-
Quickly connect/ disconnect the bladder tube Convenience with push button Integrated locking mechanism Fully compatible with Tactical Gear QMT -
Not in stock - on order
A traditional backpack with flap.- Zipper compartment in the valve.
- Elastic cord on top of the flap.
- Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and attachment for handset/microphone.
- The shoulder pads can be removed.
- A ballistic plate or hydration bladder can be worn in the compartment in the back compartment.
- Run-up / closure in the main compartment keeps snow and dirt out.
- 2 removable MOLLE straps on the back of the backpack, where more bags can be attached.
- Velcro for identification patch.
- Band and elastic band for microphone for the section radio.
- The backpack can be attached to the back/top of our vests and board carriers.
- Roll up the ends of all the straps to keep them tight.
- Size: 30L.
- Dimensions: B = 27, H = 46 & D = 16 cm.
- Weight: 1100 grams
-
Not in stock - on order
A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.- Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
- Content: 50L.
- Dimensions: B = 34, H = 62, D = 22 cm.
- Weight: 1850 grams.
-
Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking-
In the folded position the padded front of the pouch protects the GPS from shocks
-
The open mode makes it possible to walk and look at you GPS without removing it from the pouch
-
An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
-
On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
-
There are also Velcro straps for attaching the pouch on a carrier strap
-
Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
-
-
Not in stock - on order
The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium. -
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
Not in stock - on order
Capacity = 50 litres Fits: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. functions: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment. The backpack can be custom made by the user for radio, first aid, photo kit/surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support on the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and handset/microphone attachment. Thick padded waistband. The bag is made of wear-resistant coated polyamide and has a sturdy zipper. Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. 4 compression straps on the side are sewn to the backpack. The loose ends of the side compression straps roll up and are fastened with Velcro. The bag has one carrying handle on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you need to store. The lower compartment is suitable for 15" field laptop/computer or supplement/replacement clothing. MOLLE webbing to attach bags/bags for first aid equipment, holders for radios etc. are placed on the outside of the outer pockets. An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A man pack radio can be secured with two straps close to your back for the best weight distribution and balance. Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Optional set of plug-in bags (65-01290A00-888) is ideal for organizing in the backpack for medical equipment. Optional rain cover in grey (65-01736A09-000) Optional snow cover in white (65-01736A26-000) -
Our latest low profile design, designed for integration of ballistic vest, includes 2 liters in a ballistic vest and 3 liters in a package. Maximum use of low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. Features- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Low Profile: maximum use of low-profile technology reduces the depth of the wearer
- The horizontal blow connector allows the drinks hose to be routed out of the ballistic plate bag without kinking the hose
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; let the tube become 25 cm shorter; less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; airtight seal
- QMT hose/reservoir connector with seal ensures quick and leak-proof removal of the bladder to refill it
-
Modular drinking system, works where rear mounted systems often do not. Exclusive 3-layer constructed polyethylene construction with Taste-Free ™, low-maintenance Glass-Like ™ lining. Integrated antimicrobial Grunge-Guard ™. Features- Foldable canteen, empty foldable, filled upright
- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; 25 cm shorter tube and less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it open until dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; the airtight seal
- Gray snake.
-
Back-worn/vest-loaded modes: Quick release shoulder straps that can be used to attach the system to MOLLE straps on your vest. The Low profile drinking backpack, specially designed for ballistic vest integration. Maximum use of our low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. External filling port - Quick and easy refilling without spilling. MOLLE strap on the outside. NOTE: Only the cover is included with the product, not the bladder, hose or mouthpiece. Weight: 50 grams Dimensions: 35 × 28 × 1 cm CategorySource®: hydration Color: Black, Grey -
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
Snigel GHILLIE CLOAK -14 A lightweight camouflage net that works well with your wearer and reduces your visual and to some extent your thermal signature. To be used as a jacket or as a camouflage net. If you move, you wear it like a jacket and if you go static, you can use it as a camouflage net. The garnish (leafy patches) is sewn so that they do not get stuck in the vegetation when you move with the mantle on. At the edge of the mantle, loops are sewn flat to minimize the risk of them sticking in branches. The back of the cloak is printed in a dessert/mountain colors. Packed the volume is only 2 liters. The mantle is made of a flame retardant polyester mesh that does not suck up water and therefore does not get heavier in the rain. Dimensions: 120 x 150 cm -
The Duffel Bag from SnigelDesign is a carrying case and backpack in one. The padded handles also serve as shoulder straps so that the duffel can also be worn on the back. The main compartment has a wide opening and a light coloured inner coating so you can look closely at the inside of the bag. The two zippered side pockets are designed so that you can store a helmet in them. If you don't use it, it can be folded up to save space. The 55L duffel bag is generally accepted as hand luggage. Material 100% polyamide 600D; No.10 YKK® zippers; Duraflex® closures and buckles. Details:- Padded shoulder straps with fast-circuiting.
- Reinforced handles at the ends.
- Large main compartment with 2-zipper, zippered inner pocket and 2 Velcro surfaces for attaching additional equipment.
- Very large opening and bright inner coating making it easy to see the inside of the bag.
- Two side pockets with 2-way zipper that are large enough for a helmet.
- No.10 YKK® zippers with zipper aids that can be easily grabbed even with gloves.
- Three clear ID slots.
- Velcro surface for ID patches.
- IRR coating to reduce ir signature (stone grey olive green).
- Flame retardant supermaterial according to the specifications of the Swedish Armed Forces (stone grey olive).
- Capacity: 55 litres.
- Dimensions: ong. 28 x 31 x 65 cm.
- Weight: about 795 grams.
-
Weight: 100 g Dimensions: 25 x 25 x 25 cm Fits in: All rifles Fits on: Hang it in a carbine in the loop Features:A light weight and stable pillow that gives good support when shooting indoor or outdoor-
It only weighs 100 g
-
The pillow, which is filled with foam beads gives very good support for the lower arm
-
A big loop is sewn on one side of the bag for attaching to the outside of a vest or pack
-
Perfect to use a field support for photography
-
