-
Not in stock - on order
An equipment belt system with an inner and an outer belt. The 45 mm wide inner belt is carried in the trousers and the outer 45 mm wide belt is attached on theinner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
A light and very comfortable trouser belt. Suitable when you do not carry heavy weights in your pockets. It is elastic and adapts to your body, while still not being flimsy. Made of the same elastic band that we use in the Army's single-point weapon holder for the AK5. The belt is cut to a fitting length in the end that is fastened in the buckle, and the edge is burnt to seal it and prevent fraying. The buckle is easily fitted and removed. A tip is to remove only the buckle and keep the strap in the pants, when passing through security at airports.- Material: Polypropylene tape
- Weight: 90 g
- Dimensions: The belt is 128 cm long.
- Width of the band 40 mm.
-
An equipment belt system with an inner and an outer belt. The 38 mm wide inner belt is carried in the trousers and the outer 38 mm wide belt is attached on the inner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
A well designed belt to improve your comfort when you carry a normal loadWeight: 250 g Fits: All pouches and holders Features:-
Plastic reinforced
-
One belt construction
-
3 point security buckle, prevents unwanted opening
The belt fits the following waist measurements:Small: 75-103 cmMedium: 85-113 cmLarge: 95-123 cmXLarge: 105-133 cm -
-
Not in stock - on order
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 2 x 30 round 5,56 magazines
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments.Low cut front for fast access. Large flap for dirt protection. Inside elastic band to secure one magazine. Eyelet in the bottom to let water out.Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
Not in stock - on order
Features:- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included. -
Not in stock - on order
A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g -
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
Weight: 50 g Dimensions: L= 14, W= 8 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a large bunch of keys and keeps them from rattling-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment -
A very small lightweight general purpose pouch with a wide opening top zipper.- It opens on 3 sides for an easy access to the contents of the pouch.
- The zipper is semi stiffened to be easier to open and close.
- Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
- Inside loops for securing the contents.
- Bottom drain hole.
- Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
- This system makes it possible to attach the pouch without removing other pouches from the belt.
- Fits inside: Radio, field dressing, small binoculars or other similar sized items.
- Measurements: L= 19, W= 8 & D= 4
- Weight: 100 g
- Volume: 1L
-
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Long and narrow gear like flashlights and other similar items. Dimensions: H = 15 cm, W = 4 cm, D = 3 cm Weight: 50 g. -
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Not in stock - on order
A lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm. -
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Not in stock - on order
Weight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Not in stock - on order
A small backpack or pouch for your ballistic plate.- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Not in stock - on order
For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g -
Military Trauma and Blood-Clotting Wound Dressing- The EB is based on the traditional 4-inch military personal field bandage and is designed to treat a variety of wounds, from small to life-threatening wounds.
- The built-in, patented pressure applyer can apply more than 30 pounds of pressure directly to a wound.
- The locking rod, which secures the Wrapping Leader in a simple, quick and familiar movement, can also be used to apply extra pressure to a site of the wound.
- Other unique features include the Stop & Go detachment, which allows the bandage to be applied in a controlled manner without risking it unraveling, and the Handle Loop, a wrapping leader fold next to the bandage pad that allows the dressing pad to be properly opened and positioned at the site of the wound.
- When installing yourself, the grip loop facilitates correct bandaging - even with one hand.
- The bandage is double vacuum packed to ensure integrity and sterility, while opposing tear notches on the outer packaging facilitate opening.
- Article: 26-00143-09-000
- Weight: 90 g
- Dimensions: 10 x 6 x 4 cm
-
Weight: 900 grams Dimensions: 43x 28 x 10 cm Fits on: cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or in the multifunctional bag Features:- An insert for the cameras, VCR's and other optical or sensitive equipment that can be carried alone or in the Specialist Backpack-small / 25L.
- Removable walls that can be customized to your equipment.
- Hard plastic and soft foam on all sides of the insert to protect the sensitive equipment inside.
- On the inside of the valve are three zippered pockets for memory cards, cleaning supplies etc.
- A handle.
-
Not in stock - on order
Weight: 700 grams Dimensions: 32 x 28 x 8 cm Fits on: cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or in the multifunctional bag Features: An insert for the cameras, VCR's and other optical or sensitive equipment that can be carried alone or in the Specialist Backpack-small / 25L. Removable walls that can be customized to your equipment. Hard plastic and soft foam on all sides of the insert to protect the sensitive equipment inside. On the inside of the valve are 4 zippered pockets for memory cards, cleaning supplies etc. 2 handles. -
Weight: 1,2 kg Dimensions: 54 x 34 x 11 cm Fits: Cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or inside the specialist backpack medium/40L Features:An insert for the cameras, video recorders and other optical or sensitive equipment that can be carried on its own or in the Specialist Backpack-medium- Removable walls that can be configured to suit your equipment
- Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside
- The outside has a zipped compartment for papers and pens and can be used as a "table" in a surveillance operation
- The flap can be removed and attached to the Specialist Backpack-medium for easier access
- 6 zipped compartments for memory cards, cleaning equipment etc are placed on the inside of the flap
- Padded shoulder strap with snap hooks
- 2 handles
-
Weight: 4,6 kg Dimensions: L= 98 cm, H= 36 cm, W= 20cm Fits in: HK416, G36, M4, MP5, pistol, radio,magazine/clip, weapons cleaning material Fits on: Can be carried in the hand, over the shoulder or on the back Features:A covert, light, safe and flexible bag for storage and transport of sensetive personal equipment.The idea is that all sensetive equipment is stored in the bag and that it can be locked away as one piece of luggage. This gives you full controll over your sensetive equipment.- Does not absorb water so does not get any heavier in rain
- The bag is made from hard wearing/durable polyamide coated fabric and is padded with 20 mm plastic foam and protected with 1 mm rigid plastic. The bag is lined with a light coloured material on the inside which makes it easy to clean and to find things inside as most weapons and accessories are black.
- The opening is zipped and with velcro band so that the bag is well sealed when closed.
- There are two windows for owner identification on the bag, one each on the top and one of the ends.
- The bag has two carrying handles and one shoulder strap with padding. A concealed backpack carrying system is behind the back plate for when you need to use both your hands.
- The bag is descreet as it does not resemble a weapons bag.
- Under the back panel there is a concealed backpack carrying system when you want to use the bag as a backpack.
- The bag has two main compartments that each can accommodate one weapon - MP5 or Automatic Carbine
- Many internal compartments for magazines/gun clips, radio, pistol, accessories etc.
- The partitioning wall that divides the main compartments has several compartments for magazines/gun clips, weapons cleaning kit and other accessories. The wall is secured with velcro bands and can be removed from the bag to make space for larger items.
- Large outside pocket that can be folded out and used as a ground cloth when you clean your weapon. It has inside compartments for pistol and radio with accessories is padded with 5 mm foam to protect it's contents.
- The lid can be opened all the way with two parallel zippers. This makes it easy to get to the contents of the bag.
- The handles can be connected with a padded piece of fabric and velcro.
- The shoulder strap is detachable.
-
Weight: 3 kg Dimensions: L= 62 cm, H= 35 cm, W= 20 cm Fits in: G36, M4, C8, AK5, HK53, pistol, radio,magazine/clip, weapons cleaning material Fits on: Can be carried in the hand, over the shoulder or on the back Features:A covert, light, safe and flexible bag for storage and transport of sensetive personal equipment.The idea is that all sensetive equipment is stored in the bag and that it can be locked away as one piece of luggage. This gives you full controll over your sensetive equipment- Does not absorb water so does not get any heavier in rain
- The bag is made from hard wearing/durable polyamide coated fabric and is padded with 20 mm plastic foam and protected with 1 mm rigid plastic. The bag is lined with a light coloured material on the inside which makes it easy to clean and to find things inside as most weapons and accessories are black
- The opening is zipped and with velcro band so that the bag is well sealed when closed
- There are two windows for owner identification on the bag, one each on the top and one of the ends
- The bag has two carrying handles and one shoulder strap with padding. A concealed backpack carrying system is behind the back plate for when you need to use both your hands
- The bag is descreet as it does not resemble a weapons bag
- Under the back panel there is a concealed backpack carrying system when you want to use the bag as a backpack
- The bag has two main compartments that each can accommodate one weapon - MP5 or Automatic Carbine
- Many internal compartments for magazines/gun clips, radio, pistol, accessories etc.
- The partitioning wall that divides the main compartments has several receptacles for magazines/gun clips, weapons cleaning kit and other accessories. The wall is secured with velcro bands and can be removed from the bag to make space for larger items
- Large outside pocket with inner compartment for pistol and radio with accessories is padded with 5 mm foam to protect its contents
- The lid can be opened all the way with two parallel zippers. This makes it easy to get to the contents of the bag
- The handles can be connected with a padded piece of fabric and velcro
- The shoulder strap is detachable
-
Not in stock - on order
A very, very large roller bag for all your gear and some more.
One large side pocket with inside compartments. Expandable with 50 extra liters in the top, making into a 230L black hole for storage. A pull handle in each end to make it easy to pull it out of a car or other storage place. Large heavy duty wheels that can be changed if they are broken. Three windows for owner information, Velcro patch for unit patches. Large U-shaped flap that can be opened and all the inside is exposed. The flap can be used to stand on, to protect your feet when changing clothes. The flap can be fully opened so you can stand on it when you change clothes. Hole bands on the outside where you can attach our Duffel straps, so extra equipment can be lashed on the outside. The inside is covered with Velcro fabric so insert pouches can be attached. Two inside zippered compartment. The inside is supported by a plastic frame to permanently keep the bag upright, so it is easier to work with. Reinforced bottom with plastic skids and feet. Size: 180L, expanded 230L. Dimensions: L=85, H=45 & H=45 cm. Weight: 5800 g -
Not in stock - on order
Duffel bag and backpack in one. The padded handles work as shoulder straps as well. A very large, zippered opening for easy access and overview of the main compartment. Two side compartments in the ends makes it easy to organize the packing, and are large enough for your helmet. One zippered smaller compartment inside the flap for equipment that you wish to tuck away. One grab handle in each end. Three windows and one large Velcropatch for patches. Loop Velcro fabric on parts of the interior where you can attach our insert pockets to get extra organized. Weight: 1000g Dimensions: H= 32 W=43 & L= 87cm Volume: 120L -
A gray and black patch with the text MOE for Method Of Entry. 50 x 25 mm. Hook Velcro at the back so that the patch can be attached to bags and pouches on Velcro surfaces. -
Not in stock - on order
- A versatile support pillow for snipers.
- You can shoot in all directions.
- Soft in the top and solid in the bottom.
- Friction fabric on the top that keeps the gun in place.
- Tension straps hold the cover in place around poles and on other surfaces.
-
Not in stock - on order
A string with emergency release buckle in the back to carry a identity card or similar. Our wallet can also be carried in it. Dimensions: L=80 cm. -
Weight: 100 g Dimensions: 25 x 25 x 25 cm Fits in: All rifles Fits on: Hang it in a carbine in the loop Features:A light weight and stable pillow that gives good support when shooting indoor or outdoor-
It only weighs 100 g
-
The pillow, which is filled with foam beads gives very good support for the lower arm
-
A big loop is sewn on one side of the bag for attaching to the outside of a vest or pack
-
Perfect to use a field support for photography
-
-
A very comfortable, flexible, quickly accessible and safe carrying system for your weapon With vest attachment on the vest, the weapon can be worn on the vest with this single point attachment. You avoid the uncomfortable load of your neck that you get from a regular rifle slinger. Weight: 90g Dimensions: 4 x 40 cm Fits in: Most weapons in 7.62 or 5.56 mm Beware: In the vest attachment (RSWA-09) -
The Duffel Bag from SnigelDesign is a carrying case and backpack in one. The padded handles also serve as shoulder straps so that the duffel can also be worn on the back. The main compartment has a wide opening and a light coloured inner coating so you can look closely at the inside of the bag. The two zippered side pockets are designed so that you can store a helmet in them. If you don't use it, it can be folded up to save space. The 55L duffel bag is generally accepted as hand luggage. Material 100% polyamide 600D; No.10 YKK® zippers; Duraflex® closures and buckles. Details:- Padded shoulder straps with fast-circuiting.
- Reinforced handles at the ends.
- Large main compartment with 2-zipper, zippered inner pocket and 2 Velcro surfaces for attaching additional equipment.
- Very large opening and bright inner coating making it easy to see the inside of the bag.
- Two side pockets with 2-way zipper that are large enough for a helmet.
- No.10 YKK® zippers with zipper aids that can be easily grabbed even with gloves.
- Three clear ID slots.
- Velcro surface for ID patches.
- IRR coating to reduce ir signature (stone grey olive green).
- Flame retardant supermaterial according to the specifications of the Swedish Armed Forces (stone grey olive).
- Capacity: 55 litres.
- Dimensions: ong. 28 x 31 x 65 cm.
- Weight: about 795 grams.
-
Fits: Most weapons in 9 mm, 7.62 or 5.56 mm Beware: On the body or on the equipment vest Features:- A very comfortable, flexible, quickly accessible and safe carrying system for your weapon
- With vest fastening to the weapon can be worn to the vest. You avoid the uncomfortable strain on your neck that you get from a regular gun belt
- The long pendulum like an ordinary weaponling
- The long pendulum is attached to the vest
- The weapon is firmly stuck in the pendulum
- The standard hooks on your weapon are used
-
Material: Polyamide and steel Applications: People in handcuffs who are not allowed to run away Beware: Most pouches, but the best in the carrier bag Features:- A sling to prevent apprehended people from running away
- Strong tires and buckle
- The buckle opens the "wrong" way to make it harder for the prisoner to open it
- Used in combination with handcuffs
- Easy and quick to attract
-
Not in stock - on order
- If you really want to carry your little gun hidden, this is a good option.
- Works for right- or left-handed users.
- Suitable for a small gun.
- Padded with 3D spacer lining to be as comfortable as possible.
- Wear it under your pants.
- Elastic waistband with Velcro closure.
- Holder for a spare warehouse.
-
Suitable for: MP5 or something. Shotgun. Also carbines like M4 or something like that Beware: The kit vest or belt Features:- The holder keeps an extra weapon tight and at your fingertips
- Attached to the side of our equipment vest
- The weapon is fastened with the semi-rigid strap and Velcro that sits tightly around it
- It is normally used to attach a shotgun to open the door
- A shotgun, MP5, other machine guns and carbines can be secured with it
- Must be used together with a sling
-
Snigel GHILLIE CLOAK -14 A lightweight camouflage net that works well with your wearer and reduces your visual and to some extent your thermal signature. To be used as a jacket or as a camouflage net. If you move, you wear it like a jacket and if you go static, you can use it as a camouflage net. The garnish (leafy patches) is sewn so that they do not get stuck in the vegetation when you move with the mantle on. At the edge of the mantle, loops are sewn flat to minimize the risk of them sticking in branches. The back of the cloak is printed in a dessert/mountain colors. Packed the volume is only 2 liters. The mantle is made of a flame retardant polyester mesh that does not suck up water and therefore does not get heavier in the rain. Dimensions: 120 x 150 cm -
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
Quickly connect/ disconnect the bladder tube Convenience with push button Integrated locking mechanism Fully compatible with Tactical Gear QMT -
Back-worn/vest-loaded modes: Quick release shoulder straps that can be used to attach the system to MOLLE straps on your vest. The Low profile drinking backpack, specially designed for ballistic vest integration. Maximum use of our low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. External filling port - Quick and easy refilling without spilling. MOLLE strap on the outside. NOTE: Only the cover is included with the product, not the bladder, hose or mouthpiece. Weight: 50 grams Dimensions: 35 × 28 × 1 cm CategorySource®: hydration Color: Black, Grey -
Modular drinking system, works where rear mounted systems often do not. Exclusive 3-layer constructed polyethylene construction with Taste-Free ™, low-maintenance Glass-Like ™ lining. Integrated antimicrobial Grunge-Guard ™. Features- Foldable canteen, empty foldable, filled upright
- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; 25 cm shorter tube and less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it open until dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; the airtight seal
- Gray snake.
-
Our latest low profile design, designed for integration of ballistic vest, includes 2 liters in a ballistic vest and 3 liters in a package. Maximum use of low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. Features- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Low Profile: maximum use of low-profile technology reduces the depth of the wearer
- The horizontal blow connector allows the drinks hose to be routed out of the ballistic plate bag without kinking the hose
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; let the tube become 25 cm shorter; less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; airtight seal
- QMT hose/reservoir connector with seal ensures quick and leak-proof removal of the bladder to refill it
-
Not in stock - on order
SPEED MAGAZINE POUCH 2.0 The size is easy to change with the elastic cord. Low profile to make working in an open hatch or in a car easier. The elastic cord closure in the top is quick and easy to open Low cut out to remove the warehouse faster. 25 mm MOLLE tires on the outside so you can attach other bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet at the bottom to leave out water. Tuck-in mounting system makes it possible to attach the pouch to any equipment vest or strap. The mounting system is easy to use on both the standard 25mm MOLLE/PALS system. Storage capacity: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. -
Not in stock - on order
Capacity = 50 litres Fits: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. functions: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment. The backpack can be custom made by the user for radio, first aid, photo kit/surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support on the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and handset/microphone attachment. Thick padded waistband. The bag is made of wear-resistant coated polyamide and has a sturdy zipper. Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. 4 compression straps on the side are sewn to the backpack. The loose ends of the side compression straps roll up and are fastened with Velcro. The bag has one carrying handle on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you need to store. The lower compartment is suitable for 15" field laptop/computer or supplement/replacement clothing. MOLLE webbing to attach bags/bags for first aid equipment, holders for radios etc. are placed on the outside of the outer pockets. An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A man pack radio can be secured with two straps close to your back for the best weight distribution and balance. Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Optional set of plug-in bags (65-01290A00-888) is ideal for organizing in the backpack for medical equipment. Optional rain cover in grey (65-01736A09-000) Optional snow cover in white (65-01736A26-000) -
Not in stock - on order
It is designed to carry and protect the Multipurpose pouch medium 10, Olive, but can also be used to wear and protect large lenses or other technical equipment. It has a stiff plastic layer around the sides to protect the contents of the bag. Shoulder strap MOLLE band on the sides Material: Polyurethane coated polyamide fabric Fits in it: NVG, large lens, camera, medical equipment or technical equipment Beware: Over your shoulder or around your waist functions: A simple bag with flap with zipper. Article number: ONVGP-10C Weight: 400 grams Dimensions: 14 × 18 × 23 cm Colors: Coyote Only available in color Coyote. Other colors are to illustrate the model.
