- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Niet op voorraad - op bestellingWeight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features
-
Niet op voorraad - op bestellingEen nauwsluitende vlamvertragende muts die onder een helm kan worden gebruikt. Lichtgewicht en dun om comfortabel te zijn in de meeste situaties, maar toch warm genoeg om te beschermen tegen de kou. Flatlocknaden voor meer stevigheid. Materiaal: 59% Modacryl/29% FR Polyester/9% Katoen/3% Elastaan
-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included.
-
Niet op voorraad - op bestellingSafe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch
-
Stores 2 x 30 round 5,56 magazines
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments.Low cut front for fast access. Large flap for dirt protection. Inside elastic band to secure one magazine. Eyelet in the bottom to let water out.Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
Niet op voorraad - op bestellingFor 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g
-
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.
- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves
-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g
-
Niet op voorraad - op bestellingA small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g
-
Niet op voorraad - op bestellingA small backpack or pouch for your ballistic plate.
- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Niet op voorraad - op bestellingDe SnigleDesign is een must have pet voor de fans die graag op de schietstand hun hoofd bedekken of in de winter zich willen beschermen. Verkrijgbaar in maat Large en Medium.
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt
-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch
-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Niet op voorraad - op bestellingA band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g
-
A well designed belt to improve your comfort when you carry a normal loadWeight: 250 g Fits: All pouches and holders Features:
-
Plastic reinforced
-
One belt construction
-
3 point security buckle, prevents unwanted opening
The belt fits the following waist measurements:Small: 75-103 cmMedium: 85-113 cmLarge: 95-123 cmXLarge: 105-133 cm -