-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
Not in stock - on order
Features:- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
The Mil-Tec Plate Carrier Vest Gen. II is a ballistic protection plate insert with modular webbing on the front, back and side of the vest. With this plate carrier, the abdominal band can be omitted, resulting in a light and flexible plate carrier that is closed by a belt with a Fastex buckle. Material 100% polyester (Oxford) polyvinyl chloride coated shoulder straps: 100% thermoplastic elastomers Details:- Molle loop system on the front and back, as well as on the side straps
- 3 rubber loops on the front for attaching equipment
- Small pocket with Velcro at the front
- 3 Velcro strips on the front for attaching patches
- Full front opening of the vest with 3 large, strong Velcro closures
- Shoulder straps can be opened with Velcro
- The vest can be quickly put on and off thanks to the elastic band system on the back
- Front and rear plate ceramics level III and IV can be used
- Internal belt holder for ceramic plates 25 x 30 cm.
- Weight: about 930 grams
-
Not in stock - on order
The Agilite MD2™ is a smart, compact trauma kit designed for superior uptime and performance. It contains essential life-saving medical supplies and has an exceptionally low profile.- Fast, ambidextrous deployment.
- Integrated External Combat Turnstile Holder
- External 6" trauma scissor holder.
- Micro MOLLE attachment optimized for combat belts.
- Optional mounting for plate carrier (sold separately).
- Internal organization with 4 pockets and space for a decompression needle or marker.
-
Not in stock - on order
Optimized to hang the MD2 Compact Trauma Kit or other Trauma kits on the bottom of your plate carrier. Also functions as a side wing under your cummerbund, providing an internal attachment option for MOLLE pockets such as magazine bags or radio pockets. The QD grommet slots offer the convenience of side mounting the hanger, even when using quick-release buckles such as TubesTM or 2M ROC buckles. MD2 Compact Trauma Kit not included. Content for illustrative purposes only. -
5.11 Tactical® brings you the TacTec ™ Plate Carrier, which is designed to be the most lightweight and best-fitting plate carrier you can find and constructed to ensure high performance while remaining light and mobile. Dimensions Suitable for 24 mm wide medium (12.5" H x 9.5" L x 2 "B) and large (13.25" x 10.25 " x 2.25") SAPI plates Standard abdominal straps are suitable for a circumference of 52" with the elastic relaxed, and up to 57" when fully stretched DETAILS FEATURES Improved comfort and freedom of movement Suitable for medium or large ballistic plates Shoulder pads on the back yote evenly distribute the weight Hard-wearing 500D nylon Adjustable waist and tension bands (sizes XS-XL) Extendable GrabDrag handle for emergency exfiltration Quick-tensioner with one hand Water-repellent coating Extra-large airflow panels Durable Duraflex® hardware Web ID loop Suitable for Rogue® men's and women's weight vests -
Attacks usually don't happen if you have your full gear on hand. The Agilite Laptop Carrier gives you the ability to take a hidden emergency system with you wherever you go. The Agilite Laptop Carrier™ was initially designed for Israeli secret security services to blend into civilian environments, but always maintain emergency protection, equipment and a minimalist platform from which to fight. It fits soft or hard armor inserts and can go from laptop bag to plate carrier in seconds, so you can attack a shooter quickly and hands-free. As professionals who carry laptops every day, it was just as important to us that the day-to-day functions were as well thought out as the emergency functions. It fits all common laptop sizes, including 15.6". It also has storage compartments for a computer charger, mouse, headphones, tablets, notebooks, keys and other essentials. It's also designed for rifle and pistol magazines, turnstiles and knives, and more. It has a special Loop CCW area for attaching holsters. The included Gray man cover can be removed in seconds to reveal a loop area for ID patches. If bullets are flying around, it is important that you are recognizable to friendly troops as an aid worker and not as a threat. The Laptop Carrier will not look out of place in a coffee shop, a university campus, a business meeting or with executive security staff. Details- Suitable for all common laptop sizes, including up to 16".
- Storage compartment for computer charger, headphones and more
- Also serves as a 100% concealable plate carrier for emergencies
- Goes from shoulder carrier to plate carrier in seconds
- Fits soft or hard armor plates up to 11"x14"
- Quick access to CCW bag for pistols, magazines, turnstiles and more
- MOLLE loop area for ID patches with removable 'Grey Man,' cover
- Passage for rear luggage handles
- 500D CORDURA® Mil Spec Tactical Nylon.
- Dimensions: 12.9"x17.7"x2.3"
- Weight: 624g
- Main compartment for hard or soft armor plates 11"x14" or smaller
- Special compartment for soft armor plates of 9"x14" or smaller
- Suitable for all common laptop sizes up to 16".
- One size fits all body types
- Main compartment for hard armor and/or Soft Armor plates 11"x14" or smaller
- Special compartment for soft armor plates of 9"x14" or smaller
- Suitable for all common laptop sizes up to 16".
-
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
Not in stock - on order
The 5.11 Tactical All Missions-Plate carrier offers a high level of comfort, a secure fit and freedom of movement thanks to its flexible, customizable design. HYPALON® wide and padded shoulder straps ensure even weight distribution and removable chest and back cushions ensure optimal ventilation and thus prevent heat development. The front and back are equipped with laser-cut MOLLE-Velcro and HEXGRID® panel, providing individual equipment with MOLLE or Velcro-compatible equipment. The HEXGRID® panels are removable and can be replaced with 5.11 Gear Set ™-compatible equipment. The HEXGRID® mounting platform is MOLLE-compatible and offers vertical, horizontal and diagonal assembly capabilities thanks to its special honeycomb-like structure. The All Missions record carrier also offers three abdominal strap options: fast-circuit belts, elastic stretch with plug-in capability for radio, magazines or side plates, and a HEXGRID®-abdominal strap. The All Missions plate carrier is suitable for all common protective plates, such as SAPI and ESAPI. Material Main material: 100% nylon 500D; HEXGRID®: 420D / 1000D Cordura® nylon; Duraflex® hardware. Details:- 5.11 Gear Set ™ compatible.
- Padded and adjustable shoulder straps made of HYPALON®.
- Detachable bodypads (chest and back).
- 1 patented HEXGRID® assembly panel.
- 1 patented HEXGRID® kangaroo bag mounting panel.
- MOLLE Velcro surfaces at the front and back.
- Velcro loops for cable management.
- Extendable recovery and rescue lever.
- Suitable for all common protective plates, such as SAPI and ESAPI.
- Triple abdominal strap option (webbing, elastic waistband and HEXGRID®)
- Possibility of lateral insertion for eg. Radio, magazines and side protection plates.
- GSA/TAA compatible.
- Weight: approx. 1440 g (size S / M).
-
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Not in stock - on order
Side plates are vital to staying alive in a gunfight, but are often bulky and clunky. The Agilite Flank™ side plate carriers ensure that your side plates have a low profile, are comfortable and integrate seamlessly with your Plate Carrier. - Incredibly low profile and lightweight for maneuvering in tight CQB environments - Fits 6"X6" or 6"X8" side plates - Can be mounted both internally and externally via MOLLE low-profile mounting - Integrated low profile rib cage to prevent chafing - Compatible with all MOLLE Cummerbunds including the K-Zero Plate Carrier (internal mount), K19 Plate Carrier (external mount) and WarFighter™ Cummerbund. Sizing - Fits 6"X6" or 6"X8" side plates (including Blindside™ side plates) - Compatible with the following Agilite platforms: K-Zero plate carrier (internally mounted) K19 plate carrier (externally mounted) Warfighter™ garter (internally mounted) **FLANK™ SIDE PLATE CARRIERS ARE SUPPLIED IN PAIRS** Dimensions: 7*6.5*8 inch(18*17*20cm) Weight: 90gr Materials: - Laser cut Velcro overlay panels - 500D CORDURA ® Mil Spec Tactical Nylon *plate carrier not included, for illustrative purposes only. -
With the Agilite Molle Placard you can easily expand your plate carrier with molle rows. The back of the placard consists of velcro and 2 G-hooks. -
Not in stock - on order
TacTec™ Plate Carrier Side Panels are rugged and durable pouches engineered to complement the TacTec™ Plate Carrier System by providing secure storage for protective ballistic plates, maximizing protection in hostile environments. Each pouch features reinforced attachment straps for stable carry and a laser-cut web platform on the face for fully customizable accessory storage. Compatible with the 5.11 SlickStick™ attachment system.FEATURES DETAILS
- Ballistic plate storage for the TacTec™ Carrier
- Laser-cut web platform for additional storage
- Reinforced attachment straps
- Compatible with the 5.11 SlickStick™ system
- Sold as a pair
- Fits 6" x8" plates with a thickness of up to 1"
- Imported
-
Not in stock - on order
The RPC is the latest evolution of Warrior Assault Systems carriers. Designed as a lightweight and versatile low-profile wearer that offers enhanced mobility without sacrificing protection. The RPC is designed to make medium and large SAPI and ESAPI stand-alone s and the most common 10" x 12" I.C.W.s available. The bags are supported with 3D mesh for added ballistic performance comfort and body heat removal. The Recon carrier comes standard with ladder-style tummy straps that are attached to the front of the RPC via 2 removable ITW SR clips. This allows for quick access when entering and disembarking the RPC (ITW SR clips have a combined breaking strength of 600 lbs per side). The shoulders of the RPC can be worn in 3 different configurations as a smooth low profile with the addition of Velcro-lined shoulders and wrap around the sleeve for hydration and communication. The RPC comes standard with a removable MOLLE front cover held in place by 2 vertical SQM clips and strong Velcro, allowing the panel to be removed and replaced with a wide range of preconfigured weapon-specific pouch panels and Warrior's new Pathfinder Chest Rig. The RPC can be integrated with Warrior's new rear panel Made of high-quality fabric
