-
Beware: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. Can be attached to the tactical vest Features: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment The backpack can be custom-made by the user for radio or medical equipment. Ventilated back with plastic plate and aluminum support at back to make it sturdy but customizable Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone The shoulder pads can be stored behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap A ballistic plate or drinking bag can be transported in the rear compartment The bag is made of wear-resistant coated polyamide fabric and sturdy zippers Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened Push button in the main compartment ensures that the zipper does not open too much Four long compression straps on the side are sewn to the backpack The loose ends of the side compression straps are rolled up and fastened with Velcro The bag has two carrying handles, one on the side and one on the top Main compartment has two inner compartments with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment The outer compartments have a zipper and each has an elastic mesh pocket with zipper on the inside Modular webbing to mount bags/bags are placed on the outside of the outer pockets An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open A man pack radio can be secured with two straps close to your back for the best weight distribution and balance (straps not included) Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Access holes for radio or computer cables are placed on each side of the backpack The cable for the radio microphone is inserted through the access hole into the lower part of the backpack and then the microphone is attached to the shoulder pad Owner identification can be written on the Velcro The backpack is suitable for carry-on dimensions The backpack can be attached to the back/top of our modular equipment vest -10 and plate carriers. MOLLE tires on the sides. Capacity = 30 litres. 22L in the main compartment, 6L in the lower outer compartment and 2L in the upper outer compartment. -
The Stryke pants with Flex-Tac ™ is another groundbreaking pants exclusive to 5.11® Tactical. Flex-Tac ™ is a 5.11® fiber with built-in stretch and a dirt-repellent coating. The Stryke pants with Flex-Tac ™ has aggressive styling and proven 5.11® Tactical comfort and durability. Flex-Tac ™ is a high-quality fabric developed exclusively by 5.11® Tactical. This exclusive fabric mix combines all the excellent properties and benefits of the different trouser fabrics. This lightweight, breathable polyester/cotton ripstop includes mechanically stretchy yarns, achieving the elasticity and elasticity of the fabric without the use of elastane. Therefore, this fabric sets new standards in terms of breathability, color fastness and durability compared to other cotton/elastane fabrics. Details:- 2 stab bags.
- 2 back pockets with Velcro.
- 2 sloping low-profile cargo bags with subdivision and Velcro closure.
- 2 bags for mobile phones and chargers.
- Comfortable elastic waistband.
- Prym® press-stud and YKK® zipper.
- Thanks to the teflon coating, dirt and moisture roll off the surface.
- Belt loops on the front for attaching badges.
- Compartment for neoprene knee pads.
- Weight: approx. 655 g (size 32/32).
-
The Mechanix M-PACT® Agilite Edition is the ultimate tactical glove. It was jointly developed by Agilite and Mechanix as a custom project for Tier 1 Special Forces who wanted the best of all worlds – the protection of a Mechanix M-Pact Covert glove but the tactile capabilities of a fingerless glove. Exclusive to Agilite, the MPACT Agilite Edition is the only glove like this in the world and has been tested and proven by the best of the best. The M-PACT Agilite Edition protects military personnel and law enforcement with EN 13594-rated impact protection. D3O® palm padding dissipates high-impact energy to reduce hand fatigue when fully engaged. The semi-fingerless design adapts to your hand like a full glove, still giving you the dexterity and control of bare hands where you need it most; for your trigger finger, finding a wrist, changing ammo belts, comfortably using smart devices, or other mission-critical tasks. Specs- EN 13594 nominal impact protection.
- Thermoplastic rubber (TPR) closure ensures a good fit on your wrist.
- D3O® palm filling absorbs shocks and vibrations.
- Breathable TrekDry® keeps your hands cool and comfortable.
- Armortex® palm reinforcement.
- Durable synthetic leather palm with touchscreen technology.
- Breathable TrekDry holds.
- Nylon carry loops.
- Co-developed by Agilite and Mechanixwear to meet the requirements of a particular Special Forces unit.
- Available exclusively at Agilite.
- Gives you the dexterity of a fingerless glove but the protection of the industry-leading Mechanix M-PACT® Covert glove.
- Tested and proven by Tier 1 and other agents.
- D3O® palm filling absorbs shock and vibration.
- Semi-fingerless design provides maximum dexterity.
- Breathable TrekDry® keeps your hands cool and comfortable.
- Armortex® palm reinforcement.
- Machine washable.
- Nylon carry loops for storage.
-
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
-
The 5.11 Tactical® Quantum TDU® Pant is comfortable combat pants in a tactical style with essential functionality. The trousers are made of three different stretch fabrics for maximum flexibility and durability. It has 8 compartments in which all necessary utensils can be stored. The comfortable waistband and stretch cross construction provide ultimate freedom of movement. Material Material 1: 71% polyester, 29% cotton (FlexLite Ripstop, Teflon® coating); Material 2: 100% polyester (Fast-Tac® Ripstop); Material 3: 87% polyester, 13% elastane (4-way stretch); YKK® zipper; PRYM® push button Details:- 3 different fabrics for maximum flexibility.
- Water-repellent Teflon® coating.
- Specially cut cross for more freedom of movement.
- Comfortable elastic waistband.
- Reinforced seating area.
- Preformed and reinforced knees with a insert for neoprene knee pads (optional).
- Gulp with YKK® zipper and PRYM® button.
- 2 hand pockets with clip reinforcements.
- 2 back pockets with Velcro.
- 2 thigh pockets with Velcro and insert bag on the inside.
- 7 reinforced belt loops (55 mm).
- Weight: approx. 510 g (size 32/30).
-
Not in stock - on order
The K5 Plate Carrier is the most comfortable Plate Carrier on the market. Lightweight, durable and proven by SOF around the world, the K5 doesn't skimp on shoulder or bottom plate padding like many plate carriers, so it stays comfortable during prolonged use. We know that missions or training exercises are rarely "fast and dirty", which is why comfort throughout the days and nights in your board carrier is crucial. The K5 comes standard with the Agilite Stretch tummy strap so your vest can be pulled nice and tight so it doesn't bounce while running, but the stretch element gives you the inches or so you need when you fall on your knee. the carrier does not crush your torso. The K5 design is unique in that the shoulder straps create a conciliatory "V" shape relative to the mass, dividing the weight over the maximum surface and illuminating pressure points. The K5 has a number of subtle but crucial features that make it better than other providers, including the ability to connect the AMAP II or AMAP 30 Assault packs directly to it in seconds. No getting MOLLE, no hassle. • Now with wider velcro pattern • Own "V" design distributes the weight over the maximum surface from the shoulders to the mid-mass area to avoid pressure points. • Includes stretchy abdominal strap • Zippered administrator bag • Fusion foam shoulder padding for comfort during prolonged use • Drag handle at the back • Skeletal shoulders for communication and hydration hoses • Laser-cut Velcro panels front and rear • Compatible with Agilite K Series ™ • 1000D Mil Spec tactical nylon • Mil Spec polymer buckles and hardware • Laser-cut Velcro MOLLE overlay panels • Fits on SAPI /ESAPI plates up to 1" thick • Opt for 10 "X12" plate size Large • Made in Israel • Weight: 2.2 lbs (1 kg) including elastic abdominal band This plate carrier was replaced by the improved Agilite K19 plate carrier: https://shop.afullmetaljacket.com/product/agilite-k19-plate-carrier/ -
Not in stock - on order
Tactical pouch with flap for a 21" baton with the ability to store the ejected baton. Depending on the context, the top flap of the pouch may be placed differently. CHARACTERIZE:- Top holding flap with loop to grip
- Small flap at the bottom for storing the opened baton
- MOLLE fastening system
- Stackable bag with MOLLE loops at the top
- Fastening strap to secure the stick
- 500D nylon
- Dimensions: 21.6 x 3.8 x 2.5 cm
- Weight: 70 g
- Color: black (019)
-
**AGILITE JUMP RETENTION TABS™ COME IN A SET OF 3** Say goodbye to the threading/knots of bungee cords and pull tabs that then get in the way. Agilite Jump Retention Tabs™ can be immediately put on and taken off on the Pincer™ Placard and anywhere you have hook & loop. They provide additional rock-solid retention for warehouses or other items during air or other particularly turbulent operations. They incorporate Agilite's patented AG™ polymer pull tab technology so that, even when applied, you can access your magazines unhindered and with one hand. Details- Agilite Jump Retention Tabs™ provide immediate, rock-solid retention of magazines or other items without the need to string or tie bungee cords.
- Optimized for the Agilite Pincer™ Placard, but can also be used with other Placards or equipment with hook and loop
- Attach/remove to any tactical hook or loop equipment in seconds during air or other particularly turbulent operations, so you never lose a magazine.
- Built-in AG ™️ polymer pull tabs for unhindered, one-handed pulling/inserting magazines
- Weight: 0.05 kg
- Hook attachment external, loop attachment internal
-
Not in stock - on order
With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details- This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
- Consists of 1 central attachment and 2 connecting buckles
- Can be quickly and easily installed on or removed from any plate carrier
- Once installed, you can turn AMAP III on and off in seconds
- Equipped with loop/buckle attachment points to make the wearer Agilite-compatible
- 1 size
- Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)
- Height: 30cm (11.8")
- Width: 15cm
- Depth: 8mm
- 500 Denier Mil Spec Tactical Nylon
- Mil Spec Plastic Hardware
- Fits any plate carrier with 6 horizontal MOLLE loops (or more)
-
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features- Two-point sling for assault rifles and similar small arms
- Thin 35 x 4 mm foam filling with closed cells
- All metal hardware (steel and aluminium)
- Quick loop adjustment slider for grip on webbing
- Pulling forward lengthens the sling and moves the support hand forward
- Front quick adjustment loop can be adjusted to the desired length
- A continuous piece of 25 mm/1" runs through the entire sling
- The ends of the sling form 25 mm/1" loops for universal attachment
- 5-year material and manufacturing warranty
- Gemaakt in Finland
- Weight: 115 grams
- Length: 185 cm (detached to max. length)
- Webbing: 100% polyester
- Fabric: 500D Cordura (100% polyamide)
- Slider for quick adjustment: aluminum
- Buckles: steel
-
Not in stock - on order
The updated version of our 50L Mission backpack. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more trying to find the right buckle to connect with. The interior is colored light gray to make it easier to find what you're looking for without becoming a beacon, visible to the enemy. A classic backpack with a lid. Designed to match the natural shape of your spine. The lid can be removed and used as a hip bag. It has an outer and inner zippered pocket and an elastic shock cord at the top. Roll top opening/closing in the main compartment keeps snow and dirt out. The bag has a frame with a plastic plate and aluminum bars on the back to make it sturdy, but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap. Inner pocket and hanger for a drinking system. MOLLE strap on the sides of the backpack, to which more pockets can be attached. Two side pockets (26-02140A0-000) can be attached to the backpack with zippers (not included). On the back of the backpack, we added a holder that can be hidden inside the backpack or exposed to a helmet or other large piece of equipment. Padded hip belt with MOLLE strap to attach pockets. The belt can also be used as a lightweight combat belt. The hip belt is adjustable in height. Roll up the ends of all the straps to keep them tight. The Spoon sleeve, Double spoon garage and Curved Spoon are not included in the backpack. The pair of side pockets is not included in the backpack. Content: 50L. Article number: 29-00160B09-000 Weight: 2200 g Dimensions: 70 × 35 × 20 cm Color: Grey All fabrics, buckles and straps are IRR compatible! -
Not in stock - on order
Badge textile sniper olive / black of the Bundeswehr. -
Whether you need a rock-solid, reliable, yet muted boot for patrol or deployment, the 5.11® Fast-Tac® 8" boots fit perfectly. The Ortholite® footbed gives you a cooler, drier platform, with improved cushioning that you immediately feel every time you put on this boot. The upper made of 840D nylon is resistant to wear in the most intense environments. Count on the slip-resistant sole to keep you stable. Shop the Fast-Tac™ Uniform Collection. Material Upper: leather, 840D nylon. Sole: rubber. Details:- Upper made of full leather and nylon.
- OrthoLite® insole.
- Sole with oil and non-slip.
- Antimicrobial treated.
- Polished nose.
- 17 mm drop (height difference from heel to forefoot).
- Height shaft: 20 cm.
- Weight: approx. 840 g / pair (size 42).
-
Warriors-Single pistol mag pouch is suitable for a standard 9 mm magazine True MultiCam US tyre (with a breaking strength of 1200 lbs) US Thread treated against mold and UV light -
A gray and black patch with the text EOD. 50 x 25 mm. Hook Velcro at the back so the patch can be attached to pouches and bags with loop Velcro. -
JÄÄKÄRI M
The medium day backpack of the Jääkäri family, capacity approximately 30 liters. The Jääkäri M is an improved model of the Light Border Patrol backpack, originally designed for the Finnish Border Patrol. The sleek design offers unhindered movement in tight spaces and difficult terrain. The PALS fastener offers many options for fitting extra pockets and equipment on the outside of the backpack. An internal plastic frame blade gives the backpack stiffness, while the compression straps help you tie your load up to a tight package. As part of the Border Guard heritage, the shoulder straps, the lap belt and the back lining are designed to be more comfortable to wear than most backpacks of this size. KEY FEATURES Content 30 l Padded shoulder straps with chest strap Padded hip strap Main compartment with floating lid and side zip Zipper pocket on the inside of the lid Internal hydration compartment Compression straps on the side Internal plastic frame sheet PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag product TECHNICAL SPECIFICATIONS Weight: 1.75 kg Dimensions: 52 x 25 x 17 cm (H x B x D) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Frame plate: HDPE DETAILED DESCRIPTION A collar with drawstring covered with a floating lid closes the main compartment at the top. A full-length side zip provides quick access to smaller items stowed in the main compartment. A zippered pocket on the inside of the lid provides secure storage for your wallet, keys, travel documents and phone. The floating lid and compression straps on the side offer a wide range of adaptability to the backpack's capacity. Fasten it tightly or loosen it, depending on the load carried. The compression straps ensure that additional equipment can be attached to the outside of the backpack if necessary. External side pockets at the bottom can be used to provide tools, tripods etc. Secure to the sides of the backpack. A hydration compartment is attached to the inner back wall. Tube ports on both sides allow you to guide the drinks long from the left or right, while the other port remains free for other uses, such as antennas or cables. With PALS straps on the backpack's lap belt, sides and lid, you can attach extra bags and equipment. This system offers numerous options to customize the package to your specific needs. Not only for pouches, the PALS band can also be used for attaching utility straps, shock cord, carbine hooks etc. Four singelluses at the bottom can be used to attach utility straps. MILITARY GRADE MATERIALS Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defense and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The tires and edge tape we use are, again according to the FDF specifications, strong polyester bands in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as standard, as should be since the same materials are used in official military equipment. SUPPORT SYSTEM The Jääkäri M has an internal frame of plastic plate, giving it the necessary stiffness to stay upright when loaded with clumsy and bulky equipment. Both the shoulder harness and the lap belt are tightly filled with foam with closed cells. The shoulder harness is S-shaped and has a detachable chest strap. The forward-pulling lap belt is also easy to put on under load. The buckle on the side provides quick and easy opening when needed. The lap belt is equipped with an additional cushion for lower back support. CONNECTION OF FINNISH BORDER GUARD In the early 1990s, a compact Savotta walking backpack, simply called the "608", was chosen as the starting point for the design of a new day backpack for the Finnish Border Guard. This then changed to the 'Kevyt Rajapartio' or Lightweight Border Patrol backpack, a very modern backpack for its time: narrow design for mobility, side zipper, compression belts and rifle fastening. Most striking was a very sturdy carrying system and an aluminum reinforced frame - something you rarely see on packaging of its size. This venerable design was chosen in 2013 as the basis for the development of what would become the Jääkäri M, the first in the modern range of Savotta packs with a construction and functionality of military quality. This worked out very well and the Jääkäri M was followed by his siblings: the Jääkäri S, L and XL.
