- Zipper compartment in the valve.
- Elastic cord on top of the flap.
- Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and attachment for handset/microphone.
- The shoulder pads can be removed.
- A ballistic plate or hydration bladder can be worn in the compartment in the back compartment.
- Run-up / closure in the main compartment keeps snow and dirt out.
- 2 removable MOLLE straps on the back of the backpack, where more bags can be attached.
- Velcro for identification patch.
- Band and elastic band for microphone for the section radio.
- The backpack can be attached to the back/top of our vests and board carriers.
- Roll up the ends of all the straps to keep them tight.
- Size: 30L.
- Dimensions: B = 27, H = 46 & D = 16 cm.
- Weight: 1100 grams
-
Not in stock - on order
A traditional backpack with flap. -
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
Not in stock - on order
The Snigel Snigel 15-20L all pack is a lightweight backpack that can be used in many different ways. In fact, it's a simple package with a semi-covered zippered opening. It has MOLLE/PALS tires at the front. The inside is covered with Velcro, so our pockets can be attached there (pockets not included). Elastic cord compression on the sides Outside Velcro stripes so you can attach your markings. The package can be attached to our large backs, on our ballistic and non-equipment vests. It can also be worn alone. Fits inside: All types of equipment; radio, medical supplies or personal equipment. It may be:- Worn as a shoulder bag.
- Worn as a backpack.
- Wear around your waist.
- Attached to an equipment vest or a plate carrier with I-bars.
- Attached to a large backpack
- Weight: 860 grams
- Volume: 10-20L
- Dimensions: 45 x 30 x 10 cm
- Colors: Gray, Multicam
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Not in stock - on order
Duffel bag and backpack in one. The padded handles work as shoulder straps as well. A very large, zippered opening for easy access and overview of the main compartment. Two side compartments in the ends makes it easy to organize the packing, and are large enough for your helmet. One zippered smaller compartment inside the flap for equipment that you wish to tuck away. One grab handle in each end. Three windows and one large Velcropatch for patches. Loop Velcro fabric on parts of the interior where you can attach our insert pockets to get extra organized. Weight: 1000g Dimensions: H= 32 W=43 & L= 87cm Volume: 120L -
The small bag to store your short rifle or submachine gun. Padded and reinforced to protect the contents. The bag can be carried in the handles, over your shoulder and as a backpack. Two zippers opens the top completely. Inside compartments for magazines and maintenance equipment. Weight: 1,5 kg Dimensions: L= 60 cm, H= 30 cm, W= 7 cm Fitts inside: G36C, MP5, pistol, radio, magasin, batong och a weapon cleaning kit. -
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
Not in stock - on order
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
-
Snigel 6L funny pack -18 This is a versatile bag for many uses, also developed with Tactical Combat Causalty Care (TCCC) in mind.- For the group doctor or the technician who wants to carry the necessary equipment around the waist, on the back or attached to the backpack.
- Outside Velcro so you can attach your markings. MOLLE band.
- One large compartment with 2 removable interior walls.
- A small outer pocket with zipper.
-
A very comfortable, flexible, fast, accessible and safe way to carry a weapon. With a vest strap attached to the vest, the weapon can be attached to the vest. This removes the uncomfortable strain of the neck that is common with regular arms trops. The strap is adjustable at both ends. The system contains two vest straps, which can be attached to each shoulder. The weapon can then be worn hanging in the middle or on one shoulder, right or left. The weapon system offers several ways to carry a weapon. 1. As a standard rifle belt, with the shoulder cushion and the two fastening straps, mounted in the front and rear of the weapon. 2. With a vest strap on the right or left shoulder on the vest. A fastening strap mounted at the back of the weapon and then attached to the vest strap. 3. With vest strap on the right and left shoulder of the vest. Both fastening straps are mounted on the back of the weapon and then fastened in the vest straps. Now the weapon is centered on the chest. 4. Fastening straps mounted in the shoulder cushion and then both fastened in the rear part of the weapon; Now the gun is in a loop around the neck. The weapon can be folded up and the elastic wire can be pulled around the barrel or any other part of the weapon to secure it while skiing or shooting with a section weapon. Be careful when the barrel is hot, it can melt the elastic wire. The system can be fixed in two different ways: A. Silent, in the weapon with the sewn loops. B. Flexible with carbine hooks. -
Not in stock - on order
- A versatile support pillow for snipers.
- You can shoot in all directions.
- Soft in the top and solid in the bottom.
- Friction fabric on the top that keeps the gun in place.
- Tension straps hold the cover in place around poles and on other surfaces.
-
Not in stock - on order
A very light and tight belt with integrated compartments for secretly carrying equipment. Two layers of elastic keep your equipment safe and tight against the body. Stores communications equipment, baton, tear gas spray, pistol magazines, 5.56 magazines, a flashlight and other supplies for surveillance and security operations in 12 compartments. The bottom of each compartment can be opened with Velcro. Detachable plastic gun holster makes it easy to holster your gun. Velcro closed front. Adjustable elastic cord at the back. One size fits all Black only Weight: 400 grams Dimensions: 125 x 12 x 3 cm *No strap capacity included. -
KEY FEATURES- Two full-length zipped side pockets in each side
- Attaches to the 50L Mission backpack 2.0 with zippers
- Can be worn together as a backpack or individually over the back.
- Can be worn individually around the waist.
- 6 webbing loops on the outside.
- 100% Nylon -PU coated
- All fabrics, buckles and belts are IRR compliant.
- The substance is FR.
- 2x11L
- H= 48, W= 21 & D=13 cm