-
Niet op voorraad - op bestelling
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Niet op voorraad - op bestelling
Een touwtje met noodontgrendeling aan de achterkant voor het dragen van een identiteitskaart of iets dergelijks. Onze portemonnee kan er ook in worden gedragen. Afmetingen: L=80 cm. -
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g -
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
Een symbool om uw competentie als medicus op de tas of buidel te markeren Klittenband achterkant Wordt aan de buitenkant van de tas bevestigd met klittenband-lusjes 25x25 mm -
Niet op voorraad - op bestelling
For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g -
Niet op voorraad - op bestelling
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 2 x 30 round 5,56 magazines
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments.Low cut front for fast access. Large flap for dirt protection. Inside elastic band to secure one magazine. Eyelet in the bottom to let water out.Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
De Duffel Bag van SnigelDesign is een draagtas en rugzak in één. De gewatteerde handvatten dienen tevens als schouderbanden zodat de duffel ook op de rug gedragen kan worden. Het hoofdvak heeft een brede opening en een lichtgekleurde binnencoating waardoor je goed naar de binnenkant van de tas kunt kijken. De twee zijzakken met ritssluiting zijn zo ontworpen dat u er een helm in kunt opbergen. Als je hem niet gebruikt, kan hij worden opgevouwen om ruimte te besparen. De plunjezak van 55 L wordt algemeen geaccepteerd als handbagage. MATERIAAL 100% polyamide 600D; No.10 YKK® ritsen; Duraflex® sluitingen en gespen. Details:- Gevoerde schouderbanden met snelsluitingen.
- Versterkte handgrepen aan de uiteinden.
- Groot hoofdvak met 2-wegritssluiting, binnenvak met ritssluiting en 2 klittenbandvlakken voor het bevestigen van extra uitrusting.
- Zeer grote opening en heldere binnencoating waardoor het gemakkelijk is om de binnenkant van de tas te zien.
- Twee zijvakken met 2-wegritssluiting die groot genoeg zijn voor een helm.
- No.10 YKK®-ritsen met ritssluitinghulpmiddelen die zelfs met handschoenen gemakkelijk kunnen worden vastgegrepen.
- Drie duidelijke ID-slots.
- Velcro-oppervlak voor ID-patches.
- IRR-coating om de IR-signatuur te verminderen (steengrijs olijfgroen).
- Vlamvertragend bovenmateriaal volgens de specificaties van de Zweedse strijdkrachten (steengrijs olijf).
- Inhoud: 55 liter.
- Afmetingen: ong. 28 x 31 x 65 cm.
- Gewicht: ongeveer 795 gram.
-
Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:An elastic glove keeper to carry gloves on the belt-
Fits most gloves
-
Threads onto the equipment belt
-
Velcro closure
-
Light weight
-
-
A light and very comfortable trouser belt. Suitable when you do not carry heavy weights in your pockets. It is elastic and adapts to your body, while still not being flimsy. Made of the same elastic band that we use in the Army's single-point weapon holder for the AK5. The belt is cut to a fitting length in the end that is fastened in the buckle, and the edge is burnt to seal it and prevent fraying. The buckle is easily fitted and removed. A tip is to remove only the buckle and keep the strap in the pants, when passing through security at airports.- Material: Polypropylene tape
- Weight: 90 g
- Dimensions: The belt is 128 cm long.
- Width of the band 40 mm.
-
Een grijze en zwarte patch met de tekst EOD. 50 x 25 mm. Haak klittenband aan de achterkant zodat de patch kan worden bevestigd aan zakjes en tassen met lusklittenband. -
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included. -
Niet op voorraad - op bestelling
Een nauwsluitende vlamvertragende muts die onder een helm kan worden gebruikt. Lichtgewicht en dun om comfortabel te zijn in de meeste situaties, maar toch warm genoeg om te beschermen tegen de kou. Flatlocknaden voor meer stevigheid. Materiaal: 59% Modacryl/29% FR Polyester/9% Katoen/3% Elastaan -
Niet op voorraad - op bestelling
Weight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:A simple glove keeper to carry gloves on the belt-
Fits most gloves
-
3 press button adjustment for different sized gloves
-
Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
-
Light weight
-
