-
Not in stock - on order
The RPC is the latest evolution of Warrior Assault Systems carriers. Designed as a lightweight and versatile low-profile wearer that offers enhanced mobility without sacrificing protection. The RPC is designed to make medium and large SAPI and ESAPI stand-alone s and the most common 10" x 12" I.C.W.s available. The bags are supported with 3D mesh for added ballistic performance comfort and body heat removal. The Recon carrier comes standard with ladder-style tummy straps that are attached to the front of the RPC via 2 removable ITW SR clips. This allows for quick access when entering and disembarking the RPC (ITW SR clips have a combined breaking strength of 600 lbs per side). The shoulders of the RPC can be worn in 3 different configurations as a smooth low profile with the addition of Velcro-lined shoulders and wrap around the sleeve for hydration and communication. The RPC comes standard with a removable MOLLE front cover held in place by 2 vertical SQM clips and strong Velcro, allowing the panel to be removed and replaced with a wide range of preconfigured weapon-specific pouch panels and Warrior's new Pathfinder Chest Rig. The RPC can be integrated with Warrior's new rear panel Made of high-quality fabric -
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
The Warrior Assault System Personal Medic Rip Off Pouch to store the first aid kit, the pouch can be separated from a platform by means of Velcro and Velcro straps, the platform stays on the vest /chest harness, wide opening 2-way zipper, inside elastic loops to attach the first aid kit. Dimensions: approx. 13.5 x 7.5 x 20 cm (LxWxH), weight approx. 325 g. The WAS equipment bags are equipped with a Molle fastening system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications. The filling material (Medic equipment) is not included. -
Laser-cut elastic turnstile holder from Warrior Assault Systems for storing a C.A.T. turnstile. The Laser Cut Elasticated Tourniquet Holder is primarily intended for C.A.T. Turnstiles developed, but also fits on an S.O.F.T. Tourniquet, which is tight in the holder. The laser-cut material is made of high-quality composite laminate material. All threads are resistant to powdery mildew, UV light, water, heat and cold. All materials used have the lowest infrared values (99.8%) and are manufactured in the US according to US military specifications. material 500D Cordura®-nylon Details:- One-handed operation.
- Elastic bands on the side for compression and a secure grip.
- Closing flap with Velcro and reinforced finger loop.
- Laser-cut PALS mounting loop for MOLLE system (25 mm).
- IRR coating to reduce IR signature.
- Dimensions: approx. 11.5 x 4.5 x 3.8 cm.
- Weight: approx. 30 g.
-
The Warrior Assault System Triple 9mm Direct Action Mag Pouch can be used with or without the magazine protection, the internal plastic material combined with the elastic band on the side prevents the magazines from falling out. The magazine catcher can be opened with Velcro and Velcro. Suitable for calibers 9mm, .40 and .45 double row pistol magazines. Material- 100% polyamide (500D Cordura® Performance)
- US MIL-Spec webbing (with a tear strength of 1200 pounds)
- US MIL-Spec stitching, treated against mold.
- magazine holders with Velcro closure, can be folded forward when not in use.
- Elastic sides.
- PALS mounting loops for MOLLE system (25 mm).
- Water drainage eyes at the bottom.
- Dimensions: approx. 12.5 x 2.5 x 11 cm.
- Weight: approx. 150 g.
-
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
- The Warrior Assault Cargo Pack is a small backpack that can be attached to a ballistic vest or worn with the detachable shoulder straps, emergency shoulder straps,
- integrated 3-litre blowing compartment (bladder not included),
- large main compartment with zipper,
- small patched zip pocket with subdivision,
- Compression straps,
- 4 loops of Molleband each on 2 levels to attach additional bags,
- 2 Velcro closures for the drinks hose.
- Dimensions: approx. 18 x 18 x 38.5 cm (LxBxH),
- Weight: about 730 grams.
- Made from water-repellent 1000D Cordura, all tires according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are produced according to military specifications.
-
Equip yourself with the 2" tactical belt set with its 1.5" self-grasping bottom strap, it allows you to take off your gear and without taking everything off or putting it back on, quickly and easily. It's stiff enough for maximum comfort and stability with plenty of equipment. It has a secure metal quick release and numerous MOLLE loops all around. Features- Combat belt for equipment
- Inner/outer tyre combination
- High density nylon hook and loop bottom strap
- Metal buckle with quick release
- MOLLE buckles for carrying extra equipment
- Belt height: 5 cm
- Lower belt height: 3.8 cm.
- 100% Nylon
- Total weight: 375 g (size XS/S)
- available sizes: XS/S and M/L
- Available colors: Black and coyote
-
The compact and minimalist Vigilant Chest Rig allows the wearer to carry the equipment needed to enter the field. It can be worn directly on the combat suit using the H-bands or directly on the plategilet, it has 2 T-adapters to fit into the MOLLE loops of the waistcoat. It can hold 4 AR long gun magazines (FAMAS, AR15, HK 416, G36, AR10 and AK 47) and 2 PA handgun magazines. It has a multi-pen admin compartment, a combat notebook, and a sturdy phone. There is also a small zippered pocket for a grenade. The abdominal pocket is attached to the chest with a Velcro strap and can be used for abdominal protection or as a MEDIC, EOD or other bag. Two Cyalume glowsticks can be worn on the sides of the box. This compact and versatile Chest Rig is suitable for indoor, outdoor and training missions. It allows you to make the same gesture to grab these immediate tools, regardless of your configuration (in plainclothes or equipped with your plategilet). Features- Compact, minimalistic and very versatile chest gutter
- Compatible with regular (H-bands) or MOLLE-waistcoat (T-adapters)
- Detachable H-shaped adjustable shoulder straps with female clips and equipped with a hook and loop square on the back for the identification of the back.
- Middle part with plate width (SAPI) with 4 male clamps
- The velcro middle section is compatible with sheet holders with a Velcro surface.
- 2 Female clips with T-adapters for the MOLLE loops of a plate holder combat gister
- 4 rear magazine slots with elastic fastening straps
- 2 pockets for PA magazines, knife or lamp with Velcro closure
- 1 carrying case with two-way zipper (suitable for grenades)
- 1 administrative bag with a transparent panel for reading route sketches or vital reminders, inside it has elastics for various pens, knives, combat notebook and phone
- 2 elastic bands on each side of the chest for wearing 2 glowsticks.
- Zipper with pull tabs for gloved hands
- Place 3 patch on the front of the pockets for identification
- Made of nylon with waterproof inside
- Available colors: Black and coyote
-
Lightweight 40-liter carrying case, ideal for business trips or to the gym. The bag can be carried by hand or over the shoulder with the detachable shoulder strap. The bag has a compartment to keep shoes, sneakers, food or dirty laundry separate from the rest of the contents of the bag. Features- Lightweight carrying case
- Main Compartment
- 2 side pockets
- Zippered shoe compartment
- Handles with Velcro fastener
- Removable shoulder strap
- Administrative pocket on the front
- Semi-rigid panel at the bottom of the bag
- Anti-abrasion pads under the bag
- 100% nylon
- Dimensions: 51 x 30 x 25 cm
- Total volume : 40 liters
- Weight : 1 kg
- Color : Coyote (CB) and Black
-
Nylon backpack, internal padding, back reinforcement, aluminum rod. Hidden back pocket. Locking straps on the sides and upper part. Padded shoulder and lower back straps. High capacity bag. Medium capacity bag. Modular system on sides and on front flap. Can be used with drinking system. Lower mounting system for use during airdrop. Reinforced handle. Side pockets and large flap at the front to wear helmet/kit. Size: cm 22 x 30 x h 50 -
Padded gun case. An external large zip pocket. External molle system. Double carrying handles. Two inner pockets. Dimensions: 32x23x7 cm -
Lower strap suitable for police, military or tactical use, in nylon. Inside padded and thermoformed for more ventilation and comfort. Easy attachment with adjustable Velcro loops. -
Protect your mission-critical communication and navigation devices, the DarkVault™ Comms case protects the gear you rely on to accomplish the mission. The DarkVault™ Critical Gear Case is designed to provide a professional level of protection while providing immediate access to navigation and communication tasks. DarkVault Comms provide excellent physical protection, but enable electromagnetic communication (i.e., they are not they are not blocking). Features- Rigid protection for sensitive equipment
- COMMS version (non-blocking, lets waves through)
- Enables quick access to equipment
- Waterproof seal that prevents water, dust and dirt from entering
- MOLLE quick coupler system for external and internal mounting options
- Adjustable friction hinge for navigation and communication tasks
- Belt or lock holes for padlocks and manipulation devices to prevent access to the interior.
- internal parts and to attach the case to the MOLLE
- Internal and external Velcro® panels for identification and organization
- Made of durable premium polymer
- May also include small survival equipment such as matches, hooks and lines etc.
- External dimensions: 18.28 x 13.79 x 4.24 cm
- Internal dimensions: 17.01 x 10.03 x 2.92 cm
- Empty weight: 276 g
- Designed and manufactured in the USA.
