- Includes Rear pod + extended bungee cord
- The rear pocket integrates seamlessly with the Mohawk, Mohawk Air and Gen4 Lo-Pro helmet covers.
- Provides mission-specific customizability.
- Securely attached to the helmet with Velcro, Velcro under tabs and milspec bungee cord.
- Provides new advanced functionality and universal accessory management.
- Uses a new versatile rear flex cell that fits all common NVG battery packs and counterweights.
- Has strategically placed outputs for all cables.
- The semi-rigid exterior of the cell provides the rear accessories with additional protection against impact and has a central loop for ID patches.
-
The semi-rigid exterior of the pouch provides additional impact protection for rear accessories and has a central loop for ID patches. It also has a lower storage compartment for PTT cables when not in use. It's securely and securely connected and yet can be put on and off in about 60 seconds, so you can connect or unplug depending on your mission set. -
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:- Mil Spec 1000d tactical nylon
- Includes Agilite polymer handle
- Made in Israel
-
Expand your tactical gear set with the Agilite Scorpion Patch. Agilite Scorpion patches are available in Ranger Green and Wolf Grey. -
The Agilite Team Wendy Helmet Cover protects the ballistics and lacquered surface of your Team Wendy Exfil helmet, extends its life and gives you full accessory management. It fits the Exfil shell like a glove and is suitable for all rail types (both rail 2.0 and Rail 3.0). Two foldable tabs on the side fold in for the Rail 2.0 and out for the Rail 3.0, so that both fit perfectly. Unique features of the cover include the left and right cable management channels, smooth, snag-free sides and an upper bungee accessory management area for IR flashes, cameras and more that features mil-spec polymer holders with laser-engraved Agilite scorpions. The Agilite Team Wendy Exfil Ballistic cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry Compliant version is also available for bulk orders on demand - For details, email us. Details Fits all Team Wendy Exfil Ballistic helmets, including:- Team Wendy Exfil Ballistic with Rails 2.0 or 3.0.
- Team Wendy Exfil Ballistic SL with Rails 2.0 or 3.0.
- Next generation lower profile central bungee retention for IR flashes, cameras etc.
- Integrated cable management channels
- Full spectrum, rock-solid accessory platform
- Easy installation - can be mounted on the helmet in seconds
- Weight: 5oz (143g)
- 1000D Tactical Nylon
- Flat Polyester Mesh 380g/m2
- Laser-engraved polymer bungee channels
- Rear loops for AA and CR123 NVG batteries
- Made in Israel
-
The Agilite Team Wendy Helmet BUMP Cover protects the integrity and painted surface of your Team Wendy BUMP helmet, extends its life and gives you full accessory management. It fits like a glove on the Exfil shell and is suitable for both the Exfil Carbon and the Exfil LTP helmets, so you have a perfect fit for both. Unique features of the cover include the left and right cable routing channels, smooth, zipper-free sides and an upper bungee accessory management area for IR flashes, cameras, etc.dat features mil-spec polymer holders with laser-engraved Agilite scorpions. The mesh portion of the cover is strategically placed to allow free airflow into the helmet's ventilation holes and keep you cool within range. The cover also has an exit at the back, so the Team Wendy Exfil rear 'V' shaped shock cord can be removed and used even when the cover is on. The cover also extends over and protects the front lip of the helmet, which is a vulnerable spot and usually the first spot where the paint peels off. The Agilite Team Wendy Exfil BUMP cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry-compliant version is also available for bulk orders on request. Sizing - Team Wendy EXFIL Bump LTP/Carbon helmet cover available in 2 sizes: M/L and L/XL - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet ((Rails 2.0 & 3.0) Specs Weight: 5oz (143g) - 1000D tactical nylon - Flat Polyester Mesh 380g/m2 - Laser engraved polymer bungee channels - Back loops for AA and CR123 NVG batteries - Made in Israel Details - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet (Rails 2.0 & 3.0) - Agilite precise fit - Next generation lower profile central bungee retention for IR flashes, cameras etc. - Integrated cable management channels - Full spectrum, rock-solid accessory platform - Easy installation - can be mounted on the helmet in seconds ATTENTION: Rear pouch not included. You can order it separately here. -
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge.
*Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter.
Specs
Compatible with FirstSpear Tubes® and other quick-release fasteners
Dimensions:
M: 57*14*1cm(22.5*5.5*0.5 inches)
L: 25*5.5*0.5 inches (64*14*1cm)
XL: 28*5.5*0.5 inch(72*14*1cm)
Weight:
M: 126gr
L: 140gr
XL: 152gr
Materials:
- Laser cut Velcro overlay panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
- CURV® thermoplastic composite material
-
Originally developed for the US. Navy Seals and Green Beret Special Forces, redesigned and with full rubber protection for the toes, the AKU NS 564 Spider II is a versatile, highly breathable boot used by special forces. The specially developed Vibram® compound provides optimal grip on wet surfaces and in situations that require extreme grip and total control. With a high level of support, stability and good cushioning, it is perfect for carrying heavy loads and other sweaty tasks. The supermaterial of the AKU NS 564 Spider II consists of highly breathable AIR 8000® material, which provides optimal comfort at high temperatures and also allows water from inside to outside when water has entered the boot. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The flat sole and special profile to the tip are ideal for climbing and overcoming climbing obstacles. The extremely robust all-round debris protection and nose provide extra protection on rocky and stony terrain. All this makes the AKU NS 564 Spider II an ideal combat boot for military and police use. Material Top material: leather (1.8 mm) with nylon inserts (AIR 8000®), lining: 100% polyester; Insole: 4-2 mm nylon + EVA; Sole: rubber, polyurethane (Vibram® Spider) Details:- Suede leather and high-quality AIR 8000® outdoor material.
- Very breathable and fast-drying.
- All-round debris protection edge with toe-protecting.
- Padded shaft and tongue.
- IMS cushioning for maximum comfort.
- Nylon insole with a thickness of 4-2 mm and EVA (soft).
- Non-slip Vibram® Spider sole provides excellent grip on all surfaces.
- Flat sole and special profile at the tip offer optimal climbing characteristics.
- Shaft height: approximately 16 cm.
- Weight: approx. 1150 g / pair (size 43). Made in the EU.
-
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Height shaft: 13 cm.
- Weight: approx. 460 g / shoe (size 42).
-
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Height shaft: 13 cm.
- Weight: approx. 460 g / shoe (size 42).
-
Sale!
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Height shaft: 13 cm.
- Weight: approx. 460 g / shoe (size 42).
-
Not in stock - on order
ShockGUARD® shock-absorbing inserts combined with D3O® material. If you need knee protection in a uniform, choose the full-size Alta ShockGUARD® insert made of D3O® material. This insert fits the most common uniform pants and gives you the excellent impact resistance of D3O® in a convenient, portable and lightweight insert. If you fall, the energy is spread over the entire surface, minimizing the chance of injury. These protectors fit anatomically and slide into the compartments of the intervention pants. CHARACTERIZE:- D30® impact technology with "smart molecules" for powerful shock absorption.
- Strong, durable and flexible knee pad insert design.
- Comfortable design that stays in place and fits in most pants.
- Material: elastomer polymer
- Dimensions: 14 x 23 x 6 cm
- Weight: approx. 130 g/piece
-
Phosphorescent PVC patch with Arktis logo and GhostFace from the movie Scream. At night, all cats are grey, or almost. "Darkness descends on the land, with All Hallows' Eve fast approaching. But you don't have to be afraid of ghosts and spirits, the real monsters have always been there. While unholy creatures can be terrifying, it's the Operators who really stand out in the night." CHARACTERIZE: Phosphorescent PVC patch Dimensions: 45 x 60 mm -
Not in stock - on order
ASG Dan Wesson Soft Bag Grey A stylish bag for the Dan Wesson series! Details:- Made of 600D nylon
- Fits all Dan Wesson replicas, even with optics!
- Separate compartment for the replica, with Velcro closure
- 3 mesh bags for exra ammunition or CO2 cartridges
- Elastic loops for 6 speedloaders
- Foam padding protects the replica
- Nice license on the front
- Ultimate carrying bag for the Dan Wesson owners!
-
Not in stock - on order
A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. Dark lens for bright environments. They are CE certified, your guarantee for safe, reliable protection. functions:- Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
- The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
- Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
- High-quality optics offer extreme clarity and no distortion.
- Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
- The top of the frame is ventilated so that air can circulate and fog up is prevented.
- Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
- Provides protection against excessive glare.
- Provides 99% protection against harmful UVA and UV-B rays.
- Ansi Z87.1-2003 exceeds high impact requirements.
- CAN/CSA Z94.3-07.
- CE EN166 certified.
-
Not in stock - on order
A well-constructed enveloping design that provides comfortable protection with full peripheral vision. Tight-fitting sleeping arms with strong hinges, hold them well on your head during vigorous activities. Bright lens. They are CE certified, your guarantee for safe, reliable protection. functions:- Straight sleep and integrated nosepiece fit all face sizes.
- General purposes for indoor applications that require impact protection.
- Provides protection against excessive glare
- Provides 99% protection against harmful UVA and UV-B rays.
- Scratch-resistant lenses made of 100% polycarbonate
- Exceeds ANSI Z87.1-2003 high impact requirements
- CE EN166 certified
-
A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. Bright lens for general applications that require protection against impacts. They are CE certified, your guarantee for safe, reliable protection. functions:- Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
- The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
- Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
- High-quality optics offer extreme clarity and no distortion.
- Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
- The top of the frame is ventilated so that air can circulate and fog up is prevented.
- Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
- Provides protection against excessive glare.
- Provides 99% protection against harmful UVA and UV-B rays.
- Ansi Z87.1-2003 exceeds high impact requirements.
- CAN/CSA Z94.3-07.
- CE EN166 certified.
-
Not in stock - on order
A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. Bright lens for general applications that require protection against impacts. They are CE certified, your guarantee for safe, reliable protection. functions:- Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
- The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
- Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
- High-quality optics offer extreme clarity and no distortion.
- Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
- The top of the frame is ventilated so that air can circulate and fog up is prevented.
- Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
- Provides protection against excessive glare.
- Provides 99% protection against harmful UVA and UV-B rays.
- Ansi Z87.1-2003 exceeds high impact requirements.
- CAN/CSA Z94.3-07.
- CE EN166 certified.
-
Not in stock - on order
A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. The yellow lens increases the contrast, and shows you the target clearly. They are CE certified, your guarantee for safe, reliable protection. functions:- Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
- The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
- Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
- High-quality optics offer extreme clarity and no distortion.
- Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
- The top of the frame is ventilated so that air can circulate and fog up is prevented.
- Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
- Provides protection against excessive glare.
- Provides 99% protection against harmful UVA and UV-B rays.
- Ansi Z87.1-2003 exceeds high impact requirements.
- CAN/CSA Z94.3-07.
- CE EN166 certified.
-
For more than a decade, Beretta and its Research and Development department have continuously invested in designing technologically advanced accessories and apparel solutions for the Armed Forces. This experience of comparing and field-testing products together with military experts has led to the Training Gear collection for civilians - for both enthusiasts and professionals. Items from the Training Gear clothing and accessory collection are distinguished by their extensively researched high-quality materials, applied technologies and attention to detail. The range of tactical accessories is characterized by products designed for training activities at the shooting range and beyond. Features- Made of durable, water-repellent material
- Velcro fastening
- Foldable
- Inner cord
- 100.0% polyester
-
Not in stock - on order
The T-Series L2D is our main thumb-activated holster intended for service use with its full slide protection and our Jacket Slot Belt Loop. With its streamlined thumb-activated retention, the T-Series keeps your firearm at the ready while maintaining total safety. Thanks to a pulling movement that works according to the Master Grip principle, you can fight even under the most stressful conditions. A combination of reinforced outer polymer and smooth, sound-absorbing, hydrophobic lining ensures that your T-Series will perform regardless of the elements and the situation. As an extra safety measure, the L3D also has a strap over the back of the weapon. Includes Jacket Slot Belt Loop attached to the holster. Quick Dual Release (QDR) belt loop and 2-slot belt loop are sold separately.- Thumb-activated level 2 retention
- Sound-absorbing lining for stealth pulling and holstering
- Durable material provides protection with a sleek design for minimal size
- User-adjustable passive retention
- Low-friction internal material for smooth and effortless pulling
- Includes Jacket Slot Belt Loop attached to holster.
-
Not in stock - on order
Multifunctional tan neck gaiter made of high-quality flame retardant and antistatic Nomex® material. Ideal for workers who need protection against thermal hazards from heat, flames and potentially explosive atmospheres. It also provides protection against cool environments and changing weather conditions. Thanks to its versatility and elasticity, this neck gaiter can be worn in different positions for maximum protection. The soft, seamless fabric also makes it very pleasant to the touch and comfortable to wear. Workers in the petrochemical, oil and gas industries, military and police personnel who need protection against contact heat, flames, thermal hazards and other potentially explosive substances. Made of fire-resistant and antistatic Nomex® fabric for certified fire protection at a high level. Ultra-stretchy fabric for added comfort and versatility. CHARACTERIZE:- Stretchable fabric in all directions for more freedom of movement and comfort
- Seamless tube fabric for maximum comfort
- Certified product with a protective substance with antistatic properties that prevents the build-up of static electricity and thus discharges. Under certain circumstances, discharges can cause fire or explosions.
- Tested and certified fire-resistant fabric that protects against heat and flames
- The fabric structure allows sweat and steam to escape from the body. Helps keep body temperature comfortable
- Multiple features and ways to wear the same product. One BUFF® choker can be used in many ways
- Moisture-wicking fabric that allows moisture to evaporate faster
- PPE certification: CE CAT II EN ISO 13688/13, EN ISO 11612/15, EN 1149-5/18
- Color: Desert Tan
- 87% M-Aramid Dupont NOMEX® (high-quality synthetic fiber)
- 5% P-Aramid KEVLAR® (high-quality synthetic fiber)
- 4% Carbon Fiber P-140
- 4 % Elastane
-
A marker-sized camouflage paint used to paint airsoft replicas, firearms, and equipment. The marker is equipped with a sponge that efficiently covers painted surfaces. With this technique, it is easy to create simple layers and advanced camouflage patterns by novice painters and experienced users. The paint itself is non-toxic, water and scratch resistant. The paint dries after 10 minutes, but you get the best result after 48 hours. The matte tint of the paint negates light reflections and increases camouflage properties. It is easy to apply to polymers, ceramics, metals and textiles. -
A marker-sized camouflage paint used to paint airsoft replicas, firearms, and equipment. The marker is equipped with a sponge that efficiently covers painted surfaces. With this technique, it is easy to create simple layers and advanced camouflage patterns by novice painters and experienced users. The paint itself is non-toxic, water and scratch resistant. The paint dries after 10 minutes, but you get the best result after 48 hours. The matte tint of the paint negates light reflections and increases camouflage properties. It is easy to apply to polymers, ceramics, metals and textiles. -
The updated Condor Gen III Draw Down Waist Pack features a slimmer design and more storage capacity in a more streamlined profile. Perfect as a standalone fanny pack or seamlessly attached under compatible plate carriers. Thanks to its narrower width, the Draw Down sits perfectly under standard plates without restricting freedom of movement during dynamic situations. This covert support pack offers space for everyday essentials or tactical items. The loop-lined main compartment accommodates leashed accessories such as holsters, mag pouches and admin organizers. With its discreet weapon portability, the updated Draw Down is the perfect partner for your adventures at the shooting range and in the city.- Redesigned to optimize capacity while maintaining a compact size
- Wider zipper opening for easier access
- Interchangeable strap system
- Can be used as a fanny pack or attached to a plate carrier
- Loop-lined interior for hooked accessories
- Zippered back pocket for valuables
- Volume: 2.5L // 152.5 cu in
- Size: 7"H x 10"W x 2.5"D
- Size: 17.78 cm×25.4 cm×6.35 cm
- Imported
-
Handy Condor Ifak Patch to stick on any velcro surface. Perfect for providing your pouches with the IFAK identification.- Velcro strap for attachment to any loop surface
- Woven patch
- Size: 2"H x 4"W
- Size: 5.08cm H x 10.16cm W
- Imported
-
The CONDOR LCS Vector Gun belt is the latest addition to our family of load-bearing belts. With the first-of-its-kind magnetic buckle, the Vector is ideal for fast-paced, kinectic operations where every second counts. This durable belt is made from heavy-duty webbing and reinforced with an extra layer of scuba webbing to handle heavy loads. It helps distribute weight comfortably and keeps firearms and ammunition within reach. It's available in a number of classic colors to complement your uniform or gear and ensure discretion when needed. The exterior of the turret belt is made of our LCS material with non-traditional MOLLE slots to stabilize mounts and reduce weight. This versatile belt can be used in conjunction with an inner belt or as a standalone belt to meet your needs for any expedition or mission. It is equipped with a removable non-slip cushion on the inside so that it stays comfortably around your waist. Like the Condor LCS Cobra Gun Belt, this belt has a two-inch-wide webbing. Features- 2-inch wide strap
- 2-inch self-aligning magnetic buckle with side release
- Reinforced with scuba tape
- Laser-cut slots for modular accessories
- Removable anti-slip pad
- Can be used as a stand-alone duty belt or in combination with the hook inner belt as a two strap system
- Patent pending
- Imported
- X-Small/Small: 28.5" - 32.5" Belt Length, Waist 26"-28"
- Small/Medium: 34.5" - 38.5" Belt Length, Waist 30"-32"
- Medium/Large: 40.5" - 44.5" Belt Length, Waist 34"-36"
- Large/X-Large: 46.5"-50.5" Belt Length, Waist 38"-40"
- X-Large/XX-Large: 52.5" - 56.5" Belt Length, Waist 42"-44"
-
The Condor Micro Dump Pouch is a rollable universal pouch for empty mags, shotgun shells or other utensils. Suitable for 8 pieces of 5.56 NATO STANAG mags. Material 100% Polyester. data:- Small to fold.
- Large opening with elastic drawstring and pull stoppers for adjusting the width.
- Mesh bottom.
- 2 removable PALS fasteners for the MOLLE system (25 mm).
- Dimensions folded: 10 x 10 x 4 cm.
- Dimensions open: approx. 27 x 25 cm.
- Weight: approx. 140 g.
-
Ensure quick access to essential chemical sprays when needed by choosing an OC Pouch from Condor Outdoor Products, Inc. Bear spray, pepper spray, and other aerosol cans can be stored inside the pouch and attached to the outside of a uniform, vest, or chest carrier for quick access in the field, on a trail, or during a mission. The OC Pouch is equipped with a four-inch MOD strap to attach the pouch to an existing MOLLE webbing system. The OC Pouch from Condor Outdoor Products, Inc. is designed with performance in mind. The pouch has an adjustable flap and an elastic place holder to provide enough structure to access and replace the aerosols. The simple flap protects the aerosol, prevents accidental use, and keeps the aerosol securely in place. Features- Adjustable and detachable flap with Velcro
- One 4" MOD strap included
- Adjustable lower strap
- MOLLE compatible
- Overall size: 4.5"H x 2"W x 2"D
- Overall size: 11.43cm x 5.08cm x 5.08cm
- Capacity: Suitable for 1x MK3 or MK4 aerosol cans
- Imported
-
The Condor pistol warehouse bag has a universal design for practically all gun warehouses, single row and double row. The elastic sides and the adjustable Velcro fastener at the top keep the magazines firmly in place. The bag can also be used to store pocket knives, multitools, flashlights and other small tools. Material 100% polyamide Details:- Velcro fastener.
- Elastic sides.
- Detachable MOLLE / PALS fastening loops with snap buttons.
- Water drain loops on the bottom.
- Dimensions: ong. 12 x 11 x 2.5 cm.
- Weight: about 150 grams.
-
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
-
The ESS InfluxTM military goggle virtually eliminates lens fogging and thus ensures that troops remain fully aware of their situation in dynamic tactical environments. As part of the goggle's patented AdjustableVentilation SystemTM (AVSTM), the Influx RotoClipTM silently rotates the position of the lens in the frame of the goggle: choose between a dust-free, fully sealed mode or a fog-free, open-ventilation mode. With InfluxTM, troops can always see clearly and act quickly when seconds count. The RotoClipTM not only controls the AVSTM, but also enables one of the fastest lens change systems ever used in a pair of glasses. Operators can quickly and easily switch between different lens tints, allowing them to adapt more quickly to the environment and reduce the amount of time they need to work. Combined with a host of other major improvements, the InfluxTM is ready to break through the fog of war and clear the way to victory. Specifications- Patented Adjustable Ventilation SystemTM (AVSTM) provides
- Unrivalled anti-fog ventilation & full perimeter dust filtration
- Low profile, suitable for night vision with wide field of view
- Anti-microbial OpFoamTM face padding increases comfort and fit
- Advanced ESS ClearZoneTM FlowCoat lenses prevent fog on the inside and prevent scratches on the outside
- Quick-release strap twists for optimal helmet compatibility
- Interchangeable 3.0mm High Impact Polycarbonate Lenses
- Distortion-free optics & 100% UVA/UVB protection
-
The ESS Tactical XT™ is an affordable, high-quality pair of glasses with all the key performance features of the ESS Striker™ Series, without the accessories. The 40mm strap has sliders to easily adjust the strap. The 2.6mm Polycarbonate lens provides essential ballistic protection with distortion-free optical clarity. Specifications- Spacious frame fits over most prescription glasses
- Advanced ESS ClearZoneTM FlowCoat lenses eliminate fog inside and prevent scratches outside
- Full circumference ventilation & filtration system minimizes lens fogging & filters particles in the air
- High-impact 2.6mm polycarbonate lens
- Distortion-free optics & 100% UVA/UVB protection
-
Not in stock - on order
The ergonomically shaped Defender Knee Pads First Tactical™ are flexible and breathable 3D knee pads made of EVA PU foam with TPU overlay for extra protection against stones. Fits the First Tactical™ Defender Pants tactical pants. material 70% polyester, 30% polyurethane. Details:- PU foam filling with TPU overlay.
- Moisture-wicking mesh.
- Ergonomically contoured 3D design.
- Perforated foam for good ventilation.
- Weight: approx. 130 g/pair.
-
The First Tactical™ Slash & Flash Hard Knuckle Glove is a reliable and flame retardant tactical glove with cut protection. The palm of the Slash & Flash Hard Knuckle Glove is made of goatskin and Kevlar® lining. The back of the hand is made of flame retardant Nomex® Jersey. The hard TPR knuckle protection and TouchTac™ touchscreen function make it a functional tactical glove. Material Palm: 100% leather (goatskin); back of the hand: 100% meta-aramid (Nomex®); Lining back of hand: 100% cotton; lining palm: 100% aramid (Kevlar®). Details:- Soft goat leather palm.
- Kevlar® lined palm (cut protection level 2).
- Back of the hand in flame retardant Nomex® jersey.
- Hard TPR knuckle protection.
- TouchTac™ touch screen function.
- Weight: approx. 94 g/pair (size M).
- Machine wash cold
- Do not bleach
- Drying on a leash
- Do not iron
- Do not dry clean
-
Not in stock - on order
The CTB Dump Pouch QR is designed to store everything from used rifle magazines to evidence found in the field during amphibious operations. Once closed, it's small enough to be attached to a belt or tactical vest without adding much bulk. Once opened, it can house up to six AR-15 rifle magazines. The opening can be adjusted at will thanks to the elastic cord that runs along it. This pouch is equipped with the DUE EMME Quick Release buckle making it easy to open, especially useful when wearing thick gloves or during night or water operations. The MIL-C-8061 heavy mesh fabric construction effectively wicks away water and debris after a coastal insertia or any kind of water activity, keeping the user light and efficient. The FROG.PRO CTB (Cross The Border) line is specifically designed to provide amphibious special mission units with special equipment that, thanks to special fabrics and specific design choices, improves performance and survivability during operations involving working in wet environments, such as marine, fluvial, rainy or snowy areas. The LAHYCO composite fabric used for the main parts of the bag and flap is highly hydrophobic, which translates into greater mobility and lighter weight in wet environments. The LAHYCO fabric is also partially FR, and offers firmer protection against cutting, wear and tear. Our attention to detail, combined with a personalized design, offer a unique product that reflects our commitment to "state of the art" military equipment. Weight: 175 g Dimensions when closed: 14 x 8 x 5 cm Dimensions opened: 25 x 15 x 10 cm -
Electric GAMO compressor, portable all-in-one, up to 320 bar to fill the tank of your PCP. With 220V "charger" and car. With Gamo you can easily and comfortably fill your PCP; EconomicCompressor for PCP rifles 250 W· Maximum 320 bar, 3 loading phases; It's manual.· Voltage 220v, 220v charger (12V / 220V) or car connection· Weight: 9 kg
Exhaust air: 11 l / min. Rising air flow rate: 2700 r.p.m./min– 0.5 air cylinder. It takes 6 to 7 minutes from 200 to 300 bars– 0.5 air cylinder. It takes 18 to 20 minutes from 0 bar to 300 bar 110 – 220 VOnly to fill the "tank" of carbine or pistol, no large bottles. -
![Helikon-Tex E&E Pouch® [U.03]](https://shop.afullmetaljacket.com/wp-content/uploads/2023/04/MO-U03-CD-ee_pouch_u03_-_cordura-6-1000_1.jpg)
![Helikon-Tex E&E Pouch® [U.03]](https://shop.afullmetaljacket.com/wp-content/uploads/2023/04/mo-u03-cd-11_1.jpg)
A timeless classic based on a revised design by the British Special Forces. This large bag is suitable for survival and bushcraft equipment, water bottles, food rations and the like. At the back is a cover for a folding saw, knife and axe. MOLLE/PALS compatible. Features:- Integrated sleeve for knife/axe/folding saw at the back of the pouch
- Designed in collaboration with Survivaltech.pl
- with buckle
- Internal loop panel, 3 flat pockets and loop for small items with bottom hook &loop
- PALS webbing on front and sides
- Compatible with DUTY BELT/PALS/MOLLE
- Two d-rings for carrying strap (not included)
- Weight [g] 202
- Dimensions 19.5 x 15 x 7 cm / 7.7 x 5.9 x 2.8 in
- Contents [l]2
- Material 100% Nylon
- EUROPEAN PATENT No. 002994368-0001
-
Not in stock - on order
Some products have a kind of cult status. For any manufacturer, a crowd of satisfied customers is not only a huge joy, but also a confirmation that the product is good. What makes Urban Tactical Pants® so special? The cut and layout of the pockets in these pants are civilian enough to preserve anonymity, while maintaining the full functionality of combat pants, able to support tactical supplies while not clashing with human anatomy. Elastic belt with Velcro allows easy adjustment. Wide belt loops allow a belt of 50 mm wide, including all HTX tactical belts: EDC, UTL® or Cobras®. In addition, the cut used, classic for blue jeans, reduces the tendency to sink down during use. A judicious arrangement of the pockets allows the equipment to be placed close to the center mass, around the hips and waist. The edges of front and back pockets are reinforced to withstand the continuous movement of light or blade clamps. Two Velcro-sealed front pockets are large enough for a smartphone & or even an AR/AK rifle magazine. The zipped thigh pockets look flat, but the design makes pockets or wallets easy to carry. Custom made internal pockets are waiting to be filled with Low Profile Protective Pads®. Three types of fabric and a wide variety of colors make it possible to adapt the pants to the rest of the wardrobe or working conditions. Attributes- YKK® gulp with zipper
- 50 mm wide belt loops
- Wide back pockets, can be used as a rain bag
- Knee reinforcements with space for soft pads (Low Profile Protective Pads®)
- Elastic belt with Velcro
- Two classic pockets with edge reinforcements for knife/flashlight clamps
- Two loops for d-ring or carabiner on belt on front pants
- Two classic front pockets with Velcro flaps, for smartphone or AR/AK magazine
- Two cargo pockets on the thighs with YKK® zipper (reversed) for documents or other supplies
- Profiled back of the leg - divided and joined below the knee
- Classic jeans" neck on the back prevents the pants from riding down
- Holes at the bottom of the legs for ribbon or cord
- Two narrow pockets inside the back pockets for magazines or baton (with possibility of depth magnification)
- Material: 58% Cotton, 40% Polyester, 2% Elastane
-
Not in stock - on order
Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Made for larger firearms with a grip frame with a mainly straight back strap * = POSSIBLE TRIMMING REQUIRED • AK-47: Wooden handle without finger grooves • AMT: Automag II, Automag III, Automag IV, Automag V • AR-15: Handles without finger grooves • Beretta: 8000 Cougar, 8040 Cougar, 8040 Cougar F, 8045, 87 Target, 92 FS, 92 FS Inox, 92 Centennial, 92 FS Fusion, 92 G, M9A3, 96 A1, • Beretta: 92 G-SD, 92 Brigadier, 92 Brigadier INOX, 92 Vertec INOX, 92 A1, M9, M9A1, 92 Compact *, • Beretta: 92 Compact Inox *, PX4 Storm SD Type F • Bernadelli: P018S • Bersa: Thunder 9, Thunder 9 Pro, Thunder 40 Pro, BP40CC, BP9 • Browning: Hi-Power, Hi-Power Clones • Canik: TP9 • Caracal: CP660, CP661 * • Chiappa: M9-22 CZ: 75, B, BD, B-SA Variants, SP-01, SP-01 Tactical, 75 Shadow Tac II, 75 Shadow Target II, 75 Tactical Sport, 75 TS Czechmate, P-07*, • CZ: P-09, P-10, 85, 85 Combat, 2075 Rami *, 52, 2075 Rami BD *, 97, 97 BD, 100, 75 Compact *, 75 PCR Compact *, 75 P-01*, • CZ: Compact SDP *, P-06 * • Colt: 2000 • EAA: Witness, Gold Custom Xtreme *, Limited Custom Xtreme *, Stock II Xtreme, Stock III Xtreme, Match Xtreme, Elite Stock III, • EAA: Steel Full Size, Polymer Full Size, Polymer Carry, Elite Gold Team, Elite Limited, Elite Limited Pro, Elite Match, Elite Stock III, • EAA: Elite Stock I, Elite Stock II, Hunter, Match • FEG: P9M, Hi-Power Clones • FNH: FN9, FNS40, FNX40, FNX9, FNS-9, Hi-Power, MKIII also, FNX45, Forty-Nine, FAL, DSA Rifles • Heckler & Koch: VP9, VP40, P30, P30L • High standard: Victor, Olympic, Olympic Trophy, Supermatic Trophy, 10X-Victor, Supermatic Citation • Jericho: 9 mm, 941 • Kel-Tec: RDB, CMR-30, RFB, KSG • Lama: Omni Magnum Research: MR9 Eagle, MR40 Eagle, Baby Eagle III Polymer Pistols, Baby Desert Eagle III Steel Pistols Mossberg: 590 Shockwave (must be installed from the tip of the receiver's handle) • Remington: RP9 • Ruger: SR9, SR9E, SR40, SR45 • Sarsilmaz: K2P, B6, CM9, ST9, K2, K12, Kilinc 2000, P8, B6P * • SIG SAUER: P556XL Pistol, P522 Pistol, 556, 522, P250 Full Size, P320 Full Size, 228/229 *, P250C *, P320C *, M11-A1 *, SP2022 * • Smith & Wesson: 39, 52, 59, 410, 411, 439, 459, 539, 559, 639, 645, 745, 909, 910, 915, 952, 1006, 1026, 1046, 1066, 1076, 1086, 3904 , • Smith & Wesson: 3906, 4003, 4004, 4006, 4026, 4043, 4044, 4046, 4505, 4506, 4526, 4546, 4563, 4566, 4567, 4576, 4583, 4586, 5903, • Smith & Wesson: 5904, 5905, 5906, 5906 Super 9, 5924, 5926, 5943, 5944, 5946, 5967, 6904 *, 6906 *, 6926 *, 6944 *, 6946 *, SW40F, SW9 • Springfield: P9 • Steyr: Model 28, Model 30, Model 31, Firestar Model 40, Firestar model 43 Firestar Model 45 • Steyr: M40, M9, L-A1, M-A1, C-A1 • Stoeger: Cougar, Cougar (compact versions) * • Taurus: 92, 92C *, 99, 100, 101, PT957 • Tokarev: TT-30, TT-33 • Walther: P99, PPQ, PPX, CCP -
5.56 Triple Direct Action Mag Pouch from Invader Gear in Wolf Grey. -
The XPD pads are extremely light and supple, they adapt to the shape of the body and are therefore extremely comfortable to wear. They offer first-class protection and shock absorption. The cushions consist of a 1000D nylon-coated core of shock-absorbing EVA special foam and a protective plate made of hard plastic. The inside is extra lined with Cool Max, which increases the wearing comfort even more. The Rapid Deployment Clips is based on a hook-and-eye principle, so the protectors can be removed or fastened in no time. The two fastening straps can be adjusted lengthwise by means of Velcro and are made of a highly elastic material that adapts to the movements. material Upper material: 1000D Nylon; Lining: 100% Polyester Weight: approx. 200 g/pair. -
Patch of Jackets To Go for the blood type A Negative. Velcro rear. Size: 52 x 27 mm Weight: 4 g Shipping Weight: 5g -
Patch from Jackets To Go for blood type A Positive. Velcro rear. Size: 52 x 27 mm Weight: 4 g Shipping Weight: 5g -
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colours: black
- Closure: Velcro
-
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in coyote and black
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colors: Camo
- Closure: Velcro
-
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in camo and black
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colors: Coyote
- Closure: Velcro
-
Pair of black gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have flexible knuckle and finger protection and are touchscreen compatible. Product- Tactile glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Soft TPE protection over the knuckles and fingers. Special anatomical design that allows the hand to bend easily and comfortably.
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Digital leather reinforcement on the palm
- Touchscreen compatible
- Anatomical TPR soft protector for easy finger movement
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 94% Polyamide, 6% Elastane
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fiber
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Black, Coyote and Camo
- Closure: Velcro
-
Pair of black gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have flexible knuckle and finger protection and are touchscreen compatible. Product- Tactile glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Soft TPE protection over the knuckles and fingers. Special anatomical design that allows the hand to bend easily and comfortably.
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Digital leather reinforcement on the palm
- Touchscreen compatible
- Anatomical TPR soft protector for easy finger movement
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 94% Polyamide, 6% Elastane
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fiber
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Black, Coyote and Camo
- Closure: Velcro