-
Not in stock - on order
The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium. -
Not in stock - on order
A tight-fitting flame retardant hat that can be used under a helmet. Lightweight and thin to be comfortable in most situations, yet warm enough to protect from the cold. Flatlock seams for more firmness. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
A tight fitting FR neck gaiter that can be used to protect your neck, as adust cover for your mouth or as a beanie. Light weight and thin to be comfortable in most situations. Material: 63% Lenzing FR/ 29% Conex/ 5% Twaron/ 2% Elastane/ 1% Belltron Hat and equipment not included, for illustrative purposes only. -
Not in stock - on order
An equipment belt system with an inner and an outer belt. The 45 mm wide inner belt is carried in the trousers and the outer 45 mm wide belt is attached on theinner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
The belt to use for carrying something heavy- Reinforced with a semi rigid plastic sheet
- It supports the load, does not twist or sag and remains comfortable
- Adjustable from 84cm to 110 cm waist
- Swivel buckle and Velcro adjustment
- Channel for cable ties
Fits in: All pouches, holsters and drop leg holdersFits on: Most bodiesWeight: 90 gDimensions: 84- 110 cm -
A light and very comfortable trouser belt. Suitable when you do not carry heavy weights in your pockets. It is elastic and adapts to your body, while still not being flimsy. Made of the same elastic band that we use in the Army's single-point weapon holder for the AK5. The belt is cut to a fitting length in the end that is fastened in the buckle, and the edge is burnt to seal it and prevent fraying. The buckle is easily fitted and removed. A tip is to remove only the buckle and keep the strap in the pants, when passing through security at airports.- Material: Polypropylene tape
- Weight: 90 g
- Dimensions: The belt is 128 cm long.
- Width of the band 40 mm.
-
An equipment belt system with an inner and an outer belt. The 38 mm wide inner belt is carried in the trousers and the outer 38 mm wide belt is attached on the inner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
A well designed belt to improve your comfort when you carry a normal loadWeight: 250 g Fits: All pouches and holders Features:-
Plastic reinforced
-
One belt construction
-
3 point security buckle, prevents unwanted opening
The belt fits the following waist measurements:Small: 75-103 cmMedium: 85-113 cmLarge: 95-123 cmXLarge: 105-133 cm -
-
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
-
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
Weight: 200 g Dimensions: L= 17 & W= 17 Fits on it: All types of pouches Fits on: Trouser belts and equipment belts Features:A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg-
It fits securely on your belt. Double layers of modular webbing where pouches can be securely attached
-
The leg attachment plate is soft and can hardly be felt when worn
-
It weighs only 200 g
-
The leg straps are elastic to sit tight and comfortably
-
It is suitable for most pouches and holders in our system
-
It does not soak up water and will not be heavier when wet
-
-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included. -
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g -
A safe, easy, smooth and breathable leg mounting plate that is easy to use, attach and remove from the leg. It fits securely to your belt. A firm and ventilated place on your leg for one to four pouches. Mesh, perforated plastic sheet and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure keep the leg plate on your leg. The quick release with swivel function attaches the leg plate to your belt. The leg plate is soft and barely noticeable when wearing. The leg straps are elastic so that they are tight and comfortable. It is suitable for most pockets and holders in our system. It does not absorb water and does not gain weight when wet. One size fits all. Fits: Pistol holster and all types of pouches Beware: Belts and equipment belts -
Not in stock - on order
A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg It fits well on your belt. A firm and ventilated spot on your leg for one to four pouches. Mesh, perforated plastic film and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure attach the leg plate to your leg. Quick release buckle with swivel function attaches the leg plate to your belt. The leg attachment plate is soft and barely palpable while wearing. The leg straps are elastic to sit tight and comfortable. It is suitable for most pouches and holders in our system. It does not absorb water and does not gain heavier when wet. One size fits everyone. Fits: Pistol holster and all kinds of pouches Beware: Belts and equipment belts Weight: 300g -
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
Not in stock - on order
Features:- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
Not in stock - on order
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Not in stock - on order
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 2 x 30 round 5,56 magazines
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments.Low cut front for fast access. Large flap for dirt protection. Inside elastic band to secure one magazine. Eyelet in the bottom to let water out.Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
Not in stock - on order
A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g -
A band with a good and secure hook to keep your keys at hand any where on your belt or equipment vest * One hand open hook, to make it easy to get the keys * Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt- Measurements: L== 12, W= 2,5 & D= 2
- Weight: 30 g
-
This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment -
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:A simple glove keeper to carry gloves on the belt-
Fits most gloves
-
3 press button adjustment for different sized gloves
-
Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
-
Light weight
-
-
Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:An elastic glove keeper to carry gloves on the belt-
Fits most gloves
-
Threads onto the equipment belt
-
Velcro closure
-
Light weight
-
-
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
Weight: 50 g Dimensions: L= 13, W= 7 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a bunch of keys and keeps them from rattling-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 50 g Dimensions: L= 14, W= 8 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a large bunch of keys and keeps them from rattling-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Not in stock - on order
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment
