- Cleans without residue and degreases at the same time
- Easy to use, does not affect rubber and plastics
-
SPECIAL DEGREASER & CLEANER Fluna GunDegreaser is a special cleaner and degreaser for removing oils, fats, waxes, but also pillows and other combustion residues. Fluna GunDegreaser can be used manually or in an ultrasonic bath. Attributes
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
AEROSOL FOAM CLEANER Fluna TFT/optics foam cleaner is a special foam for cleaning all kinds of optics, binoculars, rifle scopes, spotting scopes. Fluna TFT/Optical Foam Cleaner also cleans flat screens such as TFT - LCD monitors, laptop screens, televisions, PDAs, navigation devices, glass and mirrors. Fluna TFT/optical foam cleaner can also be used on plastic and rubber surfaces. Fluna TFT/Optical Foam Cleaner removes all household dirt such as dust, nicotine, insects, grease stains, fingerprints, patina from hand sweat and dust. Attributes
- Extremely high stability
- High cleaning power
- Does not penetrate the housing
- Cleans without leaving residue
- Contains no alcohol
- Simple application
-
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes
- Easy to use
- Good degree of blacking
- Fast results
-
Use Fluna Gun Degreaser to clean the vessel from coarse dirt such as powder smoke, etc. Bring Fluna BORE PRO into the vessel, e.g. with a soaked felt pad or with a wet metal brush. Use a brushing stick guide. Make sure that the running steel is completely and evenly moistened. After the exposure time of approx. 15 minutes. moisten a metal brush (copper or brass) again with Fluna BORE PRO and push it in the barrel towards the bulkhead. Pay attention to caliber-precise brushes! With about 10 back and forth movements you brush away the metal deposits. Finally, wipe the barrel several times with clean felt pads or plasters and remove the deposit from the barrel. At the same time, the barrel is preserved by the remaining amount of Fluna BORE PRO, neutralization is not necessary. Alternatively, you can completely wipe the Fluna BORE PRO out of the barrel with Fluna Gun Degreaser and then preserve it as usual with Fluna Gun Coating. Attributes
- Cleans and preserves
- Very effective and fast results
- Harmless to running steel
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
Not in stock - on orderEASY CLEANING SILENCERS AND SUPPRESSORS. As with all parts of a firearm, the silencer also applies: regular cleaning protects against damage and retains the value of the suppressor. After about 50 to a maximum of 200 bullets, you should thoroughly clean and preserve your silencer - ideally with the Fluna Silencer Cleaner Set. The use of a silencer in hunting, as well as in sports, is recommended for several reasons. By dampening the muzzle radius, the hearing of man and dog is protected and the perception of the bullet impact is improved. In addition, the silencer reduces the recoil, which increases the chance of success. The interfering flash in diffuse light is also significantly reduced. By cleaning your silencer, you protect yourself and others and increase your marksmanship. CONTENT WEAPON CARE SET 4
- Fluna SDR concentrate 250 ml (for 2 applications)
- PVC lid for cleaning in solution
- Microfibre cloth 40 x 40 cm
CLEANING AND MAINTENANCE OF WEAPONS WITH FLUNA TEC Fluna Tec's experts are constantly working to make necessary and important weapon care as easy and straightforward as possible, while meeting the highest standards. Professional marksmen, action teams and hunters rely on Fluna Tec products - you too can use the Fluna Tec range to preserve the value of your firearms and knives! -
BEST OPTICS CARE FOR HUNTING AND SPORTS The Fluna optical care set contains three coordinated products for residue-free cleaning, long-lasting protection and effective anti-fog coating. Prepare your high-quality optics optimally for sport and hunting and benefit from crystal-clear visibility in all temperatures and weather conditions. A clear, unobstructed view is an essential prerequisite for achieving the desired results in sports and hunting. Nothing is more annoying than a lens with streaks or fogged up that makes precise aiming practically impossible. With the Fluna optics maintenance set, you can ensure that your optics optimally support your ambitions at all times and under all conceivable external circumstances in just three simple and quick steps. 1 / FLUNA TFT OPTICS CLEANER With this special foam, which comes in a handy spray can, you can clean all types of optics, binoculars, riflescopes and spotting scopes. You can also clean flat screens such as navigation systems or hunting and sports cameras in no time. The alcohol-free optics cleaner does not penetrate the housing and is easy to use with a clean, dry cloth. 2 / FLUNA ISOPROPANOL With this product in the practical pump bottle, you can degrease all glass surfaces that you then want to treat with Fluna Anti-Fog. The anti-fog coating is especially popular in yacht optics, as it is exposed to different temperatures and weather conditions. Simply spray on, leave on for a few minutes and polish with a clean cloth (included in the kit). 3 / FLUNA ANTI-FOG The third product in the Fluna optical care set is an effective and durable solvent-based coating that is suitable for all types of glass - and in particular for hunting optics. With just a few sprays from the bottle onto the optics prepared with Fluna Isopropanol, a short exposure time and then polishing, you can apply an anti-fog coating whose effect lasts from a few days to weeks. 4 / LINT-FREE MICROFIBER CLOTH The microfiber cloth with a size of 40 x 40 centimeters is the best choice for cleaning your optics. Make sure it is always clean and dry during use for optimal results. After use, wash the microfibre cloth in the washing machine at 60 °C without fabric softener. 5 / EYEGLASS CLEANING CLOTH - POLISHING CLOTH To polish the lenses, it is best to use the lens polishing cloth from the Fluna Optik care set. Make sure it's clean and dry when you use it – this is the only way to ensure that the glasses are truly streak-free and one hundred percent clean. You can also use this special lens polishing cloth to polish the anti-fog coating for hunting optics. PISTOL MAINTENANCE WITH THE FLUNA TEC RANGE Cleaning, gun maintenance and the associated optical care should ideally be as simple as possible and require only a minimum of time. With Fluna Tec's cleaning and weapon care products, you choose products that are perfectly matched to each other and easy to use. Do as the pros in sport and hunting do and buy your Fluna optical care kit.
-
Not in stock - on orderTHE FLUNA TEC OPTIC CARE SET For anyone who wants to clean and care optimally for hunting and sports optics. With this set, you get all the products you need for professional cleaning of the optics, including anticondens for all lenses. The set contains the following individual products:
- Fluna TFT / optic cleaner 100ml (RETFT00701)
- Fluna isopropanol 50ml (RIS0050120)
- Fluna Anti Fog 50ml (ABG0050120)
- Microfibre cloth 40 / 40cm
- Glass polish 20/20 each packed
- On the back of the inlet is a detailed product description.
- The product description of the individual products in the set can be found in the relevant item.
- First, remove loose dust from the optics – preferably by "blowing out" with a jet of compressed air.
- Clean the optics with the Fluna TFT/optic foam cleaner. Turn off electrical appliances for cleaning. Apply foam cleaner evenly thin (leave briefly inactive in case of strong pollution). Dry brush with the clean microfibre cloth.
- After cleaning, spray the glass of the optics with the isopropanol alcohol, to defropher the surface. Divide the alcohol with the included glass cloth and wipe away the excess liquid. Let the surface dry for a few seconds.
- Then spray the product Fluna spray against covering evenly thin on the glass surface and let the flow substance in for about 2 minutes. Then take the glass polish cloth and brush the glass surface evenly for as long until there is no more liquid to be seen and the glass surface is evenly covered and streakless. Allow the coating to dry for at least 30 minutes. To you can breathe against the glass. If the coating is applied correctly, the mist should dissolve immediately.