• Savotta Side pouch 8L

    49,9059,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With an eight-liter capacity, this is clearly a larger side bag, which is perhaps best used on large and high backpacks of 60-100+ liters. Here are some examples of what will fit in such a bag:
    • A large tarp, hammock and accessories
    • A hammock and duvet
    • A lightweight puff jacket and pants or rain gear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook
    • A Jetboil cooker, a gas cartridge, water and lots of cooking utensils
    • More than 24 hours of rations and snacks
    • Almost a week's worth of spare underwear, interlayers and socks.
    Key features
    • Capacity approx. 8 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 270 g
    • Dimensions: 17 x 40 x 11 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Not in stock - on order
    Compatible with the Savotta tent heater (140154005) Makes it possible to use your tent heater as a sauna heater Stones not included, only use the right sauna stones 2-year material and manufacturer's warranty Made in Estonia TECHNICAL SPECIFICATIONS Weight: 1.4 kg (pair) Dimensions: 40 x 20 x 8 cm (W x L x D) Main material: Steel DESCRIPTION Is attached to the sides of the tent heater with hooks. Make sure the racks are securely secured before loading and warming the stove with stones. Before use, consult the instructions for use of the stove. After each use, clean and dry, store lightly oiled (we recommend flaxseed oil) in a dry place.
  • Savotta Side pouch 12L

    54,9064,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:
    • A tarp, hammock, duvet and accessories.
    • A lightweight puff coat, pants and rainwear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook.
    • A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.
    • A few days of rations and snacks
    • A week of spare underwear, intermediate layers and socks.
    • All kinds of big special stuff that you need to take with you.
    Key features
    • Capacity approx. 12 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 320 g
    • Dimensions: 21 x 45 x 12 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • FDF SLEEP MAT Just a smart combination of groundsheet and normal sleeping mat. This fine sedative was developed in the 1980s for the Finnish armed forces and is also used by them. The extra insulation and protection provided by the fabric upholstery on the side offers great comfort on snowy and uncomfortable terrain. This keeps the sleeping area cleaner and thanks to the non-slip layer of rubber-coated fabric, you won't slip away with your sleeping bag either. Extremely robust and designed for the toughest use - a device we are rightly proud of! TECHNICAL SPECIFICATIONS:
    • Length: 190 cm.
    • Width cushion: 50 cm.
    • Valves: +25 cm on both sides.
    • Total width: 100 cm.
    • Weight: 960 grams.
    • Roll size: 50 cm x ø22 cm.
    • Filling: full foam 12 mm.
    • Material: nylon 210D, PU-coated.
    • Non-slip: rubber-coated fabric
    Warranty: The product has a 2-year warranty for material and manufacturing defects.
  • Not in stock - on order

    SAVOTTA BACKPACK 123

    By today's standards, the 123, which has been in production since the 1950s, has an authentic retro vibe! A classic design that is practically the same as the design that was used in Finland in the early years of the 20th century. A simple bag with two smaller side pockets, leather shoulder straps and guard flaps with buckles. A stylish choice for both hunting and everyday use. Compartments The main compartment of the bag is sealed with a large flap that is fastened with a belt. The bag has no compartments on the inside, which means that unusual and even large devices fit in it. It is a good idea to pack smartly by, for example, putting folded clothing changes against the back. This way, your backpack has a functional back padding. On the outside of the bag there are two smaller side pockets. SUPPORT SYSTEM The shoulder straps of the backpack are simple leather straps. The length can be adjusted with the metal buckles in the lower corners. When the backpack is on your back, the upper end of the shoulder straps ensures that the bag is securely fastened. TECHNICAL SPECIFICATIONS: External dimensions: height 50 cm, width 43 cm, depth 10 cm. Content: 28 l. Weight: 840 grams. Materials: paraffin-treated cotton, vegetable tanned leather and metal buckles Color: green Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
    This backpack has been removed from the Savotta range. The Savotta 339 backpack is still available in the offer.
  • Savotta JÄÄKÄRI S

    135,00149,00

    JÄÄKÄRI S

    The small backpack of the family Jääkäri, capacity approximately 20 litres. The Jääkäri S is a very versatile day pack, great for outdoor travel, travel and daily use. The slim and compact design combined with the unobtrusive shoulder straps allow for unhindered movement in tight spaces and on difficult terrain. The PALS fastener offers many options for fitting extra bags and equipment on the outside of the backpack, extending the capabilities to more than just a day backpack. GREEN COLOR KEY FEATURES Content 20 l Woven shoulder straps with low profile Main compartment with folding lid Zipper pocket on the inside of the lid Internal hydration compartment Compression straps on the side PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag product TECHNICAL SPECIFICATIONS Weight: 775 grams Dimensions: 45 x 25 x 16 cm (H x B x D) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester DETAILED DESCRIPTION The main compartment is closed with an extremely simple lid system: the opening of the bag folds over itself when the lid is closed, creating a safe seal. This is a very simple, very bomb-free design. A zippered pocket on the inside of the lid provides secure storage for your wallet, keys, travel documents and phone. The locking system and compression straps on the side provide some adjustment to the volume of the backpack. Fasten it tightly or loosen it, depending on the load carried. The capacity of the Jääkäri S can be set from 20 to 30 litres, depending on how you fold the top cover. A hydration compartment is attached to the inner back wall. Tube ports on both sides allow you to guide the drinks long from the left or right, while the other port remains free for other uses, such as antennas or cables. The low-profile shoulder straps are made of 40 mm wide web, with ladder lock buckps in the lower corners of the bag for adjustment. With the 25 mm strap on top of the shoulder straps you can use chest straps, drinks hoses etc. Confirm. MILITARY GRADE MATERIALS Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defense and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The tires and edge tape we use are, again according to the FDF specifications, strong polyester bands in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as standard, as should be since the same materials are used in official military equipment. MODULAR AND CUSTOMIZABLE With PALS straps on the sides and the lid, you can attach extra bags and equipment. This system offers numerous options to customize the package to your specific needs. Not only for pouches, the PALS band can also be used for attaching utility straps, shock cord, carbine hooks etc. Four singelluses at the bottom can be used to attach utility straps. The Jääkäri S can be rolled up into a fairly tight package to carry in a larger backpack for use as a day backpack.
  • Not in stock - on order
    A classic retro backpack for a hunter; the design has remained unchanged since the 1950s. After making something that works once, why fix the design if it is not broken! Just as great for hunting, camping and the city today as it was 60 years ago.
    Due to its size, the 323 saddle sack is ideal for one or two day hunting trips: the backpack holds the necessary overnight equipment, provisions and other useful gadgets and tools comfortably. Once upon a time when men were made of steel and women as tough as nails, you could survive for weeks just with the saddle sack (or months, if you ask remote patrollers who served in wars), sleeping in the wilderness and eating what nature has to offer. Although the needs of a modern camper are different, a good backpack design is still a good backpack design. The traditional saddle sack is as fine a carrying device as it ever was, and it has the sort of a romantic retro vibe that you just cannot find in contemporary backpacks.

    COMPARTMENTS

    The main compartment of the bag (dimensions approximately 45 x 35 x 25 cm) is closed by tightening the opening which is covered with a flap that can be secured with leather straps. The straps are long enough to attach, for example, a rolled sleeping mat or blanket under the flap. If necessary, additional detachable straps can be used to lengthen the straps. The size of the main compartment of the backpack is large enough to fit even a heavy winter sleeping bag inside. The side pockets (dimensions approximately 33 x 10 x 6 cm) are closed with fitted flaps with good coverage and secured with leather straps. The side pockets are ideal for packing large Thermos flasks and other cumbersome, long supplies. The back pocket (dimensions approximately 20 x 30 x 6 cm) is closed with a flap equipped with two leather straps. You can pack plenty of small supplies into the generously sized outer pocket for quick and easy Access.

    OTHER ATTACHMENT POINTS

    There are attachment loops on the sides of the opening for detachable straps. By using straps, it is possible to attach long rolls, such as a blanket or a sleeping mat, securely on top of the bag. Ensure sturdy attachment by closing the flap of the bag over the roll.

    CARRYING SYSTEM

    A special feature of the saddle sack is its steel pipe frame which enables steady and comfortable carrying. The sturdy frame holds the bag firmly in shape and the horizontal leather strap stretched across the lower part of the frame sits comfortably against your lower back, keeping the bag itself from touching your back. The shoulder straps are wide leather straps, the length of which can be adjusted with buckles. Because of the steel pipe frame, it is much more comfortable to carry the saddle sack than a frameless backpack, particularly over long distances and with a heavy load.

    TECHNICAL SPECIFICATIONS:

    External dimensions: height 45 cm, width 45 cm, depth 25 cm. Capacity: approximately 50 l. Weight: approximately 1.40 kg. Materials: paraffin-treated cotton, vegetable-tanned leather and steel buckles. Frame: steel pipe. Colour: olive green with black leather parts.

    WARRANTY AND GUARANTEE:

    The product has a 5-year guarantee against material and manufacturing defects.

    KEY FLAG PRODUCT:

    This Finnish Key Flag product is partly manufactured on our factory in Estonia, however more than 50 % of its work is made in Finland.
  • Not in stock - on order

    KEIKKA 30L

    The smallest variant of our Keikka duffel bags, capacity 30 litres. Designed as a multifunctional, user-customizable bag for everyday use, work, travel, sports and virtually anything but walking. Full range of carrying options: handles, handles, shoulder strap and fastening points for a padded backpack harness. Compatibility with numerous Velcro accessories offers extra flexible internal organization. This bag is built with materials and methods of military quality and is made to withstand everything you need. Coming in October 2020! KEY FEATURES Content 30 l Handles wrap around the bottom Handles at both ends Detachable shoulder strap Attachment points for optional backpack harness Main compartment with zippered lid Two internal mesh compartments Side compartment with zipper and versatile internal organization Flat side compartment with Velcro closure Loop for accessories with hook on the inside of the lid and side pocket Loop for IDs and side and end patches Removable/replaceable filling on the inside of the lid and bottom 5-year warranty on material and craftsmanship TECHNICAL SPECIFICATIONS Weight: 1.18 kg Dimensions: 30 x 25 x 45 cm (B x H x L) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Buckles: steel Filling: foam with closed cells DETAILED DESCRIPTION The main compartment measures 25 x 25 x 45 cm and is accessible via a large zipper. The inside of the lid is equipped with strips loop for attaching accessories with a hook back. The main compartment is a hollow space with two mesh pockets, one at each end, to help organize smaller items. The external side compartment measures 35 x 23 x 5 cm and is designed for quick access and organization of smaller items and A4 documents. The back wall features two flat mesh pouches and a D-ring and two webbing tabs to secure valuables with a teat cord or buckles. The inside of the front wall is equipped with a loop for attachment of accessories with a hook back. The flat external pouch with Velcro closure measures 24 x 20 cm and is suitable for A5 documents and similar smaller objects. Two 10 x 15 cm loop fields on the side and end of the bag accept most name bands and a number of other identification data. Each D-ring can also be used to confirm name tags. We have put extra energy into providing the best possible carrying experience. Due to the length of the carrying brackets, the bag remains well at a comfortable carrying height and a good control is possible. Each end is equipped with a handle for comfortable lifting during transport. Six steel D-rings are used to attach the included adjustable shoulder strap, which offer different orientations to suit your personal taste. The D-rings are also the fastening points for the optional padded shoulder straps. MODULAR AND CUSTOMIZABLE The loop strips in the main compartment and side compartment cover are suitable for various hook-to-loop fastenable accessories, pockets and organizers. This allows you to customize your bag to your preferences, or build it into a specialized toolbox for whatever work you need it. The foam filling with closed cells on the inside of the zippered lid and the bottom of the bag can be easily removed, replaced or reinforced. This allows the end user to easily adjust the bag with extra padding or plastic inserts if that extra level of protection or padding is required. The Keikka series bags can use an optional (separately available), padded clickable backpack harness. While carrying the backpack, the foam filling with closed cells on the inside of the lid provides a basic level of comfort against your back, even if you carry annoying mess in the bag. When a backpack with a bag like this should be as uncomfortable as possible, let's face it - this will never be as comfortable as a real backpack. Instead of building our bags with unergonomic, too long handles that also serve as shoulder straps, we've decided to make this a separate option for those who really need it, so we can build each carrying option in the right way for the intended feature. MILITARY GRADE MATERIALS AND CONSTRUCTION The bags from the Keikka series are made to last. The carrier handles are made of a single length of 50 mm wide band that wraps around the bottom of the bag, sandwiched between two layers of 1000D Cordura. Stress points are reinforced with double stitching and seams are finished with binding tape to prevent fraying. All carrier buckps are made of steel and are likely to last longer than the rest of the bag. Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defence and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The webbing and edge band we use are, again according to the FDF specifications, strong polyester band in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as they should be, as the same materials are used in official military equipment. PROPER RESPONSIBLE PRODUCTION We manufacture the vast majority of our products ourselves in our own factories in Karstula, Finland and Tartu, Estonia. Product development and special production phases such as laser cutting and metalworking take place in our main facility in Finland, the cutting and sewing of textiles takes place both in Finland and in Estonia. Here at Savotta we do not dream of low labour costs, but we work constantly hard to keep the production in our own hands! LEARN FINNISH WITH SAVOTTA In Finland we have something like "keikka", like at a gig (concert), business trip or burglary. For a boulder case you need a bag, a bag of the right size with handles and shoulder strap, preferably with some basic pockets for organization. And it must be strong enough to carry a heavy burden. "Keikkalaukku" ("laukku" = bag) has for decades established itself as the general Finnish term for duffel bags, bags for equipment, you know THAT a certain type of good heavy transport bags. We've been making heavy backpacks since before most of our current employees were born, it's about time we started making a real series of duffel bags! Now you're so much smarter. Well done, Finnish is a damn difficult language to learn!
  • Not in stock - on order

    HIISI FOLDABLE SAUNA SOFAS

    The Hiisi folding sauna bench is designed for Savotta tent saunas. The structure is foldable, making the benches compact to wear. The benches are made of light firewood that has been treated for the sauna environment. A bank can accommodate two people. The banks are made in Finland. The benches consist of two parts: the collapsible frame and the seat. The assembly is quick and easy. The frame part is folded open and forms the basic structure of the benches, including footrests. The chair is then placed on top of the frame, making the structure more stable. The whole is secured in place with the help of handy Velcro fasteners that round the attachment of the seat to the frame. Hiisi benches are ideal for the Hikimaja sauna, the small sauna tent, the Hiisi sauna tent and the JSP sauna tent. A bench is enough for the Hikimaja sauna, but the small sauna tent and hiisi sauna tent each offer space on two benches. The JSP sauna tent, on the other hand, is more spacious and can accommodate six benches. TECHNICAL SPECIFICATIONS: Material: spruce wood, treated with a sauna protector Color: light spruce Bench dimensions (mounted): Width 99 cm, depth 69 cm, seat depth 40.5 cm, height 57 cm Sofa dimensions (folded): Width 99 cm, depth 69 cm, height 17 cm Weight: 13 kilos WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This product is made in Finland.
  • Savotta JÄÄKÄRI M

    209,90229,00

    JÄÄKÄRI M

    The medium day backpack of the Jääkäri family, capacity approximately 30 liters. The Jääkäri M is an improved model of the Light Border Patrol backpack, originally designed for the Finnish Border Patrol. The sleek design offers unhindered movement in tight spaces and difficult terrain. The PALS fastener offers many options for fitting extra pockets and equipment on the outside of the backpack. An internal plastic frame blade gives the backpack stiffness, while the compression straps help you tie your load up to a tight package. As part of the Border Guard heritage, the shoulder straps, the lap belt and the back lining are designed to be more comfortable to wear than most backpacks of this size. KEY FEATURES Content 30 l Padded shoulder straps with chest strap Padded hip strap Main compartment with floating lid and side zip Zipper pocket on the inside of the lid Internal hydration compartment Compression straps on the side Internal plastic frame sheet PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag product TECHNICAL SPECIFICATIONS Weight: 1.75 kg Dimensions: 52 x 25 x 17 cm (H x B x D) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Frame plate: HDPE DETAILED DESCRIPTION A collar with drawstring covered with a floating lid closes the main compartment at the top. A full-length side zip provides quick access to smaller items stowed in the main compartment. A zippered pocket on the inside of the lid provides secure storage for your wallet, keys, travel documents and phone. The floating lid and compression straps on the side offer a wide range of adaptability to the backpack's capacity. Fasten it tightly or loosen it, depending on the load carried. The compression straps ensure that additional equipment can be attached to the outside of the backpack if necessary. External side pockets at the bottom can be used to provide tools, tripods etc. Secure to the sides of the backpack. A hydration compartment is attached to the inner back wall. Tube ports on both sides allow you to guide the drinks long from the left or right, while the other port remains free for other uses, such as antennas or cables. With PALS straps on the backpack's lap belt, sides and lid, you can attach extra bags and equipment. This system offers numerous options to customize the package to your specific needs. Not only for pouches, the PALS band can also be used for attaching utility straps, shock cord, carbine hooks etc. Four singelluses at the bottom can be used to attach utility straps. MILITARY GRADE MATERIALS Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defense and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The tires and edge tape we use are, again according to the FDF specifications, strong polyester bands in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as standard, as should be since the same materials are used in official military equipment. SUPPORT SYSTEM The Jääkäri M has an internal frame of plastic plate, giving it the necessary stiffness to stay upright when loaded with clumsy and bulky equipment. Both the shoulder harness and the lap belt are tightly filled with foam with closed cells. The shoulder harness is S-shaped and has a detachable chest strap. The forward-pulling lap belt is also easy to put on under load. The buckle on the side provides quick and easy opening when needed. The lap belt is equipped with an additional cushion for lower back support. CONNECTION OF FINNISH BORDER GUARD In the early 1990s, a compact Savotta walking backpack, simply called the "608", was chosen as the starting point for the design of a new day backpack for the Finnish Border Guard. This then changed to the 'Kevyt Rajapartio' or Lightweight Border Patrol backpack, a very modern backpack for its time: narrow design for mobility, side zipper, compression belts and rifle fastening. Most striking was a very sturdy carrying system and an aluminum reinforced frame - something you rarely see on packaging of its size. This venerable design was chosen in 2013 as the basis for the development of what would become the Jääkäri M, the first in the modern range of Savotta packs with a construction and functionality of military quality. This worked out very well and the Jääkäri M was followed by his siblings: the Jääkäri S, L and XL.
  • Not in stock - on order

    BACKPACK 339

    The cave-like, easy-to-pack bag and the wearing comfort of an external steel frame make the 339 a great choice for longer trips. A classic model from the 1950s, only the materials have been renewed over the years but the design has remained the same. Compartments The main compartment is closed by tightening the opening with drawstring which is covered with a flap that can be fastened with straps. The straps are long enough to, for example, attach a coiled sleeping mat or blanket under the flap. If necessary, additional detachable tyres can be used to extend the tyres. The contents of the bag can also be accessed quickly via the small side zipper on the right side of the opening. Special is that on the sides of the bag there are strings that can be used to tighten it to make the bag firm with less stuff in it, the adjustment range is about 10 cm. Conveniently, you can pack extra supplies behind the side cords, for example a camping axe. The side pockets are ideal for packing large thermos bottles and other cumbersome, long necessities. You can put lots of small necessities in the generous outdoor compartment for quick and easy access. SUPPORT SYSTEM The frame of the support device is the steel tube frame of the 339. The lower part of the frame is curved and forms a base on which the backpack can also be placed safely on sharp stony ground. The supporting carrying system, similar to backpacks with external frame, ensures comfort. The back length is adjustable steplessly for users of different lengths. Your upper back is against stretched mesh and your lower back in turn against a belt saddle: these prevent the bag itself from largely hitting your back, which makes for less sweaty conditions. The shoulder straps are wider than normal and padded, a chest strap with buckle gives extra support. The support point of the shoulder straps is located at the top of the frame. It is possible to adjust the center of gravity of the backpack even while walking by tightening and loosening the adjusting straps of the shoulder straps. The operating principle is about the same as with the supporting support systems of external frame backpacks. TECHNICAL SPECIFICATIONS: External dimensions: height 50 cm, width 45 cm, depth 25-35 cm. Content: about 55-65 l. Weight: approximately 1.90 kg. (Weight frame 650 g) Material: cotton treated with paraffin, polyamide band. Frame: steel tube. Colour: olive green with black buckles. WARRANTY AND WARRANTY: The product has a 5-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
  • Product description
    SA-10 set of poles (8poles +1 middlepole) for Guerilla tent.
    Weight
    3.5 kg Country of origin Finland
  • Not in stock - on order

    Savotta Stove

    297,90

    SAVOTTA STOVE

    Savotta stove & stone rack warm Savotta's tents easily and with the stone rack the stove can also be used as a sauna stove in Savotta's Small sauna tent. The stove is also perfect for cooking. This way you can make coffee quickly and easily. At the stove comes a 7-piece smoke tube, which runs smoothly in the stove. Savotta stove and stone rack are sold separately.

    TECHNICAL INFORMATION:

    Weight: approximately 18 kg Height: 31 cm (+ 5 cm chimney slit) Width: 32 cm Depth: 42 cm Material: steel Country of origin : Estonia Height with legs about 55 cm. Size of hair: Fireplace opening: width 23cm, height 10cm Fireplace: height 17cm, width 27cm and depth 41cm The length of the pipes that come with the stove is sufficient for the SA-20 tent. In the case of an elevated tent model, consider the need for additional pipes. Optional stone lattice. (sold separately) The product has a 1-year warranty for material and manufacturing defects.
  • Not in stock - on order
    Border controls A classic from 1989, known in Finnish as the Rajapartio, originally designed for the Finnish border guard. An internal tubular aluminium frame helps to carry unwieldy and heavy loads. What is special is that the Rajapartio backpack has attachment points for a rifle on the outside. Originally designed to carry an assault rifle, the attachment points can also be used very well to attach, for example, a camera tripod or other long special supplies. Compartments The upper main compartment (dimensions approximately 45 x 35 x 22 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a large flap that is secured with straps. The generous length of the straps offers plenty of space under the flap to overpack. In the flap is a large, open pouch. When the valve is closed, the opening of the bag is facing upwards and closes so that the contents do not fall. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a water bag or other flat stuff. The lower compartment of the bag (dimensions about 15 x 35 x 20 cm) is closed with a two-way zipper and fastened with the same straps used to close the flap of the backpack itself. The side compartments (dimensions approximately 30 x 15 x 6 cm) are sealed with waterproof protective collars and covered with flaps that can be secured with straps. The side pocket on the left also has a vertical zipper which makes the contents of the box quickly accessible. OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find fastening loops to carry a rifle. The loops are also equally suitable for carrying other exceptionally long devices. The load is secured by tightening a belt that encloses the entire backpack. There are attachment points for detachable straps on top of the flap. Large essentials that otherwise do not fit in the backpack can be fastened on top of the flap. The side compartment on the right is tunnel-shaped and there is a mounting point above for a detachable belt. For example, it can easily hold an axe. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The buckle of the hip belt can be detached very quickly with one hand. A very valuable function in a possible emergency. With the support handle on the top, the backpack is also easy to carry by hand. The back is reinforced with an internal, square tube frame made of DUR aluminum. This lightweight frame keeps the backpack upright and is comfortable to carry, even with a slightly heavier load. The support frame can also be removed from the backpack if desired. TECHNICAL SPECIFICATIONS: External dimensions: height 65 cm, width 50 cm, depth 25 cm. Content: approximately 60 l. Weight: about 2.00 kg. Materiaal: 1000D Cordura Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 5-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland.
  • Not in stock - on order
    HIKIMAJA Based on the very first Savotta sauna tent from decades ago, the Hikimaja is a double portable sauna tent for outdoor use, easy to place and mounted almost anywhere. The light weight and compact packaging size make transport and storage easy. Take it to the beach, deep forests, mountains or backyard and enjoy a good warming Finnish sauna session wherever you are. Stove and sofa are sold separately! KEY FEATURES
    • Designed for two people
    • Easy to transport and set up
    • Compatible with the Savotta stove + stone rack
    • Fire retardants
    • Includes transport bag
    • Four corner poles and five poles included
    • 2-year warranty on material and manufacture
    • Finnish Key Flag Product
    TECHNICAL SPECIFICATIONS Weight: 3.7 kg (including all accessories) Dimensions: 150 x 170 x 140/160 cm (L x B x H) Pack size: 170 x 20 x 30 cm Floor area: 2.55 m² Material: 210D PA (FR), fire retardant and mould resistant DETAILED DESCRIPTION Decades ago we made a simple small boxy sauna tent, which was forgotten over the decades and replaced with larger, more intricate designs. The function and idea of that now long-lost design was brought back as the Hikimaja, our smallest, simplest sauna tent. The word "hikimaja" is Finnish for (about) "sweat cottage", this is a very simplistic sauna tent built around the idea of making it as compact, simple and portable as possible. The Hikimaja is built around a very simple geometry - it's a box and that's all. Four corner poles keep the tent upright, this design eliminates the need for a center bar and reduces the number of accessories to just four corner poles and four pegs. The corner poles are inserted into the sleeves on the outside of the tent, making the interior slightly less crowded. The materials are fire retardant for safety, but not fire proof, so sparks and flames will burn holes in them, so be careful. The interior is large enough for a double sofa and the stove. The stove is at the bottom of the wall, the sofa against the opposite upper wall. The entrance is a simple zipper over the middle of the front wall, zipper - entry - zipper. The tent, poles and poles can be neatly stored in a carrier bag for transport. A shoulder strap makes it easy to wear, so you have your hands free for heaters or other accessories. INSTRUCTIONS - READ BEFORE USE! We recommend two to four people to set up the Hikimaja. You need a hammer or similar tool to smash the poles into the ground. Find a suitable flat spot about 3.5 x 3.5 m, beware of dangers: Dry grass and undergrowth, trees and branches (fire hazard). Uneven surface (heater or users may stumble and fall). Unseed and insert the canes into the sleeves. Spread out the tent cloth with sticks that are placed approximately in the desired spot. Set one or two opposite angles at the same time: Hammer a stick about in the ground. 150 cm from the corner. Attach the corner rope to the pole with a reliable knot. Repeat until all corners are in place and each shaving line is pinned to the ground. Install the telescopic center pole, use the pen to adjust it for the correct height and tension. Inspect the tent, correct if necessary by adjusting the poles, poles and ropes. Install heater and bench. Do not heat the Hikimaja above 75 °C, extreme overheating can damage the tent and is unnecessary - it is steam that makes the sauna pleasant, not hot air. Enjoy (carefully)! WARNINGS - READ FOR USE! This sauna tent is designed to be heated with the Savotta wood stove and stone rack. If used incorrectly, the heated heater can cause numerous hazards and bodily injury: Savotta sauna tents are not designed for long-term idling and must be disassembled, cleaned, dried and stored indoors between use. Sunlight will damage the substances over time. By keeping a tent upright for several months, it is damaged and any damage caused by this type of abuse is not covered by our warranty. To prevent tent damage from falling sparks, the top of the chimney should protrude 100 cm above the chimney opening. We recommend burning hardwood to minimize the risk of sparks. Although the substances are fire retardant and self-extinguishing, they are not fire-safe - sparks and flames damage and burn holes in the fabric. Heater heated tents will in normal use incur some burnt holes due to sparks that touch the fabric. This is normal wear and tear and easy to repair if necessary. Our warranty does not cover fire damage due to normal or incorrect use. Use only stones intended for sauna use. Incorrect stones can burst when heated and cause injury due to flying shrapnel. Sparks and heat from the stove can set fire to flammable material nearby, easily remove combustible material in and near the tent before use. Always keep a generous bucket of water or a fire extinguisher within seconds of the tent if the heater is hot, be prepared to extinguish any fire! The stove and stones are extremely hot when heated and can cause injury when touched.

    The Hikimaja sauna tent is no longer in the Savotta range. This was replaced by the Hiisi 4 and Hiisi 2.

  • Product description
    SA-20 set of poles (8poles +1 middlepole) for SA-20 tent.
    Weight
    4.5 kg Country of origin Finland
Go to Top