Tactical - Page 20 of 23 - A FULL METAL JACKET SHOP

Mechanix Wear The Original M-Pact Coyote

€39,95
Make an M-Pact® in the field. The next generation M-Pact tactical gloves protect soldiers and law enforcement officers with EN 13594-classified impact protection. Take control with 0.8mm synthetic leather and stay connected to touchscreen technology in the palm of your hand. The M-Pact features D3O® palm filling to drain powerful energy and reduce hand fatigue when you're fully engaged. Features The shock protection of thermoplastic rubber (TPR) meets the EN 13594 impact standard. Thermoplastic rubber (TPR) protection against bottleneck at the fingertips. Closure of thermoplastic rubber (TPR) ensures a firm fit on your wrist. Breathable TrekDry® keeps your hands cool and comfortable. Armortex® palm reinforcement. Internal fingertip reinforcement supports extreme wear resistance. Durable palm of synthetic leather infused with touchscreen technology. D3O® palm filling absorbs shocks and vibrations. Nylon carry loops for storage. You can go in the washing machine. INTENDED USE

Army

Police

Shooting sport

Maintenance and repair
Select options Details
UphillSport KLICKS Tactical M4 Active Comfort with Merino

€19,90
UphillSport KLICKS Tactical M4 Active Comfort sock with Merino for long walks. Features & benefits

Elastic shaft - Stays in place and stabilizes pressure

Seamless toe and fitted heel - Prevents blisters

Around merino - Very warm and comfortable

Weight: 77g

Materials:

48% Merino

wool33%

Polyamide19%

Polypropylene

Maintenance All socks are suitable for a machine wash at 40 degrees. Drying in the tumble dryer is not recommended. Socks may appear smaller after washing - it is recommended to reshape the socks after washing for a better fit. Many socks have elastic yarns and therefore they can appear smaller than they actually are. The properties of Merino wool become even better after use and washing. UphillSport socks are made to last, good maintenance makes them last even longer. Made in Finland in the factory of Sukkamestarit Oy. The production is ISO9001:2015 certified. All yarn materials are OEKOTEX 100 certified. Attributes

Breathable

Appropriate

Thermal

Seamless toe
Select options Details
UphillSport Arctic Tactical H5 Extra Thick Active Fit Merino

€39,90
Uphillsport Arctic is designed for the harshest cold conditions. Ice and snow give off frost and cold towards your boots. The Arctic sock is inspired by this humid, cold, icy and windy climate of the Arctic terrain. This climate places high demands on your clothing - the Arctic sock meets this challenge. The special thickness of merino wool keeps the cold out and exhales the moisture. Merino wool keeps air inside for ventilation and insulation, and keeps the frost out of the boot. The Arctic sock is designed to dry quickly at night and does not absorb sweat and odor. The high wool percentage guarantees a high thermal degree and many days outdoors without freezing. Our Merino wool is always mouse-free and adds warmth and breathability. Uphillsport Arctic socks are made with a thick merino wool structure for extra heat and moisture absorption - this guarantees great breathability and warmth. You can be outside in the most extreme freezing cold or strong winds. The shaft of the Arctic sock is knitted with merino wool 1 x 1 structure with extra thick merino wool and Lycra. Your feet are warm and dry; the shaft warms your legs and absorbs moisture from the underfoot. Arctic has a thermal degree of level 5. The foot section of the Arctic Sock has a fitted heel. This ensures a good fit and adds comfort by keeping the sock wrinkle-free in place. No more freezing with Arctic socks. You can use Arctic solo or combine it with our Contact liner or Combat sock for even more warmth. Arctic is made at calf length to fit well above the boot. The Arctic sock is available in khaki, green and black in all sizes. Highlights:

Arctic is perfect for very cold and humid conditions. Arctic has a high calf length to warm both the leg and foot - this sock is available in khaki, green and black in all sizes.

Arctic socks are made with lots of extra thick merino wool for extra heat and moisture absorption - this guarantees great breathability and warmth.

Arctic socks are knitted as a sock that can be used alone or with a lining - Your feet are warm, and moisture is absorbed from the skin

Arctic socks are the thickest sock of Uphillsport. This sock contains elastic extra terry - This improves the support of the whole foot and leg, and adds comfort by holding the sock in place, wrinkle-free.

The heat class is 5, ideal for cold and humid conditions - Merino is knitted over the entire sock as terry cloth; this increases the softness and comfort in the sock. Merino also adds breathability

Features and benefits

Merino all around - Very warm and comfortable

Fitted heel - Gives good support

Strong lycra on the entire shaft - Stays in place well and stabilizes pressure

Materials

Weight: 195 g

74% Merino wool

25% Polyamide

1% lycra
Select options Details
Not in stock - on order

Smith & Wesson Military & Police® Tactical Pen

€44,90

Smith & Wesson® Military & Police® Tactical Pen is made of CNC machined T6061 aircraft aluminum and features a pop-off pen cap with a lanyard hole and pocket clip. The pen contains a Schmidt P900M Parker style black ballpoint ink cartridge. Features: Total length: 6.1" Weight: 0.0875lb Material: CNC machined black T6061 airplane aluminum

Details
5.11 Tactical Flex Admin Pouch

€39,95
With the smart features of the 5.11 Tactical Flex Admin Pouch, you can store your tools organized and safely. In addition, it can be attached to all platforms with the Flex-HT™ Mounting System's 1/2" webbing ladder and 3/4" TPU coated straps. Dimensions 11.4 x 15.8 x 2.5 cm Attributes

Minimalistic, low profile and lightweight admin pouch

Horizontally oriented laser cut MOLLE loop platform

Main compartment with zipper and shock cord for adjustable opening factor up to 180 degrees

Drawstring with heat shrink tubing and a paracord loop trigger holder

2 small and 1 large mud bag on the back panel with elastic bands

Adjustable bungee cord on front panel for phone or other accessories

Extra slip bag behind front panel

Flex-HT™ 1/2" webbing ladder for more weaving possibilities

Flex-HT™ 3/4" TPU coated strap for flexibility on all weaving platforms

Pull tab for quick detachment of Flex-HT™ straps

Flex Hook Adaptors convert the bag to a hook/loop attachment (2 included)

Double layer water resistant 500D Nyl
Select options Details
Magpul MOE-K2+ ® Grip – AR15/M4

€31,45
The Magpul MOE-K2+ ® pistol grip is designed to replace the original AR15/M4 pistol grips. It improves ergonomics with a more vertical grip angle and has a very comfortable rubber grip in all conditions. The handle also has a small hatch for storing small items such as bullets, a mini cleaning kit, paracord, batteries etc. .... Features

For AR15/M4 pistol grips

More vertical grip angle than standard A2 handles

One-piece polymer construction with rubber casing.

Internal basic storage with hatch, but accepts different storage cores (optional) for custom storage

Weight: 88 g

Dimensions: 10.4 x 3 cm

Made in the USA

* Works properly with 7.62 NATO AR10/SR25 rifles, but depending on the brand, there may or may not be a gap between the "tail" and the frame. This hole is purely cosmetic and has no influence on the effect.
Select options Details
Agilite Team Wendy EXFIL Bump LTP/Carbon Helmet Cover

€81,95

The Agilite Team Wendy Helmet BUMP Cover protects the integrity and painted surface of your Team Wendy BUMP helmet, extends its life and gives you full accessory management. It fits like a glove on the Exfil shell and is suitable for both the Exfil Carbon and the Exfil LTP helmets, so you have a perfect fit for both. Unique features of the cover include the left and right cable routing channels, smooth, zipper-free sides and an upper bungee accessory management area for IR flashes, cameras, etc.dat features mil-spec polymer holders with laser-engraved Agilite scorpions. The mesh portion of the cover is strategically placed to allow free airflow into the helmet's ventilation holes and keep you cool within range. The cover also has an exit at the back, so the Team Wendy Exfil rear 'V' shaped shock cord can be removed and used even when the cover is on. The cover also extends over and protects the front lip of the helmet, which is a vulnerable spot and usually the first spot where the paint peels off. The Agilite Team Wendy Exfil BUMP cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry-compliant version is also available for bulk orders on request. Sizing - Team Wendy EXFIL Bump LTP/Carbon helmet cover available in 2 sizes: M/L and L/XL - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet ((Rails 2.0 & 3.0) Specs Weight: 5oz (143g) - 1000D tactical nylon - Flat Polyester Mesh 380g/m2 - Laser engraved polymer bungee channels - Back loops for AA and CR123 NVG batteries - Made in Israel Details - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet (Rails 2.0 & 3.0) - Agilite precise fit - Next generation lower profile central bungee retention for IR flashes, cameras etc. - Integrated cable management channels - Full spectrum, rock-solid accessory platform - Easy installation - can be mounted on the helmet in seconds ATTENTION: Rear pouch not included. You can order it separately here.

Select options Details
Not in stock - on order
Agilite Logo Patches

€7,10
Tactical Agilite patch

Silicone, Hook & Loop Tactical Agilite Logo Patches

in Coyote Tan, Black, and Ranger Green
Details
Not in stock - on order
Agilite 2M ROC Quick-Release Buckle Set

€18,95
With the quick-release fastener set, you can put on and take off your record in a matter of seconds.

Donning and doffing in seconds

1-hand operation

Self-cleaning ports
Details
Masters of Gloves Target Combat

€58,95
The development of our new synthetic and lightweight combat glove is based on the key features of the Target Light Duty gloves, which offer maximum dexterity and wearing comfort, allow perfect control of weapons and are enhanced with the proven and advanced technology of the D3O® impact protection. The Target Combat is an extremely finger-sensitive and slim fit tactical glove that is equipped with the MoG/AX ® DexSuede and D3O ® impact technology. Main features :

Palm made of DexSuede - a very thin synthetic suede that offers maximum dexterity and dexterity.

DexSuede also protects the user from 100-degree contact heat for 10 seconds.

The fingertip stitched slim finger construction provides extremely high dexterity for perfect weapon handling, control of radios and delicate equipment

Reinforcements on the trigger guard for more durability, dexterity and wearing comfort.

2 flexjoints on the index finger for maximum flexibility when handling weapons

C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your gun.

Thumb construction for reloading - reinforced thumb piece and specific design for perfect reloading of magazines.

Reinforced patch on the heel provides extra strength against friction during use.

Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.

D3O® knuckle protector with impact protection level 1 - covered with a double layer of Cordura® stretch for durability and abrasion resistance.

Comfortable neoprene cuff with cut-out for watches - fits very well on the wrist for maximum freedom of movement at any time

High-quality Velcro closure for adjustable fit covered with TPR, double stitched, prevents dust or sand traps

Thumb, index finger and middle finger are touchscreen compatible thanks to the conductive suede patches

Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...

The MoG Target Combat 9106 is available in three eye-catching colors:

Black

Coyote Brown

Wolf Grey

Unisex model - available in sizes 6 (XS) to 12 (3XL) The glove is certified according to EN 388 and EN 407 standards for mechanical protection and for protection against contact heat respectively.
Select options Details
SnigelDesign 5.56 Elastic pouch 1.0

€32,45
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.

Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.

A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.

The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.

Weight: 50 gr Dimensions: 8x15x2 cm
Select options Details
SnigelDesign SMG Magazine pouch -00/14

€32,00
Weight: 100 g Dimensions: L= 23, W= 9 & D= 4 Fits in: 1 MP5 magazine or telescopic baton Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:
Very fast access to your submachine gun magazine

Stores one magazine or telescopic baton

Store the magazine with the top up, pull it and insert it with one smooth movement- It can't be done faster

Elastic band keeps the content secure when the flap is open

Flap for added security when fast roping or similar

Velcro Vertical/Horizontal attachment system makes it possible to attach the pouch on any equipment vest or belt.

22-00245-01-000, SMG magazine pouch -14is an upgarded version of the -00 pouch which takes less space and is lighter, but otherwise has teh same functions as before.
Select options Details
SnigelDesign Grenade pouch -10

€34,95 – €39,95
A versatile, light and easy to use pouch for different kinds of grenades which is simple, quiet and easy to access. tab to open the lid. You can now easily grab a grenade
Weight: 90 g Dimensions: L= 14, W= 9 & D=7 Volum= 0,6L Fits in: Grenades, smoke grenade, 2x40 mm grenades, field dressing, GPS, compass or other small items Features:

Attaches with the tuck back system to the equipment vest

Pull the large tab to open the flap

The tab is designed to be easy to use with gloves on

The grenade pouch attaches safely on both belt and vest. A grenade sits safely in the pouch with the lid closed

The lid closes securely with two press buttons for double safety. An elastic band keeps the grenade in place while the lid is open

There are three positions for the press buttons to accommodate small or large grenades

The elastic holds any possible movable parts of the grenade in place so that they do not make any noise or rattle
Select options Details
Snigel Medium Schwung bag -1.1

€109,95 – €299,50
We have removed the MOLLE from the front of the bag in this new version. A handy shoulder bag for all those things that end up in your arms when you least wish for it. Easy to carry and keeps everything you wear at your fingertips. A grab bag with six inner compartments for warehouses, radios and all kinds of tactical or outdoor equipment during your hikes. Two compartments are equipped with a zipper to further secure the contents. Opening with zipper to the main compartment and a drawstring closure inside. Removable shoulder strap with buckle. Removable waistband with buckle. Eyelet in the soil to let water through. Also very useful for walks with your dog to bring the necessary things.

Weight: 450 g

Dimensions:30 × 30 × 17 cm

Volume: 10L
Select options Details
SnigelDesign Medic patch w Velcro

€6,95

A symbol to mark your competence as a medic on the bag or pouch Velcro back Is attached to the outside of the bag with Velcro loops 60 mm circle

Select options Details
Fluna Tec Gun Care care set 2

€39,95
With the Fluna Gun Care Set 1, cleaning weapons has never been easier. With three Fluna Tec main products and matching microfiber cloth, you can clean your entire weapon without oil. From now on, you can rely on clean, economical and odorless gun cleaning and maintenance with ceramic coating. Cleaning firearms is usually not the most popular activity, but it is an extremely necessary one to ensure the desired features and smooth operation of firearms. The good news is that the products in Fluna Gun Care Set 1 are enough to completely clean and maintain your technically advanced firearms - without oil! - to clean and maintain them completely. Discover the time-saving and effective Fluna Tec system: clean all parts of the weapon, free the barrel from metal contamination and protect your weapon with the high-quality ceramic coating that professionals rely on. CONTENTS OF FLUNA GUN CARE SET 2

Fluna Gun Coating Aerosol 100 ml

Fluna Gun Degreaser 100 ml

Fluna Gun Cleaner 50 g

Microfibre cloth 40×40 cm

1 / FLUNA GUN COATING AEROSOL Rely on the perfect care of your gun with the high-quality ceramic coating from Fluna Tec in the practical spray bottle. The transparent, residue-free and non-greasy coating can be applied to any surface. It convinces with high temperature resistance, the best corrosion protection and a long-lasting effect. 2 / FLUNA GUN DEGREASER With this special gun cleaner and degreaser in a bottle, you can remove oils, greases, waxes, gunpowder smoke, and other combustion residues. You can use the gun cleaner manually and in an ultrasonic bath. 3 / FLUNA GUN CLEANER Heavy duty barrel cleaning paste in a can is the perfect choice for smooth and serrated barrels of rifles, pistols and revolvers. Quickly and completely removes gunpowder residue, lead, copper and tombac from all types of barrels. 4 / LINT-FREE MICROFIBER CLOTH For a streak-free, thorough and residue-free cleaning of your gun, we recommend the microfiber cloth included in Gun Care Set 2. Wash your used cloth at 60°C in the washing machine without fabric softener. FLUNA TEC GUN CLEANING FOR SPORT AND HUNTING Professional teams have long relied on Fluna Tec's oil-free, economical and highly effective firearms cleaning and maintenance products. Produced to the highest standards and in constant compliance with the requirements of professionals and amateurs, Fluna Tec takes the care of valuable firearms, knives and optics to a new level.
Add to cart Details
Warrior Assault Systems Single Quick Mag

€29,90

The Single Quick Mag is a versatile multifunction loader bag that can hold a variety of 5.56mm warehouses, including P-Mags. The Quick Mag Pouch from Warrior Assault Systems can also contain 7.62 mm x 39 mm AK mags M14 FAL etc. The size can be adjusted by means of a laced elastic cord that is strung through the side of the bag. Comes with optional bungee retention tabs as seen on the Warrior Assault Systems Open Mag bags for operators who need extra security from their warehouses.

Add to cart Details
5.11 TACTICAL ABR PRO PANT Khaki

€78,95
The ABR ™ Pro Pant is a modern version of the proven 5.11 Tactical ® classic, the Tactical Pro Pant. The ABR ™ Pro Pant has a straight fit and consists of the specially developed FlexLite 2-way stretch ripstop material, which is extremely durable and enables extreme mobility in all situations. With 9 pockets and a newly designed back pocket, all the important things of everyday life can be stored away. Material 71% polyester, 29% cotton (FlexLite Ripstop, 5.6 oz, Teflon® coating); YKK® zipper. Details:

Normal fit.

2-way stretch ripstop polycal cotton mix.

Dirt-repellent Teflon® coating.

Comfortable elastic waistband.

Reinforced seating area.

Preformed and reinforced knees.

Inner pockets for knee pads (not included).

Gulp with YKK® zipper and button.

2 deep pockets.

2 back pockets with Velcro.

1 low profile above the left back pocket for eg. AR-15 magazines, smartphones, etc.

2 thigh-high bags with Velcro and expander.

1 small bag with Velcro in front (left).

1 small front pocket (right).

1 colour-resistant tool belt above the right back pocket.

7 belt loops (55 mm).

D-ring on the belt loop in front right.

Weight: approximately 520 g (size 32/32).

Please note: The delivery does not include the belt. The images show only one application example.
Select options Details
5.11 Tactical Rush24 2.0 Backpack 37L

€148,95 – €193,95
The RUSH24 2.0 is designed as a 24-hour insert backpack that provides plenty of space for equipment and accessories while being robust and reliable enough for long day trips or tactical missions. With its 37 litre volume, its more than 20 compartments and the surrounding MOLLE web platform, the RUSH24 offers unsurpassed storage and fastening capabilities. The ergonomically shaped shoulder straps with contour yok system and the padded back section with removable reinforcement provide optimal and comfortable wearing comfort. The RUSH24 is made of extremely robust, wear-resistant and water-repellent 1050D nylon. Material 1050D nylon; YKK® zippers Details:

Ergonomically shaped shoulder straps with fast fastenings.

Height adjustable chest strap.

Reinforced handle.

Padded back section with removable reinforcement.

Drinking system compartment with hose opening.

With fleece padded pocket with zipper for glasses.

Main compartment with 2-zipper, 2 zip-tracked mesh pockets, 1 zippered pocket and 1 padded laptop compartment.

2-piece pocket with front zipper with one zipped mesh compartment each and 1 fleece-lined smartphone compartment.

2-way front zipper pocket with 9 open pockets, 1 zip pocket and key holder.

Hidden CCW pocket between main compartment and front pocket.

2 zippered side pockets.

MOLLE band on the front and sides.

Velcro surface for ID patch.

Capacity: 37 litres.

Dimensions: ong. 50 x 38 x 34 cm.

Main compartment dimensions: approximately 50 x 31.5 x 20 cm.

Size of drinking system compartment: approx. 43 x 31.5 cm.

Front pocket dimensions: approximately 31.5 x 28 x 5 cm.

Weight: about 1770 grams.
Select options Details
AKU selvatica tactical mid GTX tactical boot Black

€184,95
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material

Top material: AIR8000® + welded PU film;

Interior: GORE-TEX® EXTENDED COMFORT;

INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;

Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)

Details:

Light and comfortable.

Waterproof and breathable.

Seamless upper material by PU-treated skeleton.

Lacing system with pull stopper.

Toe and heel cap.

Antimicrobial and breathable OrthoLite® insoles.

Vibram® Selvatica Megagrip outsole for optimal all-round grip.

Pull-on loop.

Height shaft: 13 cm.

Weight: approx. 460 g / shoe (size 42).
Select options Details
Mechanix Wear M-Pact 3

€54,25
The powerful M-Pact® 3 protects soldiers and law enforcement officers with full hand protection in the field. A dense, single-piece thermoplastic rubber knuckle protector is anatomically designed to absorb powerful impact on the back of the hand and improve overall mobility during heavy charging operations. M-Pact 3 tactical gloves feature internal fingertip reinforcement for extreme wear resistance and relief patterns for extra grip where you need it most. Features

Cast thermoplastic rubber (TPR) shock protection meets EN 13594 impact standard.

Closure of thermoplastic rubber (TPR) ensures a firm fit on your wrist.

Accordion filling of EVA reduces the impact on the thumb and fingers.

Internal fingertip reinforcement supports extreme wear resistance.

Durable palm of synthetic leather infused with touchscreen technology.

Nylon carry loops for storage.

You can go in the washing machine.

Intended use

Army

Police

Search and rescue

Maintenance recovery operations
Details
5.11 Tactical TDU Belt

€21,95

The 5.11 Tactical TDU belt is an airport-friendly web strap with our non-metallic, unobtrusive buckle (patent pending). Material Material: 100% nylon

Select options Details
Snigel patch with velcro

€7,45

The new Snigel logo. Velcro on the back. Is attached to the outside of a bag, cover or similar with Velcro patches.

Add to cart Details
Not in stock - on order

Snigel Foldable Drinking Cup -13

€8,45

Durable plastic cup folds open from the folded position to form a 2 dl drinking cup. Guaranteed leak-proof, even with boiling water. The best cup to bring into the field. Always wear it in one of your trouser pockets, so you can easily access it if you want to drink from a stream. Snigel logo printed on the outside. Weight: 25 grams Dimensions: 9 x 7 x 3 cm Category Miscellaneous products Color: Olive

Details
Condor Micro dump pouch

€21,95
The Condor Micro Dump Pouch is a rollable universal pouch for empty mags, shotgun shells or other utensils. Suitable for 8 pieces of 5.56 NATO STANAG mags. Material 100% Polyester. data:

Small to fold.

Large opening with elastic drawstring and pull stoppers for adjusting the width.

Mesh bottom.

2 removable PALS fasteners for the MOLLE system (25 mm).

Dimensions folded: 10 x 10 x 4 cm.

Dimensions open: approx. 27 x 25 cm.

Weight: approx. 140 g.
Select options Details
Not in stock - on order
MIL-TEC Multitarn® tactical sling with bungee (2-point)

€7,95
The Mil-Tec Tactical Carrying Strap Bungee 2-Point Sling is a tactical weapon belt for machine guns and carbines. Length adjustable pendulum with one weapon receiver.

100% nylon

Carabiner made of zinc-iron alloy

Length sling: 67 cm to 112 cm

Length elastic band: 15 cm to 21 cm

functional rifle strap with adjustable carrying strap

2-point carabiner
Details
UphillSport Combat Tactical 3-Layer L2 Duratech sock with Bamboo

€14,90
Uphillsport Combat is perfect for all actions in medium and hot conditions. The 3-layer Duratech structure protects the bamboo and ensures that it is soft and breathable. The multi-layer structure wicks moisture away from the skin and keeps your feet warm and dry. The special combination of multilayer with polypropylene next to the skin, bamboo in the middle to bring heat (grade 2) and the sock is light in thickness. Polyamide on the outside makes the sock extremely durable. Uphillsport's Duratech invention has been adapted as the most widely used sock in the Finnish army. More than a million pairs are used in action. The Duratech sock is designed to be very durable and bamboo absorbs a lot of sweat and keeps the boot dry. This makes Combat the ultimate military sock for any outdoor activity. The foot section of the Combat Sock has a fitted heel and a seamless toe. This improves support in the middle of the foot and adds comfort by keeping the sock wrinkle-free in place. No more blisters with Combat socks. Combat is on crew length, to fit above the walking shoe. This prevents your boot from rubbing over your skin. The Combat sock is available in dark grey, navy blue and black in all sizes. The Combat sock will enhance your outdoor experience because you can really feel your feet in perfect condition. Ball points:

Combat is perfect for all actions in medium and cold conditions. Combat is man-length so they fit above the boot - Available in dark grey, navy blue and black in all sizes

Combat Trekking Socks are made with a 3-layer Duratech structure - Several layers wick away moisture and keep the feet warm - This guarantees great breathability, moisture regulation and durability

Heat grade 2, ideal for medium and warm seasons - in Duratech bamboo is knitted between polypropylene and polyamide for better moisture regulation and durability - Duratech is uphillsport's most durable sock - used in the Finnish army since 2005

Uphillsport's unique multilayer structure makes the sock highly breathable and durable, yet lightweight in thickness. Combat has a sports shaft with Bamboo, and a thin, 3-layer foot section- This sock fits in a closed shoe, or can be used as a lining

The foot section of the Combat sock has a heel and seamless toe - This improves support in the middle of the foot, and adds comfort by holding the sock in place, wrinkle-free.

Features and Benefits:

3-layer structure - keeps feet feeling good and dry

Thin structure - breathable and durable

Elastic sports shaft - stays in place

Specifications

Light thickness

Thermal degree: 2

Crew length

Materials: 60% Bamboo Viscose, 20% Polypropylene, 19% Polyamide, 1% Lycra
Select options Details
First Tactical slash & flash protective knuckle glove

€54,95 – €57,99
The First Tactical™ Slash & Flash Hard Knuckle Glove is a reliable and flame retardant tactical glove with cut protection. The palm of the Slash & Flash Hard Knuckle Glove is made of goatskin and Kevlar® lining. The back of the hand is made of flame retardant Nomex® Jersey. The hard TPR knuckle protection and TouchTac™ touchscreen function make it a functional tactical glove. Material Palm: 100% leather (goatskin); back of the hand: 100% meta-aramid (Nomex®); Lining back of hand: 100% cotton; lining palm: 100% aramid (Kevlar®). Details:

Soft goat leather palm.

Kevlar® lined palm (cut protection level 2).

Back of the hand in flame retardant Nomex® jersey.

Hard TPR knuckle protection.

TouchTac™ touch screen function.

Weight: approx. 94 g/pair (size M).

Size information: The gloves fall one size smaller. CARE INSTRUCTIONS

Machine wash cold

Do not bleach

Drying on a leash

Do not iron

Do not dry clean
Select options Details
Savotta Side pouch 4L

€39,90 – €45,90
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. Examples of use As a fairly small pouch with only four liters of capacity, no big things fit in here, but this also makes them very suitable for use on small backpacks with limited height / width on the sides. Here are some examples of what will fit in such a bag:

A medium-sized tarp and accessories

A lightweight puffy jacket, rain suit or poncho

A regular 1.5 liter bottle, and some other stuff

An isolated food pot of 0.7 liters

A Jetboil burner and a gas cartridge

Key features

Capacity approx. 4 litres

Covered zipper

Vertical front signalling loops for compression straps

Internal D-ring for securing small items

Internal flat rear compartment

Reinforced bottom and sides

PALS-compatible mounting system

Water drainage tulip at the bottom

5-year warranty on material and craftsmanship

Made in Finland/Estonia

Technical specifications

Weight: 200 g

Dimensions: 13 x 30 x 9 cm (W x L x D)

Main material: 500D Cordura (100% polyamide)

Lining: 210D polyamide

Webbing: 100% polyester
Select options Details
Mechanix Wear ColdWork M-Pact

€44,90
When the thermometer drops, the Mechanix ColdWork M-Pact gloves are exactly what you need. Stay ahead of the cold with C40 3M Thinsulate insulation and waterproof SoftShell material that does not allow cold air to pass through. To withstand the toughest working conditions, we have designed an anatomical thermoplastic rubber (TPR) ectoskeleton that meets the ANSI 138 Level 2 guidelines for shock resistance. The synthetic leather palm features touch screen technology and special D30® padding on the palm for comfortable wearing. Details:

Thermal plastic rubber (TPR) closure ensures a secure fit on the wrist.

Full TPR impact protection that meets the ANSI 138 level 2 impact protection standard.

Waterproof SoftShell material on the back of the hand.

Layered membrane provides essential windproofness.

C40 3M Thinsulate retains warm air and helps regulate your body temperature.

Sturdy Armortex® reinforcement for the thumb saddle.

Touchscreen-ready synthetic leather offers the perfect blend of dexterity and durability.

Two-layer inner fingertip strengthens the index finger and thumb for greater durability.

Armortex's® palm reinforcement offers extra durability.

D3O® padded palm absorbs and dissipates high impact energy through the palm.

The removable spring clamp makes it easy to store the gloves.

Performance level according to CE EN 388 Wear resistance: 2 Performance level according to CE EN 388 cutting resistance: 1 Performance level according to CE EN 388 tear resistance: 2 Performance level according to CE EN 388 perforation: 1 Performance level according to CE EN 388 Perforation resistance: X Performance level according to CE EN 511 Convective cold: 1 Performance level according to CE EN 511 Contact cold: 1 Performance level according to CE EN 511 Waterproofing: X Material Palm: synthetic leather (60% nylon, 38% polyurethane, 2% fibres of various or new fabrics (industrial cast iron); hand back: Fleece material (100% polyester), fabric (60% cotton, 40% nylon); thumb: Fleece material (100% polyester), synthetic rubber fabric (87% polyvenyl chloride, 13% polyethylene terephthalate); fingers: Imitation leather (60% nylon; 38% polyurethane, 2% fibres of various or new fabrics (industrial rubber)); lining material: Jersey (100% polyester), Thinsulate C40 (65% olefin, 35% polyester).
Select options Details
Mechanix Wear Coldwork™ FastFit®

€27,90
With the ColdWork™ series, Mechanix offers a range of gloves for cold protection, from lightweight fleece solutions to heavy-duty Primaloft and 3M Thinsulate™ combinations. For working in fresh cold air, Mechanix has developed the ColdWork™ FastFit® glove, which keeps hands comfortably warm with heat-retaining C40 3M Thinsulate™ insulation. A waterproof SoftShell outer layer keeps the back of the hand dry and prevents wind from entering in cold weather. The palm is also equipped with the proven Mechanix leatherette with touchscreen technology. The FastFit® is easy to put on thanks to the elastic cuff. The ColdWork™ FastFit® provides insulation without sacrificing freedom of movement. Details:

The elastic elastic cuffs ensure a good fit.

Waterproof SoftShell material on the back of the hand prevents cold air from entering.

Comfortable fleece insulation keeps the heat in the glove without hindering your mobility.

Sturdy Armortex® reinforcement for the thumb saddle.

Touchscreen-ready synthetic leather offers the perfect blend of dexterity and durability.

Removable spring clamp makes storing gloves easy.

Performance level according to CE EN 388 Wear resistance: 1 CE EN 388 cut resistance performance level: 1 Performance level according to CE EN 388 tear resistance: 2 Performance level according to CE EN 388 perforation: 1 Performance level according to CE EN 388 Perforation resistance: X Performance level according to CE EN 511 Convective cold: 2 Performance level according to CE EN 511 Contact cold: 1 Performance level according to CE EN 511 Waterproofing: X Weight: approx. 90 g/pair (size M). Translated with www.DeepL.com/Translator (free version)
Select options Details
Agilite Tourniquet Holder

€21,90
The Agilite Tourniquet Holder is an elastic TQ holder that attaches to your Plate Carrier, Battle Belt or other equipment via hook and loop. It has inner mil-specification elastic to hold a turnstile tightly while at hand. An additional Cordura outer layer protects it from abrasion and the elements in demanding environments. The TQ holder has a laser cut loop for ID Patches with the IDF "O" symbol for fast turnstile identification. It also has an eyelet to fasten your turnstile so you never lose it. Sizing The Agilite TQ holder can be attached to any surface with loop, including: Plate carriers, combat straps and chest harnesses. Specs

500D Cordura Mil Spec Elastic webbing

Width: 4.9" Height: 4.5"

Weight: 0.6 oz

Attention! Tourniquet for illustration purposes only, not included.
Select options Details
Agilite Warfighter™ Cummerbund

€137,95 – €149,95
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge. *Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter. Specs Compatible with FirstSpear Tubes® and other quick-release fasteners Dimensions: M: 57*14*1cm(22.5*5.5*0.5 inches) L: 25*5.5*0.5 inches (64*14*1cm) XL: 28*5.5*0.5 inch(72*14*1cm) Weight: M: 126gr L: 140gr XL: 152gr Materials:

Laser cut Velcro overlay panels

Laser cut Squadron™ laminate

500D CORDURA® Mil Spec Tactical Nylon

CURV® thermoplastic composite material
Select options Details
Masters of Gloves Glove Holder

€18,95
Designed to integrate seamlessly with webbing/MOLLE systems on plate carriers, bags, belts, and more, the MoG glove holder offers unparalleled versatility. Keep your gloves securely in place with the choice of a reliable hook-and-loop closure or a sturdy key ring. This pouch is not only for gloves, but also a true multi-purpose holder, perfect for organizing and carrying ropes, keys, a flashlight, or other essential accessories. Upgrade your gear with the MoG Glove Holder - your solution for convenience and functionality. Main features :

Durable webbing with adjustable hook-and-loop fasteners for both belt and glove holders, keeping out dirt and sand

Easy-to-open glove holder thanks to the additional pull strip

Universal hook and loop system, perfect for easy attachment to plate carriers, backpacks and all belt systems

Strong and durable steel carabiners - multifunctional system for gloves, keys and other equipment

The MoG Glove Holder is available in two eye-catching colors:

All black

Coyote Brown

Unisize model
Select options Details
Not in stock - on order

SnigelDesign FR Beanie -17

€35,95

A tight-fitting flame retardant hat that can be used under a helmet. Lightweight and thin to be comfortable in most situations, yet warm enough to protect from the cold. Flatlock seams for more firmness. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane

Details
SnigelDesign Rigid trouser belt -05

€26,95
The belt to use for carrying something heavy

Reinforced with a semi rigid plastic sheet

It supports the load, does not twist or sag and remains comfortable

Adjustable from 84cm to 110 cm waist

Swivel buckle and Velcro adjustment

Channel for cable ties

Fits in: All pouches, holsters and drop leg holdersFits on: Most bodies

Weight: 90 g

Dimensions: 84- 110 cm
Select options Details
SnigelDesign Small blank patch-13

€7,95

A gray blank place where text can be written with a marker. 80x25 mm. Hook Velcro at the back so that the patch can be attached to bags and pouches on Velcro surfaces.

Add to cart Details
SnigelDesign Medic patch small -16

€7,25

A grey and black patch with the text MEDIC. 80 x 25 mm. Hook Velcro at the back so that the patch can be attached to bags and pouches on Velcro surfaces.

Add to cart Details
Mechanix Wear The Original Coyote

€27,95
The Original® tactical glove revolutionized the hand protection industry with its versatility and anatomical design. Robust 0.8mm synthetic leather infused with touchscreen technology ensures the perfect blend of agility and durability. Breathing TrekDry® forms to the back of your hands to keep you cool and comfortable in the field. The original offers an unparalleled fit, feel and functionality, so you can focus on what's in the range. Intended use

Army

Police

Shooting sport

Maintenance repair work

Features

Form-fitting TrekDry® helps keep your hands cool and comfortable.

Adjustable wrist fasteners made of thermoplastic rubber (TPR) ensure a safe fit.

Reinforced thumb and index finger improve durability.

Touchscreen-capable synthetic leather offers the perfect blend of agility and durability.

Nylon carry loops for storage.

You can go in the washing machine.
Select options Details
Not in stock - on order

Warrior Assault Systems Single Open Mag Pouch 7.62mm

€22,95

The Warrior single 7.62 mm open shorts is a great universal Open Mag Pouch that can hold a single SCAR H (7.62 mm x 51 mm) Mag. It can also contain a warehouse for an SR25 G3 or M14. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.

Details
5.11 TACTICAL STATION GRIP 2 GLOVE

€34,95
The 5.11 Tactical Station Grip 2 glove offers the highest level of comfort and durability with excellent ergonomics, padding and protection. It convinces with a sporty design and an optimized fit. Material Imitation leather palm 60% nylon and 40% polyurethane Stretch fabric handback 93% nylon and 7% elasthan Palms of 100% nylon Certified according to EN388: 2016-2 1 2 1 X. Details:

Preformed, breathable ankle protection of neoprene.

Palm of synthetic suede with hard-wearing finish.

Breathable 4-way stretch top material.

Velcro closure on the wrist.

Reinforced cuff seam/ pull lip.

TAA compatible.

Weight approx. 100 g / pair (size L).

Size key: S/7; M / 8; L /9; XL / 10; XXL / 11.
Select options Details
5.11 FAST-TAC TDU PANT TDU Green

€52,95 – €58,95
5.11® Tactical Fast-Tac ™ TDU Pant is a rugged tdu style work pants with two large thigh pockets with bellows. It is made of a robust polyester ripstop material that is very light, breathable and flexible. The seams are reinforced with an extra heavy 5-wire construction. The Fast-Tac ™ 100% polyester material is 25% lighter than conventional ripstop fabric and is also very breathable and fast-drying thanks to its fabric. Despite its light weight, the Fast-Tac ™ material is very durable and durable. Material 100% polyester (Fast-Tac ™); YKK® zipper; Prym® push button. Details:

Flexible comfortable waistband.

Fortified seams.

Reinforced knee and inner pocket for neoprene knee pads (optional).

Reinforced seating area.

2 stab bags.

2 thigh bags with Velcro.

2 back pockets with Velcro.

5 belt loops (60 mm).

Cuffs with drawstrings

Weight: approximately 500 g (size 28/34).
Select options Details
Snigel Instructor Patch Small -12

€6,90

A gray and black patch with the text INSTRUCTOR. 100 x 25 mm. Velcro at the back so that the patch can be attached to Velcro surfaces on bags and pouches.

Add to cart Details
Not in stock - on order
Mystery Ranch Hexagon trucker cap

€24,95
Mystery Ranch Hexagon Trucker-style cap with logo patch on the front. The Hexagon Cap combines two typical cap elements: the preformed front cover and the airy mesh panel on the back. The mesh insert guarantees an optimal main climate and ensures that you keep your cool even on warmer days. The snapback cap, which is open at the back, can be adjusted to size with a classic press-stud. Material 100% cotton; Mesh: 100% polyester Details:

Preformed visor.

Mesh insert for optimal ventilation.

Snap button for width adjustment.

Logo patch.

Weight: about 80 grams.
Details
UphillSport Contact Tactical L1 liner sock with Polypropylene

€12,90
Uphillsport Contact sock has a thin lining structure with air ventilation on the upper part of the foot. Spearheads:

Contact is perfect for high performance and active movements in hot conditions. Contact is crew length, to protect the ankle from the boot - Available in black in all sizes

The thin lining structure of Contact with air ventilation on the upper part of the foot - Polypropylene as a material absorbs moisture away from the skin - This guarantees great breathability and moisture regulation

Polypropylene has undergone a special consistent antibacterial treatment - Keeps the feet in better condition

Heat grade 1, ideal for liner or warm seasons - This sock is based on the Finnish military heat condition sock

The foot section of the Contact Sock has a grip on the arch, a fitted heel and seamless toe. This improves support in the middle of the foot, and adds comfort by holding the sock in place, wrinkle-free.

Features and Benefits:

Thin ventilation structure - Keeps feet dry

Antibacterial - prevents odor and odors

Seamless toe and fitted heel - stays in place

Specifications

Light thickness

Thermal degree: 1

Crew length

Materials: 92% Polypropylene, 7% Polyamide, 1% Lycra Uphillsport Contact is designed for the point man. The Contact sock is perfect for high performance and active movements in hot conditions. Uphillsport Contact sock has a thin lining structure with air ventilation on the upper part of the foot. Polypropylene as a material absorbs moisture away from the skin. This guarantees great breathability and moisture regulation. Polypropylene has undergone a special consistent antibacterial treatment. The antibacterial property is permanent, this helps to keep the feet in better condition. The foot section of the Contact Sock has a grip on the arch of the foot, a connecting heel and a seamless toe. This improves support mid-foot and adds comfort by holding the sock in place, wrinkle-free. No more blisters with Contact socks. Contact is crew length, to protect the ankle from the boot. The Contact sock is available in the color black in all sizes. Wash All socks are suitable for a 40 degree machine wash. Drying in the tumble dryer is not recommended. Socks may appear smaller after washing - it is recommended to reshape the socks after washing for a better fit. Many socks have elastic yarns and therefore they can appear smaller than they actually are. The properties of Merino wool become even better after use and washing. UphillSport socks are made to last, good maintenance makes them last even longer. Made in Finland in the Sukkamestarit Oy factory. The production is ISO9001:2015 certified. All yarn materials are OEKOTEX 100 certified.
Select options Details
Snigel Medium Admin Pouch -18

€64,95

A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included.

Select options Details
Not in stock - on order
Woundclot Hemostatic Bandage 10X10 cm

€12,99
The Woundclot dressing, developed by Core Scientific Creations, has a "special molecular structure" that allows it to absorb large amounts of fluid without falling apart. Woundclot bandages have been selected and used by: US Air Force, FBI, NYPD, Polish, Turkish and Italian army, Romanian and Hungarian rescue services. CHARACTERIZE:

Fast and without back pressure

Class IIb

CE marking
Details
Not in stock - on order

Agilite K19 Plate Carrier Back Flap Cummerbund Adapter

€40,95

With the K19 Back Flap Cummerbund adapter you can attach the Warfighter Cummerbund or other cummerbunds with Velcro to the K19 Plate Carrier (versions 2.0 and 3.0). Attaches to the back of the K19 Plate Carrier via MOLLE. *Plate carrier for illustrative purposes only.

Details