• Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions.
  • Not in stock - on order
    Border controls A classic from 1989, known in Finnish as the Rajapartio, originally designed for the Finnish border guard. An internal tubular aluminium frame helps to carry unwieldy and heavy loads. What is special is that the Rajapartio backpack has attachment points for a rifle on the outside. Originally designed to carry an assault rifle, the attachment points can also be used very well to attach, for example, a camera tripod or other long special supplies. Compartments The upper main compartment (dimensions approximately 45 x 35 x 22 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a large flap that is secured with straps. The generous length of the straps offers plenty of space under the flap to overpack. In the flap is a large, open pouch. When the valve is closed, the opening of the bag is facing upwards and closes so that the contents do not fall. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a water bag or other flat stuff. The lower compartment of the bag (dimensions about 15 x 35 x 20 cm) is closed with a two-way zipper and fastened with the same straps used to close the flap of the backpack itself. The side compartments (dimensions approximately 30 x 15 x 6 cm) are sealed with waterproof protective collars and covered with flaps that can be secured with straps. The side pocket on the left also has a vertical zipper which makes the contents of the box quickly accessible. OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find fastening loops to carry a rifle. The loops are also equally suitable for carrying other exceptionally long devices. The load is secured by tightening a belt that encloses the entire backpack. There are attachment points for detachable straps on top of the flap. Large essentials that otherwise do not fit in the backpack can be fastened on top of the flap. The side compartment on the right is tunnel-shaped and there is a mounting point above for a detachable belt. For example, it can easily hold an axe. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The buckle of the hip belt can be detached very quickly with one hand. A very valuable function in a possible emergency. With the support handle on the top, the backpack is also easy to carry by hand. The back is reinforced with an internal, square tube frame made of DUR aluminum. This lightweight frame keeps the backpack upright and is comfortable to carry, even with a slightly heavier load. The support frame can also be removed from the backpack if desired. TECHNICAL SPECIFICATIONS: External dimensions: height 65 cm, width 50 cm, depth 25 cm. Content: approximately 60 l. Weight: about 2.00 kg. Materiaal: 1000D Cordura Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 5-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland.
  • Weight: 1,2 kg Dimensions: 54 x 34 x 11 cm Fits: Cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or inside the specialist backpack medium/40L Features:
    An insert for the cameras, video recorders and other optical or sensitive equipment that can be carried on its own or in the Specialist Backpack-medium
    • Removable walls that can be configured to suit your equipment
    • Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside
    • The outside has a zipped compartment for papers and pens and can be used as a "table" in a surveillance operation
    • The flap can be removed and attached to the Specialist Backpack-medium for easier access
    • 6 zipped compartments for memory cards, cleaning equipment etc are placed on the inside of the flap
    • Padded shoulder strap with snap hooks
    • 2 handles
  • MMPS Vulcan IV 100l backpack: With the MMPS system, Berghaus brings a line of backpacks and accessories that fit together perfectly. This Vulcan backpack has a spacious capacity and is equipped with an aluminum support frame with a perfect weight distribution. Made of very sturdy reinforced nylon for maximum durability. A serious expedition backpack for serious bushcraft enthusiasts, survivalists, and wilderness travelers. The Berghaus backpacks are praised for their great wearing comfort, spacious volume, solidity and flexibility. Properties: This backpack has a generous capacity of 100 liters, divided over the main compartment of 80 liters and 2 side pockets of 10 liters each. Both side pockets are removable and can be linked together to form a handy compact daypack.
    • Cyclops II aluminum frame carrying system - Very comfortable even under heavy loads.
    • Top straps
    • Reinforced pull loops at the front and rear
    • 2 removable MMPS side pockets, can be combined into a daypack.
    • Compression tires on side and bottom
    • Attachment for an axe
    • Ski attachments on the side pockets

    Specifications

    • Capacity (L): 100
    • Weight (g): 2900
    • Height (cm): 72
    • Width(cm): 57
    • Depth (cm): 28
    • Material: Nylon
    • Color: Cedar
    • Backpack Opening: Toploader
    • Extra info / accessories: MMPS system
    • Adjustable carrying system: No, choice of 3 sizes
    MMPS - Multi Mission Pack System Berghaus' latest invention in the field of backpacks is the MMPS system. Developed in consultation with experts from the field, the Vulcan and Crusader backpacks were developed along with a number of useful extensions. For example, the Multi Mission Pack System (or MMPS) offers great flexibility and choice. The system makes it possible to adapt your backpack to the wishes you have for your trip. For example, it is possible to put together a backpack from 10 to 120 liters! But there are also a number of useful accessories to connect with all models of the MMPS system, such as a hydration pack. To explain how the MMPS system works, we would like to give you an example of a number of possible combinations with this backpack! By default with this model you have:
    • a daypack of 20 liters (the 2 side pockets together)
    • a larger backpack of 80 liters
    • or a 100 liter backpack (2 side pockets + the backpack itself)
    If you buy an MMPS Organiser Pocket, you suddenly have a handy side pocket where you can, for example, store your first aid equipment, navigation or camera and take it loose as a daypack. If you prefer more flexible storage space: choose the MMPS Large Side Pockets of 15 liters each, (can be combined into a daypack of 30 liters) or opt for extra standard MMPS Side Pockets of 10 liters each. These can be linked to this daypack. The MMPS system becomes completely flexible if you purchase an MMPS Centurio daypack of 30 or 45 liters. With 2 backpacks you already have a complete line that is suitable for every situation! For example: if you buy an MMPS Vulcan (80+20ltr) and a Centurio 45ltr, and you choose a set of MMPS Large Side Pockets of 15 liters each, then with 2 backpacks at once you have the following choices in terms of content:
    • 20 liter day backpack (the 2 side pockets)
    • 30 liter day backpack (the 2 Large side pockets combined)
    • 45 liter day backpack (Centurio 45 liters)
    • 65 liter backpack (the Centurio 45 + the side pockets of the Vulcan)
    • 70 liter backpack (the Centurio 45 + the 2 large side pockets)
    • 80 liter backpack (Vulcan)
    • 100 liter backpack (Vulcan + side pockets)
    This just indicates how you can vary with content. Because the entire system is interchangeable, the combination possibilities are almost endless. So you have a choice for more or less content and can add various useful extra options. In short: choose the Berghaus MMPS system and you have a durable, comfortable, and practical backpack for every possible trip you can think of! Available in 4 sizes! Berghaus chooses to adapt the backpacks to the body length of the wearer, instead of offering an adjustable system. This has the great advantage that the backpack is more stable and comfortable! So choose the right size to match your back and /or body height!
    Back length Body length
    Size 1 153 - 165 cm
    Size 2 38-43 cm 160 - 173 cm
    Size 3 43-48 cm 170 - 183 cm
    Size 4 48-54 cm 183 - 198 cm
  • Weight: 3300 g Dimensions: W=25, L=50 & H=35 cm Volume: 45L Fits inside: Most things, CSI equipment, Technical equipment, Medical equipment or all the equipment an investigator needs to carry, including ballistic vest. Fits on: Can be carried in the hand, over the shoulder or on your back. Features:
    The bag you use to keep all your tools in a good order, ready to use directly.
    • One large compartment with Velcro stripes to attach moveable walls.
    • One large top compartment with elastic bands.
    • Two side pockets with inside compartments that can be removed or carried on a belt.
    • One large front pocket with inside compartments that can be removed or carried on a belt.
    • Holder for the outside pockets on the top of the bag.
    • Padded shoulder straps that can be used to carry the bag as a backpack or as a shoulder bag.
    • Removable walls that can be configured to suit your equipment.
    • Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside.
    • Padded handles.
    • Light colored inside to make it easier to find what is in the bag.
    • Velcro stripes inside the bag and flap so you can attach our insert pouches.
    • Velcro patches on the outside for your unit and personal patches.
  • A slim backpack with a smart volume for lighter missions, or use in urbanized areas. The Front Access (FA) function offers the possibility to quickly grab equipment. Loops inside the back panel can optionally be used to create an MMPS Radio Pad, keeping the radio nicely stored against the inside of the backpack. Antennas, cables, etc. can be fed through openings on the top of the backpack. Features
    • Cyclops II back system
    • Comes without side pockets.
    • Compatible with drinking system
    • Ski attachment points on backpack body
    • Hip belt is attracted by two belts in the forward direction
    • 38 mm wide straps on luggage lifters and shoulder harness
    • Front access (FA)
    • Hidden mesh pocket in the front access panel to store a helmet or jacket etc. on the outside
    • 4 loops on the inside of the back panel to attach MMPS radio pad.
    MMPS - Multi Mission Pack System Berghaus' latest invention in the field of backpacks is the MMPS system. Developed in consultation with experts from the field, the Vulcan and Crusader backpacks were developed along with a number of useful extensions. For example, the Multi Mission Pack System (or MMPS) offers great flexibility and choice. The system makes it possible to adapt your backpack to the wishes you have for your trip. For example, it is possible to put together a backpack from 10 to 120 liters! But there are also a number of useful accessories to connect with all models of the MMPS system, such as a hydration pack. Available in 4 sizes Berghaus chooses to adapt the backpacks to the body length of the wearer, instead of offering an adjustable system. This has the great advantage that the backpack is more stable and comfortable! So choose the right size to match your back and /or body height!
    Back length Body length
    Size 1 153 - 165 cm
    Size 2 38-43 cm 160 - 173 cm
    Size 3 43-48 cm 170 - 183 cm
    Size 4 48-54 cm 183 - 198 cm
    Compatible accessories
    • MMPS Bags II
    • MMPS Large Bags II
    • MMPS Organiser Pocket II
    • MMPS Hydration Pocket II
    • MMPS Utility Bag
    • MMPS Molle Pad
    • MMPS Radio Pad
    • Rain cover 60-120L IR
    Attention: Side pockets on the picture not included !  
  • Not in stock - on order

    BACKPACK 339

    The cave-like, easy-to-pack bag and the wearing comfort of an external steel frame make the 339 a great choice for longer trips. A classic model from the 1950s, only the materials have been renewed over the years but the design has remained the same. Compartments The main compartment is closed by tightening the opening with drawstring which is covered with a flap that can be fastened with straps. The straps are long enough to, for example, attach a coiled sleeping mat or blanket under the flap. If necessary, additional detachable tyres can be used to extend the tyres. The contents of the bag can also be accessed quickly via the small side zipper on the right side of the opening. Special is that on the sides of the bag there are strings that can be used to tighten it to make the bag firm with less stuff in it, the adjustment range is about 10 cm. Conveniently, you can pack extra supplies behind the side cords, for example a camping axe. The side pockets are ideal for packing large thermos bottles and other cumbersome, long necessities. You can put lots of small necessities in the generous outdoor compartment for quick and easy access. SUPPORT SYSTEM The frame of the support device is the steel tube frame of the 339. The lower part of the frame is curved and forms a base on which the backpack can also be placed safely on sharp stony ground. The supporting carrying system, similar to backpacks with external frame, ensures comfort. The back length is adjustable steplessly for users of different lengths. Your upper back is against stretched mesh and your lower back in turn against a belt saddle: these prevent the bag itself from largely hitting your back, which makes for less sweaty conditions. The shoulder straps are wider than normal and padded, a chest strap with buckle gives extra support. The support point of the shoulder straps is located at the top of the frame. It is possible to adjust the center of gravity of the backpack even while walking by tightening and loosening the adjusting straps of the shoulder straps. The operating principle is about the same as with the supporting support systems of external frame backpacks. TECHNICAL SPECIFICATIONS: External dimensions: height 50 cm, width 45 cm, depth 25-35 cm. Content: about 55-65 l. Weight: approximately 1.90 kg. (Weight frame 650 g) Material: cotton treated with paraffin, polyamide band. Frame: steel tube. Colour: olive green with black buckles. WARRANTY AND WARRANTY: The product has a 5-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
  • Not in stock - on order

    5.11 RUSH 72 Backpack

    184,90249,90
    The RUSH72 ™ is designed as a 72-hour bag with full functionality that provides plenty of room for equipment and accessories, while remaining robust and reliable enough for extended excursions or tactical deployments. Compatible with 5.11® Tier system and the Rush Tier Rifle Sleeve, the package offers unparalleled storage capacity, a wraparound MOLLE and SlickStick compatible web platform, adjustable shoulder and chest straps, a 60-oz. hydration bag and durable, water-resistant construction. It's a backpack built to be prepared for anything. Buy the Rush collection. Dimensions Main compartment - 23 "H x 13.5" L x 8.5" Front compartment - 15.5" x 11.5" x 2 " Hydration bag -21 "x 13.5" Left and right side pockets - 42.5 x 15 x 1.75" Total capacity - 3342 cubic inches / 55 liters Weight - 5.5 pounds DETAILS FEATURES Ideal for recreational use or as an operational bug-out bag Compatible with 5.11® Tier system Double zipper front and main compartments with preformed hand handles Multiple integrated storage compartments Made of very strong, water-repellent 1050D nylon (MultiCam®: 1000D nylon) Management bag to store maps, pens and documents Fleece-lined sunglasses bag Internal hydration compartment with hangers and toggles Cinch waistband and double compression belts Adjustable shoulder straps with double-density closed cell structure Contour bracket system with handle Robust, self-healing YKK® zipper Integrated drainage throughput 5.11's signature Centerline ™ design Imported Personalize your bag with purpose-built pouches
    This article was replaced by the 5.11 Tactical Rush 72 2.0 version. Discover it here.
  • KEIKKA 80L

    The size of our Keikka duffel bags, capacity 80 liters. Designed as a multifunctional, user-customizable bag for everyday use, work, travel, sports and virtually anything but walking. Full range of carrying options: handles, handles, shoulder strap and fastening points for a padded backpack harness. Compatibility with numerous Velcro accessories offers extra flexible internal organization. This bag is built with materials and methods of military quality and is made to withstand everything you need. Coming in October 2020! KEY FEATURES Content 80 l Handles wrap around the bottom Handles at both ends Detachable shoulder strap Attachment points for optional backpack harness Main compartment with zippered lid Two compression straps with G-hook over the lid of the zipper Two internal mesh compartments Side compartment with zipper and versatile internal organization Two flat side pockets with Velcro closure Loop for accessories with hook on the inside of the lid and side pocket Loop for IDs and side and end patches Removable/replaceable filling on the inside of the lid and bottom 5-year warranty on material and craftsmanship TECHNICAL SPECIFICATIONS Weight: 1.88 kg Dimensions: 35 x 30 x 80 cm (B x H x L) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Buckles: steel Filling: foam with closed cells DETAILED DESCRIPTION The main compartment measures 35 x 30 x 75 cm and is accessible via a large zipper. The inside of the lid is equipped with strips loop for attaching accessories with a hook back. The main compartment is a hollow space with two mesh pockets, one at each end, to help organize smaller items. Two steel compression straps with G-hook help relieve pressure on the zipper when this large bag is fully packed. The external side compartment measures 35 x 23 x 5 cm and is designed for quick access and organization of smaller items and A4 documents. The back wall features two flat mesh pouches and a D-ring and two webbing tabs to secure valuables with a teat cord or buckles. The inside of the front wall is equipped with a loop for attachment of accessories with a hook back. The flat external pouches with Velcro closure are 24 x 20 cm in size and fit on A5 documents and similar smaller objects. Two 10 x 15 cm loop fields on the side and end of the bag accept most name bands and a number of other identification data. Each D-ring can also be used to confirm name tags. We have put extra energy into providing the best possible carrying experience. Due to the length of the carrying brackets, the bag remains well at a comfortable carrying height and a good control is possible. Each end is equipped with a handle for comfortable lifting during transport. Six steel D-rings are used to attach the included adjustable shoulder strap, which offer different orientations to suit your personal taste. The D-rings are also the fastening points for the optional padded shoulder straps. MODULAR AND CUSTOMIZABLE The loop strips in the main compartment and side compartment cover are suitable for various hook-to-loop fastenable accessories, pockets and organizers. This allows you to customize your bag to your preferences, or build it into a specialized toolbox for whatever work you need it. The foam filling with closed cells on the inside of the zippered lid and the bottom of the bag can be easily removed, replaced or reinforced. This allows the end user to easily adjust the bag with extra padding or plastic inserts if that extra level of protection or padding is required. The Keikka series bags can use an optional (separately available), padded clickable backpack harness. While carrying the backpack, the foam filling with closed cells on the inside of the lid provides a basic level of comfort against your back, even if you carry annoying mess in the bag. When a backpack with a bag like this should be as uncomfortable as possible, let's face it - this will never be as comfortable as a real backpack. Instead of building our bags with unergonomic, too long handles that also serve as shoulder straps, we've decided to make this a separate option for those who really need it, so we can build each carrying option in the right way for the intended feature. MILITARY GRADE MATERIALS AND CONSTRUCTION The bags from the Keikka series are made to last. The carrier handles are made of a single length of 50 mm wide band that wraps around the bottom of the bag, sandwiched between two layers of 1000D Cordura. Stress points are reinforced with double stitching and seams are finished with binding tape to prevent fraying. All carrier buckps are made of steel and are likely to last longer than the rest of the bag. Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defence and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The webbing and edge band we use are, again according to the FDF specifications, strong polyester band in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as they should be, as the same materials are used in official military equipment. PROPER RESPONSIBLE PRODUCTION We manufacture the vast majority of our products ourselves in our own factories in Karstula, Finland and Tartu, Estonia. Product development and special production phases such as laser cutting and metalworking take place in our main facility in Finland, the cutting and sewing of textiles takes place both in Finland and in Estonia. Here at Savotta we do not dream of low labour costs, but we work constantly hard to keep the production in our own hands! LEARN FINNISH WITH SAVOTTA In Finland we have something like "keikka", like at a gig (concert), business trip or burglary. For a boulder case you need a bag, a bag of the right size with handles and shoulder strap, preferably with some basic pockets for organization. And it must be strong enough to carry a heavy burden. "Keikkalaukku" ("laukku" = bag) has for decades established itself as the general Finnish term for duffel bags, bags for equipment, you know THAT a certain type of good heavy transport bags. We've been making heavy backpacks since before most of our current employees were born, it's about time we started making a real series of duffel bags! Now you're so much smarter. Well done, Finnish is a damn difficult language to learn!
  • Beware: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. Can be attached to the tactical vest Features: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment The backpack can be custom-made by the user for radio or medical equipment. Ventilated back with plastic plate and aluminum support at back to make it sturdy but customizable Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone The shoulder pads can be stored behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap A ballistic plate or drinking bag can be transported in the rear compartment The bag is made of wear-resistant coated polyamide fabric and sturdy zippers Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened Push button in the main compartment ensures that the zipper does not open too much Four long compression straps on the side are sewn to the backpack The loose ends of the side compression straps are rolled up and fastened with Velcro The bag has two carrying handles, one on the side and one on the top Main compartment has two inner compartments with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment The outer compartments have a zipper and each has an elastic mesh pocket with zipper on the inside Modular webbing to mount bags/bags are placed on the outside of the outer pockets An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open A man pack radio can be secured with two straps close to your back for the best weight distribution and balance (straps not included) Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Access holes for radio or computer cables are placed on each side of the backpack The cable for the radio microphone is inserted through the access hole into the lower part of the backpack and then the microphone is attached to the shoulder pad Owner identification can be written on the Velcro The backpack is suitable for carry-on dimensions The backpack can be attached to the back/top of our modular equipment vest -10 and plate carriers. MOLLE tires on the sides. Capacity = 30 litres. 22L in the main compartment, 6L in the lower outer compartment and 2L in the upper outer compartment.
  • Not in stock - on order
    With a capacity of 60 liters, the RUSH100 is the largest and most versatile insert in the 5.11 Tactical RUSH series. The robust construction and its modularity is the ideal answer to rapidly changing situations. The ingenious organization makes the RUSH100 a functional backpack. It offers a large main compartment with 270°zip, a bottom compartment, a front compartment and two detachable side pockets. On the outside, it has numerous MOLLE straps and compression/fastening straps for attaching extra equipment and for firmly compressing the backpack. The 500D offers high tensile strength and tear resistance, which are crucial for robust, targeted use. The comfortable and adjustable carrying system is specially designed for heavy loads and long distances. The flat aluminium frame provides stiffness, ergonomics and load transfer, while the horizontal fibreglass rods provide torsional stiffness. The padded shoulder straps are adjustable in height and the seat can be adjusted perfectly with the help of the load control straps and the chest strap. The ergonomically shaped lap belt ensures optimal grip without slipping away and is tightened with a deflected lap belt. The shoulder strap, chest strap and lap belt are completely removable, transforming the RUSH100 from backpack to space-saving insert bag. Material Soil material: 1050D nylon; Main material: 500D nylon; YKK® zippers; Duraflex® hardware Reviews Details:
    • Height adjustable and ergonomically shaped shoulder straps with fast-clasp.
    • Stepless adjustable straps.
    • Detachable chest strap.
    • Removable, ergonomically shaped lap belt with deflected lap belt.
    • Internal frame of aluminium and fiberglass for load transfer.
    • Reinforced handle.
    • Large main compartment with 270° zipper and preparation for drinking system.
    • Lid compartment with fleece-lined glasses/ smartphone compartment.
    • Admin front pocket with 2 zip pockets, 3 insert pockets and key holder.
    • Spacious bottom compartment with 2-way zipper.
    • 2 removable side pockets.
    • 2 compression straps with Duraflex® Autolock buckles.
    • 2 fastening straps with ladder buckle on the floor.
    • Allround MOLLE band
    • Velcro for ID patch and name strips.
    • Water drain on the floor.
    • Lap belt sizes: S / M 76 - 91 cm; L / XL = 89-114 cm.
    • Capacity: 66 litres.
    • Dimensions: ong. 72 x 28 x 26 cm.
    • Weight: about 2580 grams.
  • Not in stock - on order
    The 5.11 Tactical's Tac Operator ALS is the tactical cousin of the Operator ALS Medic backpack in muted color and without reflective elements. With the included gear set, four Easy-Vis Med bags with color coding and an additional mounting surface configured for both internal and external assembly of the gear set, the Tac Operator provides plenty of room for additional equipment. A pair of long zippered inner pockets and a two-way pocket keep your gear strategically organized. This also applies to the special laptop/drinking compartment. Material Material 1: 1050 denier polyester; Material 2: 1000 denier polyester; Details:
    • Gear set compatible.
    • Ergonomically shaped shoulder straps with fast fastenings.
    • Height adjustable chest strap with fast-circuiting.
    • Pelvic girdle with padded hip fins with elastic mesh-material zip pockets.
    • Padded back plate.
    • Sturdy handle made of aluminium.
    • Fully open main compartment with No.10 YKK zippers.
    • Main compartment with 4 fixed zippered pockets and 4 removable Easy-Vis Med compartments (17.78 x 16.51 x 8.89 cm) with transparent windows.
    • Lid compartment with access inside and out.
    • Lined rear compartment with container for drinking water and hose/cable passage.
    • 2 flat zip pockets with Velcro on the front of elastic material.
    • Compression straps on the side.
    • MOLLE Velcro surfaces on the sides.
    • Velcro surface on the blanket for ID patches.
    • 5.11 Signature Center Line design.
    • Includes removable double-inset gear set.
    • Capacity: 35 litres.
    • Dimensions: ong. 51 x 29 x 22 cm.
    • Weight: about 1135 grams.
  • Not in stock - on order
    The 5.11 Tactical AMP72 ™ is designed for durability, flexibility and comfort. Compact and efficient, thanks to its innovative 5.11 HEXGRID® support system and Gear Set ™ compatibility, it offers many options for assembling or fixing equipment. The removable HEXGRID® mounting platform is MOLLE-compatible and offers vertical, horizontal and diagonal assembly capabilities thanks to its special honeycomb-like structure. The HEXGRID® panel is removable and can be replaced with 5.11 Gear Set ™-compatible equipment. The AMP72 ™ has a capacity of 32 liters, which is spread over a padded laptop/drinking tank rear compartment, a large main compartment and two flat front compartments. The main compartment, which can be fully opened with a robust No.10 YKK® zipper with 4 zippers, has a back panel lined with Velcro for attaching bags and velcro equipment. The flat CCW-compatible compartment with its internal Velcro and attachment loop allows you to attach holsters and concealed pistols. Material Main material: 1050 denier polyester; Floor: 500 denier polyester; HEXGRID®: 420D / 1000D Cordura® nylon; YKK® zippers; Dura-Flex® hardware. Details:
    • Ergonomically shaped and padded shoulder straps with fasteners.
    • Height adjustable and removable chest strap with fast-circuiting.
    • Lap belt with padded hip fins and fast-circuiting.
    • Thermoformed back filling.
    • Stable wristband.
    • Rear compartment for laptop / hydration bladder and hydration tube openings.
    • Full-time major with No.10 YKK® 2-way zipper with Velcro rear panel and 2 zippered mesh pockets.
    • Large padded intermediate compartment with loop attachment.
    • Compression straps on the side.
    • 2 zip pockets in front.
    • Flat CCW-compatible front pocket with Velcro closure.
    • Removable HEXGRID® mounting panel.
    • Gear Set ™ compatible.
    • Velcro surface for ID patches.
    • Capacity: 32 litres.
    • Dimensions: ong. 61 x 28 x 23 cm.
    • Weight: about 1660 grams. Please note: The backpack comes with no contents! The images show only one application example.
  • Not in stock - on order
    A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.
    • Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
    • Content: 50L.
    • Dimensions: B = 34, H = 62, D = 22 cm.
    • Weight: 1850 grams.
    This item has been replaced by the upgraded version Snigel 50L mission backpack 2.0 -- > https://shop.afullmetaljacket.com/product/snigel-50l-mission-backpack-2-0/
  • KEIKKA 50L

    The medium variant of our Keikka duffel bags, capacity 50 litres. Designed as a multifunctional, user-customizable bag for everyday use, work, travel, sports and virtually anything but walking. Full range of carrying options: handles, handles, shoulder strap and fastening points for a padded backpack harness. Compatibility with numerous Velcro accessories offers extra flexible internal organization. This bag is built with materials and methods of military quality and is made to withstand everything you need. Coming in October 2020! KEY FEATURES Content 50 l Handles wrap around the bottom Handles at both ends Detachable shoulder strap Attachment points for optional backpack harness Main compartment with zippered lid Two internal mesh compartments Side compartment with zipper and versatile internal organization Two flat side pockets with Velcro closure Loop for accessories with hook on the inside of the lid and side pocket Loop for IDs and side and end patches Removable/replaceable filling on the inside of the lid and bottom 5-year warranty on material and craftsmanship TECHNICAL SPECIFICATIONS Weight: 1.42 kg Dimensions: 35 x 25 x 55 cm (B x H x L) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Buckles: steel Filling: foam with closed cells DETAILED DESCRIPTION The main compartment measures 35 x 25 x 50 cm and is accessible via a large zipper. The inside of the lid is equipped with strips loop for attaching accessories with a hook back. The main compartment is a hollow space with two mesh pockets, one at each end, to help organize smaller items. The external side compartment measures 35 x 23 x 5 cm and is designed for quick access and organization of smaller items and A4 documents. The back wall features two flat mesh pouches and a D-ring and two webbing tabs to secure valuables with a teat cord or buckles. The inside of the front wall is equipped with a loop for attachment of accessories with a hook back. The flat external pouches with Velcro closure are 24 x 20 cm in size and fit on A5 documents and similar smaller objects. Two 10 x 15 cm loop fields on the side and end of the bag accept most name bands and a number of other identification data. Each D-ring can also be used to confirm name tags. We have put extra energy into providing the best possible carrying experience. Due to the length of the carrying brackets, the bag remains well at a comfortable carrying height and a good control is possible. Each end is equipped with a handle for comfortable lifting during transport. Six steel D-rings are used to attach the included adjustable shoulder strap, which offer different orientations to suit your personal taste. The D-rings are also the fastening points for the optional padded shoulder straps. MODULAR AND CUSTOMIZABLE The loop strips in the main compartment and side compartment cover are suitable for various hook-to-loop fastenable accessories, pockets and organizers. This allows you to customize your bag to your preferences, or build it into a specialized toolbox for whatever work you need it. The foam filling with closed cells on the inside of the zippered lid and the bottom of the bag can be easily removed, replaced or reinforced. This allows the end user to easily adjust the bag with extra padding or plastic inserts if that extra level of protection or padding is required. The Keikka series bags can use an optional (separately available), padded clickable backpack harness. While carrying the backpack, the foam filling with closed cells on the inside of the lid provides a basic level of comfort against your back, even if you carry annoying mess in the bag. When a backpack with a bag like this should be as uncomfortable as possible, let's face it - this will never be as comfortable as a real backpack. Instead of building our bags with unergonomic, too long handles that also serve as shoulder straps, we've decided to make this a separate option for those who really need it, so we can build each carrying option in the right way for the intended feature. MILITARY GRADE MATERIALS AND CONSTRUCTION The bags from the Keikka series are made to last. The carrier handles are made of a single length of 50 mm wide band that wraps around the bottom of the bag, sandwiched between two layers of 1000D Cordura. Stress points are reinforced with double stitching and seams are finished with binding tape to prevent fraying. All carrier buckps are made of steel and are likely to last longer than the rest of the bag. Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defence and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The webbing and edge band we use are, again according to the FDF specifications, strong polyester band in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as they should be, as the same materials are used in official military equipment. PROPER RESPONSIBLE PRODUCTION We manufacture the vast majority of our products ourselves in our own factories in Karstula, Finland and Tartu, Estonia. Product development and special production phases such as laser cutting and metalworking take place in our main facility in Finland, the cutting and sewing of textiles takes place both in Finland and in Estonia. Here at Savotta we do not dream of low labour costs, but we work constantly hard to keep the production in our own hands! LEARN FINNISH WITH SAVOTTA In Finland we have something like "keikka", like at a gig (concert), business trip or burglary. For a boulder case you need a bag, a bag of the right size with handles and shoulder strap, preferably with some basic pockets for organization. And it must be strong enough to carry a heavy burden. "Keikkalaukku" ("laukku" = bag) has for decades established itself as the general Finnish term for duffel bags, bags for equipment, you know THAT a certain type of good heavy transport bags. We've been making heavy backpacks since before most of our current employees were born, it's about time we started making a real series of duffel bags! Now you're so much smarter. Well done, Finnish is a damn difficult language to learn!
  • Savotta JÄÄKÄRI M

    209,90229,00

    JÄÄKÄRI M

    The medium day backpack of the Jääkäri family, capacity approximately 30 liters. The Jääkäri M is an improved model of the Light Border Patrol backpack, originally designed for the Finnish Border Patrol. The sleek design offers unhindered movement in tight spaces and difficult terrain. The PALS fastener offers many options for fitting extra pockets and equipment on the outside of the backpack. An internal plastic frame blade gives the backpack stiffness, while the compression straps help you tie your load up to a tight package. As part of the Border Guard heritage, the shoulder straps, the lap belt and the back lining are designed to be more comfortable to wear than most backpacks of this size. KEY FEATURES Content 30 l Padded shoulder straps with chest strap Padded hip strap Main compartment with floating lid and side zip Zipper pocket on the inside of the lid Internal hydration compartment Compression straps on the side Internal plastic frame sheet PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag product TECHNICAL SPECIFICATIONS Weight: 1.75 kg Dimensions: 52 x 25 x 17 cm (H x B x D) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Frame plate: HDPE DETAILED DESCRIPTION A collar with drawstring covered with a floating lid closes the main compartment at the top. A full-length side zip provides quick access to smaller items stowed in the main compartment. A zippered pocket on the inside of the lid provides secure storage for your wallet, keys, travel documents and phone. The floating lid and compression straps on the side offer a wide range of adaptability to the backpack's capacity. Fasten it tightly or loosen it, depending on the load carried. The compression straps ensure that additional equipment can be attached to the outside of the backpack if necessary. External side pockets at the bottom can be used to provide tools, tripods etc. Secure to the sides of the backpack. A hydration compartment is attached to the inner back wall. Tube ports on both sides allow you to guide the drinks long from the left or right, while the other port remains free for other uses, such as antennas or cables. With PALS straps on the backpack's lap belt, sides and lid, you can attach extra bags and equipment. This system offers numerous options to customize the package to your specific needs. Not only for pouches, the PALS band can also be used for attaching utility straps, shock cord, carbine hooks etc. Four singelluses at the bottom can be used to attach utility straps. MILITARY GRADE MATERIALS Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defense and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The tires and edge tape we use are, again according to the FDF specifications, strong polyester bands in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as standard, as should be since the same materials are used in official military equipment. SUPPORT SYSTEM The Jääkäri M has an internal frame of plastic plate, giving it the necessary stiffness to stay upright when loaded with clumsy and bulky equipment. Both the shoulder harness and the lap belt are tightly filled with foam with closed cells. The shoulder harness is S-shaped and has a detachable chest strap. The forward-pulling lap belt is also easy to put on under load. The buckle on the side provides quick and easy opening when needed. The lap belt is equipped with an additional cushion for lower back support. CONNECTION OF FINNISH BORDER GUARD In the early 1990s, a compact Savotta walking backpack, simply called the "608", was chosen as the starting point for the design of a new day backpack for the Finnish Border Guard. This then changed to the 'Kevyt Rajapartio' or Lightweight Border Patrol backpack, a very modern backpack for its time: narrow design for mobility, side zipper, compression belts and rifle fastening. Most striking was a very sturdy carrying system and an aluminum reinforced frame - something you rarely see on packaging of its size. This venerable design was chosen in 2013 as the basis for the development of what would become the Jääkäri M, the first in the modern range of Savotta packs with a construction and functionality of military quality. This worked out very well and the Jääkäri M was followed by his siblings: the Jääkäri S, L and XL.

Title

Go to Top