-
Designed for 1 x 0.338 Lapua 8.6 mm x 70 mm mag for the L115A1 / 3 AW and AWM. This Warrior case also comes with black PosiGrip lining. It can also contain 1 x .300 Win Mag (7.62 mm x 67 mm) Mag bag or 1 x standard 7.62 mm x 51 mm. The .338 single mag takes 3 horizontal rows of MOLLE on compatible carrier rigs and bags. -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
The Warrior Assault System Double 9mm Direct Action Mag Pouch can be used with and without a magazine lock, the plastic material on the inside in combination with the elastic band on the side prevents the warehouses from falling out, the warehouse safety can be opened with Velcro and fleece tape.- Dimensions: approx. 10 x 2.5 x 11 cm (LxBxH),
- Weight about 120 grams.
-
Warriors Elite Ops Single 9 mm Direct Action Mag Pouch is compact and allows the cover to roll down and secure with Velcro to allow quick access to chargers. The bag can contain 1 horizontal row of MOLLE on any compatible carrying belt or bag. -
The Warrior Assault System Triple 9mm Direct Action Mag Pouch can be used with or without the magazine protection, the internal plastic material combined with the elastic band on the side prevents the magazines from falling out. The magazine catcher can be opened with Velcro and Velcro. Suitable for calibers 9mm, .40 and .45 double row pistol magazines. Material- 100% polyamide (500D Cordura® Performance)
- US MIL-Spec webbing (with a tear strength of 1200 pounds)
- US MIL-Spec stitching, treated against mold.
- magazine holders with Velcro closure, can be folded forward when not in use.
- Elastic sides.
- PALS mounting loops for MOLLE system (25 mm).
- Water drainage eyes at the bottom.
- Dimensions: approx. 12.5 x 2.5 x 11 cm.
- Weight: approx. 150 g.
-
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
The Warrior Assault System Standard Grab Bag can be used as an E&E bag and has the following details: Main compartment with zipper and 3 dividers and Velcro opening for the cable channel: 1. Shallow compartment with 3 wide rubber belt loops, 2. Wide middle compartment with pocket for mobile phone or radio and loops for rubber straps for pens or glowsticks, 3. Shallow outer compartment with fully fleece-lined walls, including pistol holster with Velcro and single magazine pocket. The main compartment is well protected by a detachable lid with transparent card compartment (27x36 cm), this is secured with a Fastex closure.- The external Molle section is equipped with 3 modular M4 warehouse bags,
- side pocket for mobile phone with Velcro closure
- on the other side is a modular 9mm double magazine bag,
- on the back there is a pocket for the hose with Velcro where the hip belt can be stored,
- adjustable shoulder strap with Velcro and modular pocket for tools or magazines.
-
Warrior's Medium Horizontal MOLLE Pouch is ideal for carrying a variety of accessories or Medic Kit, etc. This bag takes up 5 rows of MOLLE on each compatible chest strap or bag. SIZE High - 5.5 in (14cm) Wide - 8.6in (22cm) Deep - 3in (7.5cm) -
Warrior's Universal Strobe/Compass Pouch holds ACR MS-2000 uses ITW IR Clip for closure with elastic retention for added security. The pouch can contain 2 rows of MOLLE on any compatible carrying belt or bag. -
The Warrior PRR Radio Pouch can hold 2 horizontal rows of MOLLE on any compatible carrying belt or bag. -
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
Not in stock - on order
The RPC is the latest evolution of Warrior Assault Systems carriers. Designed as a lightweight and versatile low-profile wearer that offers enhanced mobility without sacrificing protection. The RPC is designed to make medium and large SAPI and ESAPI stand-alone s and the most common 10" x 12" I.C.W.s available. The bags are supported with 3D mesh for added ballistic performance comfort and body heat removal. The Recon carrier comes standard with ladder-style tummy straps that are attached to the front of the RPC via 2 removable ITW SR clips. This allows for quick access when entering and disembarking the RPC (ITW SR clips have a combined breaking strength of 600 lbs per side). The shoulders of the RPC can be worn in 3 different configurations as a smooth low profile with the addition of Velcro-lined shoulders and wrap around the sleeve for hydration and communication. The RPC comes standard with a removable MOLLE front cover held in place by 2 vertical SQM clips and strong Velcro, allowing the panel to be removed and replaced with a wide range of preconfigured weapon-specific pouch panels and Warrior's new Pathfinder Chest Rig. The RPC can be integrated with Warrior's new rear panel Made of high-quality fabric -
Warriors G36 Mag pouches are specially designed for H&K manufactured 5.56mm warehouses with fastening eyes on each side. Warrior's unique Mag-pouch design ensures a smooth draw without a snag. Covered Velcro flaps provide extra safety and prevent dirt and debris from getting into the loader bag. Each pouch contains a single charger. -
The 5.56mm M4 pouch contains 2 x M4 - SA80 style Mags (including P Mags) H&K 416 Diemaco Sig 516 etc... Has a rear cover that can be secured in open position in preparation for a rapid mag change. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.
