Haven't found what you were looking for ? Mail us !|info@afullmetaljacket.com
  • Not in stock - on order
    With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details
    • This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
    • Consists of 1 central attachment and 2 connecting buckles
    • Can be quickly and easily installed on or removed from any plate carrier
    • Once installed, you can turn AMAP III on and off in seconds
    • Equipped with loop/buckle attachment points to make the wearer Agilite-compatible
    Sizing
    • 1 size
    • Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)
    Dimensions
    • Height: 30cm (11.8")
    • Width: 15cm
    • Depth: 8mm
    Specifications
    • 500 Denier Mil Spec Tactical Nylon
    • Mil Spec Plastic Hardware
    • Fits any plate carrier with 6 horizontal MOLLE loops (or more)
  • VERTICAL POUCH S

    2 l multifunction bag with zipper. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS: External dimensions: Height: 24 cm, width: 14 cm, depth: 6 cm Pocket contents closed: 2 l Material: PUR-coated 1000D Cordura PALS fastening: height 3, width 3, fasteners 2 pieces 30 cm Weight: 120 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia.
  • The All Hazards Prime is meaner than your average bag. Designed with input from MACTAC instructors, the bag's main compartment can contain 2 ammo mules or other equipment, while the front panel unzips 180 degrees for full access to a MOLLE and SlickStick-compatible medical compartment. The bag has an internal laptop case, a special compartment for hydration or armor and a universal storage bag for quickly storing a helmet or jacket. Also with a fleece-lined sunglasses pocket, side-mounted fasteners and a handle at the top. Each compartment is lined with highly visible orange to help in low light. Show up with the All Hazards Prime and watch them spread.
    Dimensions Main compartment - 11.5" x 7.5" x 20.5" Total capacity - capacity of 1,768 cubic inches Weight - 4.5 pounds Suitable for a 15" laptop DETAILS FEATURES Ripe medical bags Padded laptop case Hydration compartment Durable 1050D nylon Interior web platform Exterior web platform with three surfaces Retractable pocket for expandable storage Side-mounted catch lines Reinforced handles Adjustable compression straps Orange striking lining on the front panel Ammo Mule compatible (not included) Personalize your bag with purpose-built pouches Suitable for a 15" laptop 5.11's signature Centerline ™ design Imported
  • Savotta JÄÄKÄRI M

    209,90229,00

    JÄÄKÄRI M

    The medium day backpack of the Jääkäri family, capacity approximately 30 liters. The Jääkäri M is an improved model of the Light Border Patrol backpack, originally designed for the Finnish Border Patrol. The sleek design offers unhindered movement in tight spaces and difficult terrain. The PALS fastener offers many options for fitting extra pockets and equipment on the outside of the backpack. An internal plastic frame blade gives the backpack stiffness, while the compression straps help you tie your load up to a tight package. As part of the Border Guard heritage, the shoulder straps, the lap belt and the back lining are designed to be more comfortable to wear than most backpacks of this size. KEY FEATURES Content 30 l Padded shoulder straps with chest strap Padded hip strap Main compartment with floating lid and side zip Zipper pocket on the inside of the lid Internal hydration compartment Compression straps on the side Internal plastic frame sheet PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag product TECHNICAL SPECIFICATIONS Weight: 1.75 kg Dimensions: 52 x 25 x 17 cm (H x B x D) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Frame plate: HDPE DETAILED DESCRIPTION A collar with drawstring covered with a floating lid closes the main compartment at the top. A full-length side zip provides quick access to smaller items stowed in the main compartment. A zippered pocket on the inside of the lid provides secure storage for your wallet, keys, travel documents and phone. The floating lid and compression straps on the side offer a wide range of adaptability to the backpack's capacity. Fasten it tightly or loosen it, depending on the load carried. The compression straps ensure that additional equipment can be attached to the outside of the backpack if necessary. External side pockets at the bottom can be used to provide tools, tripods etc. Secure to the sides of the backpack. A hydration compartment is attached to the inner back wall. Tube ports on both sides allow you to guide the drinks long from the left or right, while the other port remains free for other uses, such as antennas or cables. With PALS straps on the backpack's lap belt, sides and lid, you can attach extra bags and equipment. This system offers numerous options to customize the package to your specific needs. Not only for pouches, the PALS band can also be used for attaching utility straps, shock cord, carbine hooks etc. Four singelluses at the bottom can be used to attach utility straps. MILITARY GRADE MATERIALS Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defense and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The tires and edge tape we use are, again according to the FDF specifications, strong polyester bands in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as standard, as should be since the same materials are used in official military equipment. SUPPORT SYSTEM The Jääkäri M has an internal frame of plastic plate, giving it the necessary stiffness to stay upright when loaded with clumsy and bulky equipment. Both the shoulder harness and the lap belt are tightly filled with foam with closed cells. The shoulder harness is S-shaped and has a detachable chest strap. The forward-pulling lap belt is also easy to put on under load. The buckle on the side provides quick and easy opening when needed. The lap belt is equipped with an additional cushion for lower back support. CONNECTION OF FINNISH BORDER GUARD In the early 1990s, a compact Savotta walking backpack, simply called the "608", was chosen as the starting point for the design of a new day backpack for the Finnish Border Guard. This then changed to the 'Kevyt Rajapartio' or Lightweight Border Patrol backpack, a very modern backpack for its time: narrow design for mobility, side zipper, compression belts and rifle fastening. Most striking was a very sturdy carrying system and an aluminum reinforced frame - something you rarely see on packaging of its size. This venerable design was chosen in 2013 as the basis for the development of what would become the Jääkäri M, the first in the modern range of Savotta packs with a construction and functionality of military quality. This worked out very well and the Jääkäri M was followed by his siblings: the Jääkäri S, L and XL.
  • KEY FEATURES
    • Two full-length zipped side pockets in each side
    • Attaches to the 50L Mission backpack 2.0 with zippers
    • Can be worn together as a backpack or individually over the back.
    • Can be worn individually around the waist.
    • 6 webbing loops on the outside.
    VERSIONS 29-02140B09-000 - Grey Material
    • 100% Nylon -PU coated
    • All fabrics, buckles and belts are IRR compliant.
    • The substance is FR.
    Dimensions
    • 2x11L
    • H= 48, W= 21 & D=13 cm
    WEIGHT 0,45 kg / piece
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • 5.11 RUSH 12 2.0 Backpack

    124,95158,95

    Designed as a 12-hour insert backpack, the RUSH12 2.0 offers ample space for equipment and accessories while being robust and reliable enough for long day trips or tactical missions. With its 24 liter volume, its many compartments and the surrounding MOLLE web platform, the RUSH12 offers unparalleled storage and mounting options. The ergonomically shaped shoulder straps with contour yok system and the padded back section with removable reinforcement provide optimal and comfortable wearing comfort. The RUSH12 is made of extremely robust, wear-resistant and water-repellent 1050D nylon.

    Details:
    • Ergonomically shaped shoulder straps with fast fastenings.
    • Height adjustable chest strap.
    • Reinforced handle.
    • Padded back section with removable reinforcement.
    • Drinking system compartment with opening for a hose.
    • With fleece padded pocket with zipper for glasses.
    • Main compartment with 2-way zipper, 2 zip pockets and 1 padded laptop compartment.
    • 2-way zipper pocket at the front with 8 open compartments, 1 zipper pocket and key holder.
    • Hidden CCW bag between the main compartment and the front pocket.
    • MOLLE band on the front and sides.
    • Compression straps.
    • Velcro surface for ID patch.
    • Capacity: 24 liters.
    • Main compartment dimensions: approx. 46 x 28 x 16.5 cm.
    • Size drinking system compartment: approx. 42 x 25.5 cm.
    • Dimensions front compartment: approx. 30.5 x 23 x 4.5 cm.
    • Weight: about 1380 grams.
  • HORIZONTAL POUCH S

    The Savotta Horizontal Pocket S is a simple and practical pocket with a capacity of one litre. The bag is sealed with a two-way spray water-resistant reverse zipper with tractors at each end to facilitate the use of the bag. The pocket is durable thanks to the durable PUR-coated 1000d Cordura material and the bottom of the pocket is equipped with a metal drain ring. The interior of the horizontal pocket is undivided, which means that larger devices fit in easily and is easily accessible from outside the backpack. The horizontal compartment in S-size can be used as an extra compartment for small Jääkäri products, but thanks to its compact size can also be attached to the back of a backpack. The smallest horizontal compartment is an ideal choice if you need a simple and compact compartment for supplies. TECHNICAL SPECIFICATIONS: External dimensions: Height: 11 cm, width: 20 cm, depth: 5 cm Bag content closed: 1 l Material: PUR-coated 1000D Cordura PALS attachment: height 2, width 4, fastenings 2 pieces 24 cm Weight: 100 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia.
  • Savotta Side pouch 12L

    54,9064,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:
    • A tarp, hammock, duvet and accessories.
    • A lightweight puff coat, pants and rainwear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook.
    • A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.
    • A few days of rations and snacks
    • A week of spare underwear, intermediate layers and socks.
    • All kinds of big special stuff that you need to take with you.
    Key features
    • Capacity approx. 12 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 320 g
    • Dimensions: 21 x 45 x 12 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Made of 500 Denier Mil-Spec Cordura and the same closed-cell impact protection and comfort foam that we use in our heaviest tactical equipment, the case protects your laptop and smart devices from bumps, bumps or accidental falls. Also on the modern battlefield, more and more smart devices are being used and the closed-cell impact foam of the cover keeps them safe and protected in unforgivable military environments. The exterior has a loop for attaching extra pockets, patches and more. Hooks allow you to attach the laptop sleeve to the inside of your AMAP III or other Velcro-lined backpack, but you can also rotate it 360 degrees to hold it securely when carrying your laptop outside your backpack. Details
    • Laptop Sleeve provides protection against bumps and scratches for computers and other smart devices
    • Can be used in the Agilite AMAP III or a loop-lined or other backpack
    • Laptop sleeve has loops on the outside for attaching extra loop bags or patches
    • Sleeve has hook-support mounting wings to attach and stabilize it in your AMAP III or other loop-lined pack.
    • When the laptop is removed from the AMAP3 or another bag, the mounting wings fold over so that the laptop is firmly in the hand during transport.
    Specifications
    • 500/1000 Denier CORDURA® Mil Spec Tactical Nylon
    • Laser cut fabrics & loop
    • Mil Spec Polymer & Metal Hardware
    • Agilite polymer grip-puller
    • Suitable for laptops up to 14.5
  • Not in stock - on order
    One of our most versatile items, the 5.11® Large Kit Tool Bag offers robust and customizable storage for a wide range of applications. Whether you're looking for a way to keep your keys and screwdrivers organized, store your toiletries when you travel, or store a first aid kit in your car's trunk, the Large Kit Bag has everything you need. A fold-out three-stage organizer panel provides zippered mesh pockets to keep your essentials in sight, a spacious main compartment is reinforced to store heavier items, and two secondary storage compartments provide ample space for accessories. Made of highly durable, weatherproof 1050D nylon, the Large Kit Bag keeps your gear safe and protected in any climate or environment. Dimensions
    • Overall dimensions: 33 x 25 x 20 cm
    • Main compartment - 8" H x 13" L x 6" D
    • Front and rear pockets - 7.25" x 11.5" x 2"
    • Fold-out mesh pocket - 6" x 10.5"
    • Total capacity - 958 cubic inches / 16 liters
    • Weight - 1.8 lbs
    • Three-stage fold-out mesh organizer panel
    • Reinforced main compartment
    • Two secondary storage compartments
    • Durable all-weather 1050D nylon
    • Heavy duty handles
    • Non-slip padded shoulder strap
    • High impact D-rings
    • YKK® zipper hardware everywhere
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Not in stock - on order
    The Fanny Pack Conversion Strap connects to the Agilite Six Pack™ in seconds and turns it into a tactical fanny pack for everyday use. *Fanny Pack not included, images only as an example.
  • Savotta Side pouch 4L

    44,9548,95
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. Examples of use As a fairly small pouch with only four liters of capacity, no big things fit in here, but this also makes them very suitable for use on small backpacks with limited height / width on the sides. Here are some examples of what will fit in such a bag:
    • A medium-sized tarp and accessories
    • A lightweight puffy jacket, rain suit or poncho
    • A regular 1.5 liter bottle, and some other stuff
    • An isolated food pot of 0.7 liters
    • A Jetboil burner and a gas cartridge
    Key features
    • Capacity approx. 4 litres
    • Covered zipper
    • Vertical front signalling loops for compression straps
    • Internal D-ring for securing small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage tulip at the bottom
    • 5-year warranty on material and craftsmanship
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 200 g
    • Dimensions: 13 x 30 x 9 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • The RUSH24 2.0 is designed as a 24-hour insert backpack that provides plenty of space for equipment and accessories while being robust and reliable enough for long day trips or tactical missions. With its 37 litre volume, its more than 20 compartments and the surrounding MOLLE web platform, the RUSH24 offers unsurpassed storage and fastening capabilities. The ergonomically shaped shoulder straps with contour yok system and the padded back section with removable reinforcement provide optimal and comfortable wearing comfort. The RUSH24 is made of extremely robust, wear-resistant and water-repellent 1050D nylon. Material 1050D nylon; YKK® zippers Details:
    • Ergonomically shaped shoulder straps with fast fastenings.
    • Height adjustable chest strap.
    • Reinforced handle.
    • Padded back section with removable reinforcement.
    • Drinking system compartment with hose opening.
    • With fleece padded pocket with zipper for glasses.
    • Main compartment with 2-zipper, 2 zip-tracked mesh pockets, 1 zippered pocket and 1 padded laptop compartment.
    • 2-piece pocket with front zipper with one zipped mesh compartment each and 1 fleece-lined smartphone compartment.
    • 2-way front zipper pocket with 9 open pockets, 1 zip pocket and key holder.
    • Hidden CCW pocket between main compartment and front pocket.
    • 2 zippered side pockets.
    • MOLLE band on the front and sides.
    • Velcro surface for ID patch.
    • Capacity: 37 litres.
    • Dimensions: ong. 50 x 38 x 34 cm.
    • Main compartment dimensions: approximately 50 x 31.5 x 20 cm.
    • Size of drinking system compartment: approx. 43 x 31.5 cm.
    • Front pocket dimensions: approximately 31.5 x 28 x 5 cm.
    • Weight: about 1770 grams.
Go to Top