock - on orderThe Gun Care Set by Brunox is a portable set with maintenance and cleaning products for pistols, in a small polymer case. Inside are two pieces of Lub & Cor (liquid and aerosol) and Gun Care Spray. Easily take it to the shooting range and anywhere you need to clean your gun - it will fit in a pistol bag, toolbox or loose in the trunk. Gun Care Spray is a formula for cleaning, lubricating and caring for all types of weapons. It dissolves gunpowder, lead, tombac, copper and nickel residues and helps remove them. It then leaves an antistatic layer on the surface to protect against moisture, sweat and friction. The addition of Turboline® makes the coating last a long time and retains its properties at temperatures from -55°C to +78°C. Lub & Cor is a double-action lubricant and preservative: it ensures smooth operation of weapon mechanisms and protects them from corrosion. It easily penetrates into inaccessible places, and its protective properties remain for 5 months to 3 years (depending on the conditions of use of the weapon). For hunters and shooters. The practical cleaning kit for all ambitious users who value optimal and comprehensive weapon care. Including the complete care program. For long-term protection of the weapon. In a practical suitcase. Content
- 1x Brunox® Gun Care, 100 ml spray
- 1x Brunox® Lub & Cor, 100 ml dropper
- 1x Brunox® Gun Care, 100 ml dropper
-
Silicone cleaning cloth for weapons. A waterproof cloth that prevents fingerprints from rusting and weapons parts from being exposed to water. Breakthrough® Clean cleaning products are state of the art and make cleaning your firearms faster and safer. Features:
- 30 x 30 cm silicone wipe
- Prevents rust from fingerprints and exposure to water
- Military-grade breakthrough® solvent is odorless, colorless, completely dirt-dissolving, and evaporates completely, leaving no residue. The pH level is completely neutral, so it won't damage the wood, metal, plastic, polymer, cerakote, or water transfer parts of your firearm. In addition, unlike conventional solvents, Military-grade Breakthrough solvent has an ignition point of 65°C and is therefore considered non-flammable. The effectiveness of Breakthrough solvent is unmatched, dramatically reducing cleaning time while using less product.
- Battle Born oils are a blend of synthetic oils of the highest quality, treated with the most effective extreme pressure additives, corrosion inhibitors, antioxidants, anti-foams and anti-wear additives. This unique combination ensures maximum lubrication of firearms and protection in extreme environmental conditions. It is a multi-service and protective lubricant for long-term use under high and low temperatures. Suitable for use on all metal, plastic and polymer parts. Ideal for use on firearms, knives, bows and even fishing reels.
- Battle Born Grease is part of the most advanced lubricant technology. It is a versatile, superior quality synthetic grease Battle Born Grease is part of the most advanced lubricant technology. It is a versatile, top-quality product, a synthetic grease reinforced with submicron PTFE. This grease is a mixture based on pure synthetic oils, additives and shearable thickeners for maximum protection of firearms at extremely high and low temperatures. Can be used over a wide temperature range (from -60°C to +260°C)
- Breakthrough products are non-flammable despite their chemical constituents. In fact, a product is considered flammable if its flash point is below 55°C. The flash point of Breakthrough products is 65°C (150°F), i.e. 12°C above the requirements of the U.S. Military Standard (Mil-Spec).
- The freezing point of Breakthrough products is not yet known. They have been tested at a temperature of -120°C (-190°F) without freezing.
- Breakthrough products do not have a use-by date and have an unlimited shelf life.
-
Version 2.0 cleaning cords have an integrated T-handle for more effective cord pulling. The cords have an integrated bronze brush (1 for pistols and 2 for rifles and shotguns), which removes debris from the barrel. The extra-thick cord wipes away residue for superior cleaning. Easily detach the brass coupling from the flexible cable to wash the rope with soapy water if it gets too dirty. Battle Rope® 2.0 comes with a MOLLE-compatible protective holster – a must-have for your shooting bag! Features
- 20 gauge (shotgun)
- Cord with integrated folding pull handle (also serves as a weight to pull the rope through)
- Thick cord with 2 integrated bronze brushes for shotguns
- Detachable cable
- Semi-rigid storage case with zipper
- MOLLE or carabiner attachment included
- Dimensions: 15.2 x 11.4 x 3.8 cm
- Weight: 226 g
- Caliber 20