• Not in stock - on order
    The Mil-Tec Plate Carrier Vest Gen. II is a ballistic protection plate insert with modular webbing on the front, back and side of the vest. With this plate carrier, the abdominal band can be omitted, resulting in a light and flexible plate carrier that is closed by a belt with a Fastex buckle. Material 100% polyester (Oxford) polyvinyl chloride coated shoulder straps: 100% thermoplastic elastomers Details:
    • Molle loop system on the front and back, as well as on the side straps
    • 3 rubber loops on the front for attaching equipment
    • Small pocket with Velcro at the front
    • 3 Velcro strips on the front for attaching patches
    • Full front opening of the vest with 3 large, strong Velcro closures
    • Shoulder straps can be opened with Velcro
    • The vest can be quickly put on and off thanks to the elastic band system on the back
    • Front and rear plate ceramics level III and IV can be used
    • Internal belt holder for ceramic plates 25 x 30 cm.
    • Weight: about 930 grams
    One size fits all.
  • Not in stock - on order
    Waterproof boonie with wide edge made of 100% nylon and a breathable polyurethane membrane that offers you protection from rain and sun. Material 3-layer laminate: 1st layer: 100% nylon; 2nd layer: breathable polyurethane membrane; 3rd layer: 100% polyester tape: 100% polyester; Cord: 65% polyester, 35% cotton. Contains non-textile parts of animal origin. Details:
    • Water-repellent, breathable
    • Size adjustable with cord stopper.
    • Ventilation holes on the sides.
    • Molle / camouflage loops around the Boonie.
    • Weight: approx. 100 g (size M).
  • Pentagon Tactical Baseball Cap with velcro patches for friend-enemy identification on front, back and on cap. Six panel cap designed for tactical use. The fixed flap provides good sun protection and the size of the cap can be adjusted with a Velcro on the back. Details:
    • 6 panels construction.
    • Embroidered ventilation holes.
    • Preformed peak.
    • Size adjustable with Velcro.
    • Velcro surfaces for ID patches on the front, back and crown.
    • Weight: about 85g
  • The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey
  • Not in stock - on order
    A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g.
  • A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.
    • Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
    • A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
    • The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
    Weight: 50 gr Dimensions: 8x15x2 cm
  • Not in stock - on order
    For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g
  • SnigelDesign Grenade pouch -10

    34,9539,95
    A versatile, light and easy to use pouch for different kinds of grenades which is simple, quiet and easy to access. tab to open the lid. You can now easily grab a grenade
    Weight: 90 g Dimensions: L= 14, W= 9 & D=7 Volum= 0,6L Fits in: Grenades, smoke grenade, 2x40 mm grenades, field dressing, GPS, compass or other small items Features:
    • Attaches with the tuck back system to the equipment vest
    • Pull the large tab to open the flap
    • The tab is designed to be easy to use with gloves on
    • The grenade pouch attaches safely on both belt and vest. A grenade sits safely in the pouch with the lid closed
    • The lid closes securely with two press buttons for double safety. An elastic band keeps the grenade in place while the lid is open
    • There are three positions for the press buttons to accommodate small or large grenades
    • The elastic holds any possible movable parts of the grenade in place so that they do not make any noise or rattle
  • SnigelDesign MOLLE sling -14

    59,9563,95
    A 50 mm wide belt that can be used in many ways. To wear any pouch around your shoulders or waist. Like a hip belt on backpacks. As a light combat belt. A 40 mm garter oiler. 50 mm band and 25 mm tyres with 40 mm wide MOLLE openings, vertically on one side of the 50 mm band and horizontal on the other. A double adjustable buckle on the side closes the sling.
  • The Swiss Eye Lancer clear is a lovely seated pair of glasses suitable for activities such as airsoft. It protects the eyes has polycarbanate lenses with an anti-fog and anti-scratch coating and give 100% protection against UVA, UVB and UVC up to 400 nanometers. The glasses come in a microfibre bag. Optimal wearing comfort with ear protection due to the flat legs, equipped with rubber. Specifications of the Swiss Eye Lancer clear: * Adjustable legs * Anti-fog / anti-scratch coating * 100% UVA, UVB and UVC protection up to 400 nm (nanometer) * Microfibre carrier bag * EN 1836:2005 + A1:2007 * STANAG 4296
  • Not in stock - on order
    The P-40 Classic Gen.2 is designed from the ground up for superior comfort without compromise – even without compromising on its functionality or durability. These newly designed pants have a unique cut that allows for amazing freedom of movement. The cut also ensures that the knee pads stay in place (no more stopping, no more pulling). These tactical pants with many pockets are designed for the toughest operations. Large Schoeller® dynamic stretch panels in the seat and a special anatomical fit go hand in hand here, so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop fabric and ventilation zippers at the knees will keep you comfortable all day or night. The P-40 Classic Gen.2 is cut so that the knee protection accessory stays in place and is barely noticeable. Instead, you'll notice how well the knee pads work – they're always there when you kneel and they're always ready to give you the right amount of protection. And best of all, no straps or strings are needed to hold them in place. It is fully compatible with the UF PRO 3D Tactical knee pads, sold separately. These pads are available in two versions: CUSHION for extra cushioning during prolonged kneeling and IMPACT for protection against sudden, hard shocks. The P-40 Classic Gen.2 Tactical Pants has seven spacious, feature-rich pockets that you can store an incredible amount of personal equipment and compact tools. The large side pockets contain inner compartments made of schoeller-dynamic® fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that stuff in them doesn't shift when you're on the go, which means the pants perform better and you can do your job more comfortably, so you don't have to worry about important stuff falling out). The P-40 Classic is made of highly breathable PolyCo ripstop material. Sweat or light rain dries very quickly in this fabric. At sub-zero temperatures, the P-40 Classic can easily be converted into thermal pants. They are compatible with the windproof UF PRO WINDSTOPPER® liner. Details:
    • Breathable, lightweight PolyCotton Ripstop material.
    • High waistband with non-slip silicone insert.
    • Stretch inserts in the waistband.
    • Schoeller® dynamic stretch material in the seat.
    • Pull-fly trouser top with double zipper, snap button and clamping hooks.
    • 2 stab bags.
    • 1 safety pocket with zipper in the left side pocket.
    • 2 hip pockets with flap and Velcro closure.
    • 2 thigh pockets with large storage space, special elastic inner pockets and access via Velcro flap and side zipper.
    • Knee pockets accessible from the outside for easy insertion of 3D Tactical knee pads (sold separately).
    • Ventilation zippers at the knees.
    • 5 double belt loops.
    • D-ring on the front belt loop.
    • Adjustable hem with shoe hooks.
    • Inner zipper for removable WINDSTOPPER® lining (sold separately).
    • Weight: approx. 418 g (size 32/34).
    Made in Europe.
Go to Top