• Weight: 100 g Dimensions: 25 x 25 x 25 cm Fits in: All rifles Fits on: Hang it in a carbine in the loop Features:
    A light weight and stable pillow that gives good support when shooting indoor or outdoor
    • It only weighs 100 g
    • The pillow, which is filled with foam beads gives very good support for the lower arm
    • A big loop is sewn on one side of the bag for attaching to the outside of a vest or pack
    • Perfect to use a field support for photography
  • Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:
    A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking
    • In the folded position the padded front of the pouch protects the GPS from shocks
    • The open mode makes it possible to walk and look at you GPS without removing it from the pouch
    • An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
    • On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
    • There are also Velcro straps for attaching the pouch on a carrier strap
    • Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
  • Not in stock - on order
    A tight-fitting flame retardant hat that can be used under a helmet. Lightweight and thin to be comfortable in most situations, yet warm enough to protect from the cold. Flatlock seams for more firmness. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane
  • The Duffel Bag from SnigelDesign is a carrying case and backpack in one. The padded handles also serve as shoulder straps so that the duffel can also be worn on the back. The main compartment has a wide opening and a light coloured inner coating so you can look closely at the inside of the bag. The two zippered side pockets are designed so that you can store a helmet in them. If you don't use it, it can be folded up to save space. The 55L duffel bag is generally accepted as hand luggage. Material 100% polyamide 600D; No.10 YKK® zippers; Duraflex® closures and buckles. Details:
    • Padded shoulder straps with fast-circuiting.
    • Reinforced handles at the ends.
    • Large main compartment with 2-zipper, zippered inner pocket and 2 Velcro surfaces for attaching additional equipment.
    • Very large opening and bright inner coating making it easy to see the inside of the bag.
    • Two side pockets with 2-way zipper that are large enough for a helmet.
    • No.10 YKK® zippers with zipper aids that can be easily grabbed even with gloves.
    • Three clear ID slots.
    • Velcro surface for ID patches.
    • IRR coating to reduce ir signature (stone grey olive green).
    • Flame retardant supermaterial according to the specifications of the Swedish Armed Forces (stone grey olive).
    • Capacity: 55 litres.
    • Dimensions: ong. 28 x 31 x 65 cm.
    • Weight: about 795 grams.
    Designed in Sweden, made in the EU.
  • Not in stock - on order
    The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium.
  • Not in stock - on order
    A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.
    • Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
    • Content: 50L.
    • Dimensions: B = 34, H = 62, D = 22 cm.
    • Weight: 1850 grams.
    This item has been replaced by the upgraded version Snigel 50L mission backpack 2.0 -- > https://shop.afullmetaljacket.com/product/snigel-50l-mission-backpack-2-0/
  • Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions.
  • Beware: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. Can be attached to the tactical vest Features: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment The backpack can be custom-made by the user for radio or medical equipment. Ventilated back with plastic plate and aluminum support at back to make it sturdy but customizable Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone The shoulder pads can be stored behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap A ballistic plate or drinking bag can be transported in the rear compartment The bag is made of wear-resistant coated polyamide fabric and sturdy zippers Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened Push button in the main compartment ensures that the zipper does not open too much Four long compression straps on the side are sewn to the backpack The loose ends of the side compression straps are rolled up and fastened with Velcro The bag has two carrying handles, one on the side and one on the top Main compartment has two inner compartments with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment The outer compartments have a zipper and each has an elastic mesh pocket with zipper on the inside Modular webbing to mount bags/bags are placed on the outside of the outer pockets An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open A man pack radio can be secured with two straps close to your back for the best weight distribution and balance (straps not included) Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Access holes for radio or computer cables are placed on each side of the backpack The cable for the radio microphone is inserted through the access hole into the lower part of the backpack and then the microphone is attached to the shoulder pad Owner identification can be written on the Velcro The backpack is suitable for carry-on dimensions The backpack can be attached to the back/top of our modular equipment vest -10 and plate carriers. MOLLE tires on the sides. Capacity = 30 litres. 22L in the main compartment, 6L in the lower outer compartment and 2L in the upper outer compartment.
  • Not in stock - on order
    A traditional backpack with flap.
    • Zipper compartment in the valve.
    • Elastic cord on top of the flap.
    • Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and attachment for handset/microphone.
    • The shoulder pads can be removed.
    • A ballistic plate or hydration bladder can be worn in the compartment in the back compartment.
    • Run-up / closure in the main compartment keeps snow and dirt out.
    • 2 removable MOLLE straps on the back of the backpack, where more bags can be attached.
    • Velcro for identification patch.
    • Band and elastic band for microphone for the section radio.
    • The backpack can be attached to the back/top of our vests and board carriers.
    • Roll up the ends of all the straps to keep them tight.
    • Size: 30L.
    • Dimensions: B = 27, H = 46 & D = 16 cm.
    • Weight: 1100 grams
  • Not in stock - on order
    A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g.
  • Not in stock - on order
    The Princess is a lightweight, handy backpack for many missions. Carries all kinds of equipment; radio, medical supplies or personal equipment. With a stiff back plate and padded carrying straps, it can handle heavy loads, while still having a low profile. On the inside a fastening for a drinking system, with drinking hose ports on both sides of the backpack. A spacious inner pocket for the bladder or other objects that need to be separated from the main compartment. A large zipped pocket all over the back. MOLLE webbing for extra pockets etc. Dimensions: W=28 cm, H=43 & max D=20 cm. Volume: 15L Weight: 545g
  • Not in stock - on order
    KEY FEATURES
    • Two full-length zipped side pockets in each side
    • Attaches to the 50L Mission backpack 2.0 with zippers
    • Can be worn together as a backpack or individually over the back.
    • Can be worn individually around the waist.
    • 6 webbing loops on the outside.
    VERSIONS 29-02140B09-000 - Grey Material
    • 100% Nylon -PU coated
    • All fabrics, buckles and belts are IRR compliant.
    • The substance is FR.
    Dimensions
    • 2x11L
    • H= 48, W= 21 & D=13 cm
    WEIGHT 0,45 kg / piece
  • Quickly connect/ disconnect the bladder tube Convenience with push button Integrated locking mechanism Fully compatible with Tactical Gear QMT
  • Not in stock - on order
    An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest
  • We have removed the MOLLE from the front of the bag in this new version. A handy shoulder bag for all those things that end up in your arms when you least wish for it. Easy to carry and keeps everything you wear at your fingertips. A grab bag with six inner compartments for warehouses, radios and all kinds of tactical or outdoor equipment during your hikes. Two compartments are equipped with a zipper to further secure the contents. Opening with zipper to the main compartment and a drawstring closure inside. Removable shoulder strap with buckle. Removable waistband with buckle. Eyelet in the soil to let water through. Also very useful for walks with your dog to bring the necessary things.
    • Weight: 450 g
    • Dimensions:30 × 30 × 17 cm
    • Volume: 10L
  • Our latest low profile design, designed for integration of ballistic vest, includes 2 liters in a ballistic vest and 3 liters in a package. Maximum use of low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. Features
    • Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
    • Low Profile: maximum use of low-profile technology reduces the depth of the wearer
    • The horizontal blow connector allows the drinks hose to be routed out of the ballistic plate bag without kinking the hose
    • Angled valve: rotates 360 degrees for perfect valve/mouth orientation; let the tube become 25 cm shorter; less excess tube bouncing around the chest
    • Dirt shield valve cover to protect the nozzle from dirt
    • Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
    • Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
    • Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
    • Care-Free: cleaning by simply rinsing the system and hanging it dry (if used with water)
    • Widepac closure: patented sliding closure for easy tapping and cleaning; airtight seal
    • QMT hose/reservoir connector with seal ensures quick and leak-proof removal of the bladder to refill it
    Weight: 220 grams Dimensions: 34 x 27 x 2 cm CategorySource® hydration Color: Grey

Title

Go to Top