-
Not in stock - on order
The Warrior Assault System Single 5.56mm Open Mag Pouch is designed to be able to change magazines quickly, the plastic material inside also prevents the magazine from falling out, This allows the pouch to be used with or without elastic safety, 2 Molleband loops allow the attachment of an extra bag, for the following magazines: 5.56 mm M4, SA80 (not for G36). Dimensions: approx. 7 x 2 x 13.5 cm (LxWxH), Weight approx. 90 g. The WAS equipment bags are equipped with a Molle locking system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications. -
Warrior's Universal Strobe/Compass Pouch holds ACR MS-2000 uses ITW IR Clip for closure with elastic retention for added security. The pouch can contain 2 rows of MOLLE on any compatible carrying belt or bag. -
Warrior's famous Single Open D.A. 5.56 mm is now available with the addition of a 9 mm pistol magazine at the front. This "Kangaroo" bag can accommodate 5.56mm x 45mm M4-style metal and polymer warehouses. (NOT G36 warehouses). The main compartment is accessible via a bungee retension where the front gun warehouse is accessible via a Velcro closure. This has internal height adjustments to accommodate warehouses of different sizes. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE. -
The Warrior PRR Radio Pouch can hold 2 horizontal rows of MOLLE on any compatible carrying belt or bag. -
Warrior's Large Admin Panel is ideal to keep important paper/personal IDs safe. It has two pockets covered with a Velcro flap, a 9 mm pistol magazine and Velcro at the front for attaching a wide range of patches, eg blood type nationality flags etc. The large control panel takes up 4 rows of MOLLE on any compatible luggage carrier or bag. -
The Warrior Single Open 5.56 mm with shotgun strip has an elastic retention for fast, smooth charger changes, is low profile and contains room for 4 rounds of 12 caliber Hatton breaking shotgun shells/CS Marker rounds etc. The main compartment is lined with black non-slip posigrip material for additional warehouse preservation. Designed to contain both metal and plastic 30 round mags of 5.56 mm x 45 mm. -
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
Warrior's Gen 2 Smoke Pouch is more compact and streamlined. The bag of lace smoke and phosphorus grenades contain with the 38 mm lid that acts as an internal lift that provides easy access to the grenade. Warrior's single smake pouch can contain two horizontal rows of MOLLE on compatible carriers and bags. -
Designed for 1 x 0.338 Lapua 8.6 mm x 70 mm mag for the L115A1 / 3 AW and AWM. This Warrior case also comes with black PosiGrip lining. It can also contain 1 x .300 Win Mag (7.62 mm x 67 mm) Mag bag or 1 x standard 7.62 mm x 51 mm. The .338 single mag takes 3 horizontal rows of MOLLE on compatible carrier rigs and bags. -
Laser-cut elastic turnstile holder from Warrior Assault Systems for storing a C.A.T. turnstile. The Laser Cut Elasticated Tourniquet Holder is primarily intended for C.A.T. Turnstiles developed, but also fits on an S.O.F.T. Tourniquet, which is tight in the holder. The laser-cut material is made of high-quality composite laminate material. All threads are resistant to powdery mildew, UV light, water, heat and cold. All materials used have the lowest infrared values (99.8%) and are manufactured in the US according to US military specifications. material 500D Cordura®-nylon Details:- One-handed operation.
- Elastic bands on the side for compression and a secure grip.
- Closing flap with Velcro and reinforced finger loop.
- Laser-cut PALS mounting loop for MOLLE system (25 mm).
- IRR coating to reduce IR signature.
- Dimensions: approx. 11.5 x 4.5 x 3.8 cm.
- Weight: approx. 30 g.
-
The Single Quick Mag is a versatile multifunction loader bag that can hold a variety of 5.56mm warehouses, including P-Mags. The Quick Mag Pouch from Warrior Assault Systems can also contain 7.62 mm x 39 mm AK mags M14 FAL etc. The size can be adjusted by means of a laced elastic cord that is strung through the side of the bag. Comes with optional bungee retention tabs as seen on the Warrior Assault Systems Open Mag bags for operators who need extra security from their warehouses. -
Not in stock - on order
EMP magazine pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
The Warrior Assault System Double 9mm Direct Action Mag Pouch can be used with and without a magazine lock, the plastic material on the inside in combination with the elastic band on the side prevents the warehouses from falling out, the warehouse safety can be opened with Velcro and fleece tape.- Dimensions: approx. 10 x 2.5 x 11 cm (LxBxH),
- Weight about 120 grams.
-
Double 5.56mm Magazine from Warrior. Suitable for M4 and SA80 magazines. The Double 5.56mm Open occupies 4 horizontal rows of MOLLE on compatible carry straps and bags. -
Warriors new H&K 417 Open Mag Pouch is designed for Heckler and Kochs 20 Round Composite Magazine. Retention is through 8mm bungee cord for quick and easy access. MOLLES on any Warrior Strap Chest Rig or Carrier. -
Warrior's Medium Horizontal MOLLE Pouch is ideal for carrying a variety of accessories or Medic Kit, etc. This bag takes up 5 rows of MOLLE on each compatible chest strap or bag. SIZE High - 5.5 in (14cm) Wide - 8.6in (22cm) Deep - 3in (7.5cm)
