- Redesigned to optimize capacity while maintaining a compact size
- Wider zipper opening for easier access
- Interchangeable strap system
- Can be used as a fanny pack or attached to a plate carrier
- Loop-lined interior for hooked accessories
- Zippered back pocket for valuables
- Volume: 2.5L // 152.5 cu in
- Size: 7"H x 10"W x 2.5"D
- Size: 17.78 cm×25.4 cm×6.35 cm
- Imported
-
The updated Condor Gen III Draw Down Waist Pack features a slimmer design and more storage capacity in a more streamlined profile. Perfect as a standalone fanny pack or seamlessly attached under compatible plate carriers. Thanks to its narrower width, the Draw Down sits perfectly under standard plates without restricting freedom of movement during dynamic situations. This covert support pack offers space for everyday essentials or tactical items. The loop-lined main compartment accommodates leashed accessories such as holsters, mag pouches and admin organizers. With its discreet weapon portability, the updated Draw Down is the perfect partner for your adventures at the shooting range and in the city. -
On the modern battlefield, communication is key, just as important as your firepower or ballistic protection. The Skeletonized Comms Wings Set is a set of two plate carrier side wings that can accommodate most individual radios, including AN/PRC-148 or AN/PRC-152. Each wing is adjustable in height for different radio configurations (with or without battery etc.). More so – the wings also accommodate 2 AR-style magazines. The laser-cut holes on the front have been carefully designed to work with the side buckles of the Front Flap Rig Interface.- RAW MATERIAL: Cordura® 500D and Nylon 210D laminate
- Size: one-size-fits-all
- WEIGHT [LB]: 0.18
- WEIGHT [G]: 80
- DIMENSIONS [IN] : reed 8.85'', height 6.5'' (dimensions single piece)
- DIMENSIONS [CM]: width 22.5cm, height 16.5cm (dimensions per piece)
- SKU: PO-SKCW-CD5
-
Not in stock - on order
Designed for extendable batswoman poles, the Baton Holder Model 35 has three different sizes for 16-inch, 21-inch and 26-inch sticks. Thanks to a hole on the back of the device, the user can put the baton back into the holster, even if it is fully extended. The 35 is also available with a tactical version that can be mounted on two hole attachment points. Features- Designed for extendable baton
- Extended baton can be re-holed
- Fits 26" (66 cm) length batons
- Part of the 6004/6005 tactical system
- No call loop
- stx tactical
- MODEL: 35
- SKU: 1099198
- PART: 35-F26-23
-
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system. -
Not in stock - on order
The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system. -
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With a capacity of six liters, this is a medium-sized bag, not small, not large. Something you would expect with a backpack of 30-80 liters. Here are some examples of what will fit in such a bag:- A large tarp and accessories
- A hammock and duvet
- A lightweight puff jacket and pants or rain gear
- Two regular 1.5 litre drink bottles
- A Trangia 27 Series stove, fuel and some stuff to cook
- A Jetboil stove, a gas cartridge, water and some stuff to cook
- 24 hour rations and snacks
- Capacity approx. 6 litres
- Covered zipper
- Front vertical loops for compression straps
- Internal D-ring for attaching small items
- Internal flat rear compartment
- Reinforced bottom and sides
- PALS-compatible mounting system
- Water drainage opening at the bottom
- 5-year material and manufacturer's warranty
- Made in Finland/Estonia
- Weight: 240 g
- Dimensions: 17 x 35 x 9 cm (W x L x D)
- Main material: 500D Cordura (100% polyamide)
- Lining: 210D polyamide
- Webbing: 100% polyester
-
Not in stock - on order
A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g. -
Not in stock - on order
Designed for extendable batswoman poles, the Baton Holder Model 35 has three different sizes for 16-inch, 21-inch and 26-inch sticks. Thanks to a hole on the back of the device, the user can put the baton back into the holster, even if it is fully extended. The 35 is also available with a tactical version that can be mounted on two hole attachment points. Features- Designed for extendable baton
- Extended baton can be re-holed
- Fits 21" (53 cm) length batons
- Part of the 6004/6005 tactical system
- ELS 34/35 Combo
- stx tactical
- MODEL: 35
- SKU: 1155790
- PART: 35-F21-23-MS36
-
Our Rapid Waist Pack is versatile and fast. This backpack is ideal for grabbing essential and critical equipment when time is of the essence. The backpack can also be attached to our other Rapid Packs and other MOLLE platforms by simply removing the back panel and exposing the SlickStick® system. The main zipper is located on the front and another zipper on the inside provides a mesh pocket. An internal loop panel makes it possible to wear accessories hidden or attach them with Velcro. Imported. Details- Dimensions: 16.5 x 24.7 x 7.6 cm
- 183 cubic inches / 3-liter total capacity
- Detachable fastener belt to wear at the waist or crosswise
- External front pocket with zipper
- Removable back panel reveals 5.11 SlickStick® and MOLLE web gear compatible
- Attachable to Rapid Packs and Rapid Sling Pack or other MOLLE web platforms
- Internal loop panel for CCW carry
- Internal mesh pockets with zipper and elastic bands
- 270° opening with double zippers
- Front panel with web MOLLE and 6x1 name band
-
Soft polymer magazine holder with MOLLE attachment for a 5.56 magazine. Can be attached to a belt or to the MOLLE loops on a patrol vest or combat bag. The holder can be attached both up and down. Compatible with FAMAS, HK416 and AR15 magazines. -
A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES- Internal elastic compartments for lead weights
- Designed for six weight discs of 45 x 60 x 5 mm
- Can also carry weights of other shapes and sizes
- Attaches to helmet rail with screws and loop
- Upper fastening straps for our High cut helmet cover V1
- External elastic loops for cord management etc.
- Also functions as a holder for spectacle straps
- 10 x 12 cm loop on the outside for patches
- All color options offer good NIR performance (read more)
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 60 g
- Fabric: 500D Cordura (100% polyamide)
- Webbing: 100% polyester
- Buckles: steel
-
Not in stock - on order
The Med Pouch Gear Set™ seamlessly connects to 5.11® bags, packs and duffels, providing a fast and efficient first aid solution for any application or environment. Features- Part of Gear Set™ system that can be placed on any Gear Set™ compatible product
- 3-layer fold-out configuration for organization
- Fold-out top flap with elastic and zipped pocket on the back
- Transparent vinyl bag with elastic for two-sided access
- Large clear vinyl main pocket with zipper
- Loop strip for nameband
- Velcro flap and two main opening zippers
- Reflection
- G-hooks, split S/R buckles and hook supports for compatibility with Gear Set™ products
- Included on ALS/BLS duffel
-
With the Agilite Molle Placard you can easily expand your plate carrier with molle rows. The back of the placard consists of velcro and 2 G-hooks. -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey