- 100% nylon 900D
- EVA foam
- ABS plastic
- Preformed, flexible cap with integrated grip.
- EVA foam cushion.
- Adjustable, non-slip straps.Weight: approx. 460 g / pair.
-
Not in stock - on order
The 5.11 Tactical EXO. K1 knee pads are specially designed to withstand the greatest pressure on your knees. They have a preformed, flexible cap with a flat, non-slip profile for a stable position while kneeling, even on hard surfaces. Under the hood is an EVA foam pad for optimal shock absorption. A thickly woven elastic band at the top and a band at the bottom of polypropylene ensure a firm fit and adjustable, low-noise bands ensure they don't slip away. Material -
Nitecore NU05 Headlight Mate & Safety Light Stay safe at night with the Nitecore NU05 headlamp mate! This safety and emergency lighting features 2x red and 2x white LEDs, making it a perfect match for cycling, walking, running, pets, kids, backpacking and more. Using the one-button interface, users can choose from five different outputs, including:- Solid white (35 lumens) - Ideal for emergency lighting
- Red - slow flashing (4 lumens) - Ideal for hiking, trails
- Red - fast flashing (4 lumens) - Ideal for running and location alert
- White - slow flashing (35 lumens) - Ideal for location signaling
- LED: four high-quality LEDs (2x white and 2x red)
- Supported battery: Built-in 3.7V - 120mAh Li-ion battery
- Modes: 4 ─ White light, White slow flashing, Red fast flashing, Red slow flashing
- Brightness outputs: Red slow flashing: 4 lumens / 9 hours Red fast flashing: 4 lumens / 9 hours White slow flashing: 35 lumens / 2 hours and 15 minutes White light illumination: 35 lumens / 2 hours and 15 minutes
- IP rating: IP-66 Water resistant
- Impact resistance: 1.5m
- Dimensions:
- Height ─ 29.5 mm (1.16")
- Width ─ 30.3 mm (1.19")
- Length ─ 16.3 mm (0.64")
- Weight: 10.4 g (0.37 oz)
- Uses 4 high quality LEDs
- Double white and red light sources
- Built-in rechargeable Li-ion battery with a maximum runtime of up to 20 hours
- Built-in intelligent Li-ion charging circuit for micro-USB charging
- Easy single-switch operation for one-handed operation
- 4 special modes selectable
- Built-in power indicator to indicate the remaining power level (patent no.: ZL201220057767.4)
- Made of durable and sturdy PC material
- Ultra-lightweight design for extreme portability
- impact resistance of 1.5 meters
-
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details- Fits one 5.56 warehouse
- Makes it possible to easily pull and insert the magazine with one hand
- A patented polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- Built-in MOLLE rear mounting
- Tested in battle in Israel
- Smart retention tab meets military requirements without obstructing the entrance to the pouch
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Velcro MOLLE overlay
- Takes 3 MOLLE slots down and 2 MOLLE slots transversely
- Weight: 0.14lbs (0.06g)
- Suitable for one 5.56x45 AR or M4 rifle magazine
- Takes 3 MOLLE slots down and 2 MOLLE slots transversely
-
Not in stock - on order
Side rail set for accessories (one rail, two screws) for CX4 Storm. -
Basic cleaning kit for rifles. Cal 20 Cleaning The range of Beretta cleaning kits has been revamped to provide the user with a wide range of kits to facilitate the most thorough cleaning at home or in the field. Maintaining and cleaning your gun is important to ensure good performance: this is not only an advantage for getting better results when firing, but also helps to ensure greater safety as the problems caused by the presence of chemical residues in the vessels are avoided if they are not removed in a short time. Beretta also offers a full range of products for cleaning and maintaining your gun. This range includes all the accessories and oils you need to ensure the good performance of your weapon, whether it's a rifle, rifle or pistol. All our cleaning products are made in Italy, developed in close collaboration with our experts so that you always get the most out of your weapon. Packaging content:- 3-piece steel rod with PVC coating and ergonomic non-slip handle
- 1 wool brush in the colours of the iconic Beretta shoulder strap
- 1 spiral steel brush
- 1 nylon brush
- 1 bottle of Genuine CLP Gun Oil.
-
Not in stock - on order
The C-A-T® Holder is specially designed to allow personnel to place their C-A-T® Turnstile on their vest or equipment for quick and easy access. It is made with MOLLE/PALS style connectors. The C-A-T® Holder protects your turnstile from the elements and has an easy-to-open elastic pull tab. NOTE: Suitable for both Gen 6 and Gen 7 C-A-T® turnstiles (not included) Dimensions:- L 6.25 in. x W 1.75 in. x D 1.5 in.
- Max bandwidth for horizontal mounting: 1.5 in.
- Weight: 1.26 oz
- Specially tailored for your C-A-T®, to protect it from exposure to the elements
- PALS/MOLLE-style connectors for versatile attachment to the service vest, equipment or belt (mounted horizontally or vertically) for quick and easy access
- Easy to open elastic pull tab with turnstile ID patch - "TQ"
- NATO stock numbers available for COY and ODG.
-
Not in stock - on order
The Magpul Go Bang Trucker is a structured, trucker-style fit with six panels. It has a mesh back and a mid-crown design, so the edge rests comfortably just above your forehead. It also has our classic Go Bang patch centered on the front. One size fits most with its adjustable snapback design, hat size 7 - 7 3/4. Features- Classic structured trucker-style hat with six panels for comfort and durability.
- Embroidered patch in the front
- Mesh back for better breathability
- Adjustable snapback closure
- Interior custom Magpul branding
- Eyelet openings
- 60% Cotton/40% Polyester
-
The 5.11® Single Pistol Case is a fast, convenient and highly functional handgun storage solution and provides safe and secure transport for your gun and shooting gear. Dimensions- Main compartment - 8.75" H x 11" L x 1.75" D
- Total capacity - 168 cubic inches / 3 liters
- Weight - 0.7
- Fully padded inside
- Heavy-duty elastic warehouse/accessory belts
- Lockable YKK® zippers
- Durable 1050D nylon for all weather conditions
- Reinforced handles
- Wraparound zipper, flat design
- External nameplate
- Imported
-
Weight: 100 g Dimensions: L= 23, W= 9 & D= 4 Fits in: 1 MP5 magazine or telescopic baton Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:Very fast access to your submachine gun magazine-
Stores one magazine or telescopic baton
-
Store the magazine with the top up, pull it and insert it with one smooth movement- It can't be done faster
-
Elastic band keeps the content secure when the flap is open
-
Flap for added security when fast roping or similar
-
Velcro Vertical/Horizontal attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
Specialty 0.5mm Covert
Perfect feeling and high movement have found each other perfectly in combination with a 0.5mm palm protection. These Specialty 0.5mm Coyote shooting gloves are extremely lightweight made to provide a natural feel and lightweight hand protection in an anatomical design. 0.5mm AX-Suede ™ provides the perfect blend of tactile control and protection in the field or at the firing range. Breathable TrekDry® forms to the back of your hands to reduce heat development and the expandable flex joints improve trigger finger mobility for smooth manipulation. Features- Low-profile thermoplastic rubber (TPR) closure ensures a secure fit around the wrist.
- Lightweight TrekDry® forms to the back of the hand to reduce heat accumulation and perspiration.
- Anatomically stitched darts adapt to the natural curvature of the hand for an accurate fit.
- Expandable flexible joints improve trigger finger mobility.
- High finger sensitivity 0.5 mm AX-Suede ™ provides accurate feeling and high finger sensitivity.
- Nylon carry loops.
- You can go in the washing machine.
- Army
- Police
- Shooting sport
-
Specialty Vent Gen II Coyote
Beat the heat wherever your mission takes you. Extremely hot or humid conditions can cause sweaty hands, leading to loss of valuable control in the field. Special Vent Covert shooting gloves provide evaporative cooling when the heat is high with a fully ventilated design. Breathable mesh combined with a perforated 0.6mm palm to let cool air in and circulate through the glove. Specialty Vent shooting gloves with perforated trigger fingers and touchscreen capability, so you're always connected in the field. Features- Low-profile thermoplastic rubber (TPR) closure ensures a secure fit around the wrist.
- Lightweight mesh allows cool air to circulate through the glove.
- Ventilated trigger finger.
- Ventilated finger-fourchettes.
- Microfleece sweat cloth.
- Anatomically stitched darts adapt to the natural curvature of the hand for an accurate fit.
- Expandable flexible joints improve overall mobility of the fingers.
- Ventilated palm of 0.6 mm with high finger sensitivity ensures cooling by evaporation.
- Palm and fingers with touchscreen.
- Nylon carry loops.
- You can go in the washing machine.
- Army
- Police
- Shooting sport
-
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features- Two-point sling for lightweight small arms
- Full webbing construction, low profile and weight
- All metal hardware (steel and aluminium)
- Quick loop adjustment slider for grip on webbing
- Pulling forward lengthens the sling and moves the support hand forward
- Front quick adjustment loop can be adjusted to the desired length
- A continuous piece of 25 mm/1" runs through the entire sling
- The ends of the sling form 25 mm/1" loops for universal attachment
- 5-year material and manufacturing warranty
- Gemaakt in Finland
- Weight: 80 g
- Length: 185 cm (detached to max. length)
- Webbing: 100% polyester
- Slider for quick adjustment: aluminum
- Buckles: steel
-
This is a perfectly hidden holster, adjustable for both gun and gun with a lamp. It's worn in your belt. It can also be used if you normally carry a gun in the equipment vest or on the belt. There are often situations where you have to take them off, where do you put your gun? Our solution is this holster that is small and quite soft. When you need to reduce your profile, or e.g. walk around the camp, but don't wear the standard holster, this holster is a natural way to carry a gun. The holster is semi-soft and can be worn without a gun, without discomfort under the equipment vest or belt. Works for both right- and left-handed shooters. The height of the gun is adjusted with a belt to adjust the length, allowing you to get it exactly the way you want it. Seat belt for thumb unlocking. Sig226, Glock 18/17 or similar pistols with or without flashlight fit in. -
Not in stock - on order
Extreme '' auxiliary kit to stop major bleeding for humans and dogs in case of severe cuts, such as an attack by a wild boar, ideal for all hunting and outdoor activities, fits AddOn/Molle system Drive immediately, but carefully, to the hospital or to the vet. This kit is extremely valuable if you are hunting wild boars, but on every occasion - hunting or trekking - this kit should be mandatory! For your dog or your own safety - buy him! Contents: gauze, plasters, scissors, (wet) wipes, safety pins, First Aid alu blanket, etc Extra content: 1 pair of rubber gloves, 5 vials of disinfectant, 10 large compresses, 2 self-adhesive bandages. -
Warrior's Medium Horizontal MOLLE Pouch is ideal for carrying a variety of accessories or Medic Kit, etc. This bag takes up 5 rows of MOLLE on each compatible chest strap or bag. SIZE High - 5.5 in (14cm) Wide - 8.6in (22cm) Deep - 3in (7.5cm) -
Magazine holder for two AR15 magazines of 30 cartridges. Tuck tab and Velcro lid closure, PALS and strap compatible fastener. KEY FEATURES- Suitable for two AR15 30 rd magazines
- Protective lid with pleated tab and hook-and-loop closure
- Built-in hook-and-loop "silencer" in the lid
- Circumference and retention adjustable via elastic cord
- Reinforced bottom
- Attachment system compatible with PALS and belt
- Water drainage transit at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 100 g
- Dimensions: 8 x 19 x 5 cm (W x L x D)
- Main fabric: 1000D Cordura (100% Polyamide)
- Strap: 100% polyester
- AR15 30 rd PMAG without Ranger Plate, 2 Pack
- AR10 20 rd magazine, 1 pcs
- HK417 20 rd magazine, 1 pcs
- IFAK insert
- Flashbang / smoke grenade
- Radio
