-
A tight fitting FR neck gaiter that can be used to protect your neck, as adust cover for your mouth or as a beanie. Light weight and thin to be comfortable in most situations. Material: 63% Lenzing FR/ 29% Conex/ 5% Twaron/ 2% Elastane/ 1% Belltron Hat and equipment not included, for illustrative purposes only. -
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g -
A small, lightweight, safe and flexible pouch for your first aid kit- The bag is closed with Velcro. Pull the strap to open the pouch (can be used with gloves).
- You can attach the pouch to all our carriers. It can be attached with the flap up or down.
- The bag does not absorb water and does not gain weight in rain
- The eye in the bottom of the bag may oms water
- The fastening system with snaps makes it possible to attach the pocket to any equipment vest or belt
-
Not in stock - on order
A lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm. -
A small zippered pocket on the front for papers, pens etc.- MOLLE tires at the front.
- Velcro-covered exterior where you can attach a patch.
- Window on the inside for cards or notes.
- Inside elastic compartments for pens or papers.
- Tuck in fastening system makes it possible to attach the bag to any equipment vest or belt.
- The new version, 21-00309B is 4 cm wider and has a compass compartment on the back.
- Weight:110 g
- Dimensions:16 × 14 × 1 cm
-
A well designed belt to improve your comfort when you carry a normal loadWeight: 250 g Fits: All pouches and holders Features:-
Plastic reinforced
-
One belt construction
-
3 point security buckle, prevents unwanted opening
The belt fits the following waist measurements:Small: 75-103 cmMedium: 85-113 cmLarge: 95-123 cmXLarge: 105-133 cm -
-
Weight: 200 g Dimensions: L= 17 & W= 17 Fits on it: All types of pouches Fits on: Trouser belts and equipment belts Features:A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg-
It fits securely on your belt. Double layers of modular webbing where pouches can be securely attached
-
The leg attachment plate is soft and can hardly be felt when worn
-
It weighs only 200 g
-
The leg straps are elastic to sit tight and comfortably
-
It is suitable for most pouches and holders in our system
-
It does not soak up water and will not be heavier when wet
-
-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included. -
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Not in stock - on order
A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g. -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
Not in stock - on order
A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg It fits well on your belt. A firm and ventilated spot on your leg for one to four pouches. Mesh, perforated plastic film and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure attach the leg plate to your leg. Quick release buckle with swivel function attaches the leg plate to your belt. The leg attachment plate is soft and barely palpable while wearing. The leg straps are elastic to sit tight and comfortable. It is suitable for most pouches and holders in our system. It does not absorb water and does not gain heavier when wet. One size fits everyone. Fits: Pistol holster and all kinds of pouches Beware: Belts and equipment belts Weight: 300g -
A safe, easy, smooth and breathable leg mounting plate that is easy to use, attach and remove from the leg. It fits securely to your belt. A firm and ventilated place on your leg for one to four pouches. Mesh, perforated plastic sheet and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure keep the leg plate on your leg. The quick release with swivel function attaches the leg plate to your belt. The leg plate is soft and barely noticeable when wearing. The leg straps are elastic so that they are tight and comfortable. It is suitable for most pockets and holders in our system. It does not absorb water and does not gain weight when wet. One size fits all. Fits: Pistol holster and all types of pouches Beware: Belts and equipment belts -
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Features:The bag for shotgun ammunition-
Carried on your leg for easy access to a bag full of shotgun cartriges
-
Elastic mesh top for easy access and semi secure storage
-
Flap opens up out so it won´t block the access to the ammunition
-
Flap with velcro closure to really secure the contents of the bag
-
Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.
-
-
Not in stock - on order
An equipment belt system with an inner and an outer belt. The 45 mm wide inner belt is carried in the trousers and the outer 45 mm wide belt is attached on theinner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
A 50 mm wide belt that can be used in many ways. To wear any pouch around your shoulders or waist. Like a hip belt on backpacks. As a light combat belt. A 40 mm garter oiler. 50 mm band and 25 mm tyres with 40 mm wide MOLLE openings, vertically on one side of the 50 mm band and horizontal on the other. A double adjustable buckle on the side closes the sling. -
An equipment belt system with an inner and an outer belt. The 38 mm wide inner belt is carried in the trousers and the outer 38 mm wide belt is attached on the inner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Not in stock - on order
Weight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Not in stock - on order
A small backpack or pouch for your ballistic plate.- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
-
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
Not in stock - on order
Features:- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
Not in stock - on order
No stock item. It is made to order and normally has a delivery time of 16 weeks. If you order 50 or more, the price drops, but the delivery time increases to about six months. Pieces can also be obtained separately.
