• MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:
    • The perfect case to carry ammunition for the SAW/Minimi machine gun
    • For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
    • Also suitable for 7.62 coupled ammunition
    • Can be used for 2 Cal 50 warehouses
    • Webbing on both sides for attaching small bags
    • The pouch can be attached to the vest or worn in a shoulder strap (not included)
    Specifications:
    • Article number: 22-00511-09-000
    • EAN: 7332673301539
    • Weight: 300 grams
    • Dimensions: 18 x 19 x 8 cm
    • Category: Holders & bags
    • Color: Grey
  • The Warrior Assault System Triple 9mm Direct Action Mag Pouch can be used with or without the magazine protection, the internal plastic material combined with the elastic band on the side prevents the magazines from falling out. The magazine catcher can be opened with Velcro and Velcro. Suitable for calibers 9mm, .40 and .45 double row pistol magazines. Material
    • 100% polyamide (500D Cordura® Performance)
    • US MIL-Spec webbing (with a tear strength of 1200 pounds)
    • US MIL-Spec stitching, treated against mold.
    Specifications
    • magazine holders with Velcro closure, can be folded forward when not in use.
    • Elastic sides.
    • PALS mounting loops for MOLLE system (25 mm).
    • Water drainage eyes at the bottom.
    • Dimensions: approx. 12.5 x 2.5 x 11 cm.
    • Weight: approx. 150 g.
  • Not in stock - on order
    Extreme '' auxiliary kit to stop major bleeding for humans and dogs in case of severe cuts, such as an attack by a wild boar, ideal for all hunting and outdoor activities, fits AddOn/Molle system Drive immediately, but carefully, to the hospital or to the vet. This kit is extremely valuable if you are hunting wild boars, but on every occasion - hunting or trekking - this kit should be mandatory! For your dog or your own safety - buy him! Contents: gauze, plasters, scissors, (wet) wipes, safety pins, First Aid alu blanket, etc Extra content: 1 pair of rubber gloves, 5 vials of disinfectant, 10 large compresses, 2 self-adhesive bandages.
  • Not in stock - on order
    Black nylon handcuff holder for the handcuff pairs used in French units. It is adjustable in depth for maximum compatibility with other handcuffs and can be attached to soft loops as well as to the strap. Features
    • Universal handcuff holder made of 1000D Nylon
    • Valve closure with snaps
    • 2 closing heights depending on the type of handcuffs
    • Elastic side straps to adjust in depth
    • Soft microfibre interior
    • Fastening to soft loop
    • Fastening to strap up to 5 cm wide
    • * Specially developed for the Arktis patrol bulletproof vest
    Specifications
    • Length: 20 cm
    • Width: 11 cm
    • Height: 4 cm
    • Weight: 100 g
  • Not in stock - on order
    The latest addition to our popular DAKA line, the small Magpul DAKA Lite Pouch is designed to be lightweight and highly packable while retaining the strengths of our original DAKA pouches. Made from a lighter, more flexible nylon material, the DAKA Lite line is intended for use where you need flexibility and weight savings over a more structured storage solution. Designed to carry everything from electronics to emergency equipment, the small DAKA Lite Pouch is easy to pack into larger storage units such as your daypack, hunting bag or travel duffel. The versatile design makes the DAKA Lite Pouch perfect for backpacking, camping, biking, hunting, and lightweight vehicle organization. The RF welded seams of the 70D TPU-coated nylon keep the weight low without losing strength. The Magpul embossed injection molded zipper pull is easy to find and manipulate, and carabiner attachment points make securing the case simple and effective. The DAKA Lite Pouch is an essential piece of equipment when weight saving is important for your success. NEW, LIGHTER AND MORE FLEXIBLE STORAGE MATERIAL Lightweight and extremely packable Made of 70D TPU-coated nylon Strong RF welded construction that creates permanent, impermeable seals Technical specifications
    • Weight: 20 grams
    • Zipper length 6 in.
    • External height 6 in.
    • External width 9 in.
  • Savotta Side pouch 8L

    49,9059,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With an eight-liter capacity, this is clearly a larger side bag, which is perhaps best used on large and high backpacks of 60-100+ liters. Here are some examples of what will fit in such a bag:
    • A large tarp, hammock and accessories
    • A hammock and duvet
    • A lightweight puff jacket and pants or rain gear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook
    • A Jetboil cooker, a gas cartridge, water and lots of cooking utensils
    • More than 24 hours of rations and snacks
    • Almost a week's worth of spare underwear, interlayers and socks.
    Key features
    • Capacity approx. 8 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 270 g
    • Dimensions: 17 x 40 x 11 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Designed to attach to your vehicle's headrest or a MOLLE or web platform, the UCR IFAK Pouch of 5.11® allows you to keep 1-2 work tools or medical supplies within easy reach. The pouch has a drop-down zipper pocket with a light-colored interior for easy identification of the equipment, and bungee tie-downs for extra stability. It's nice to know that you have everything there. Ready to go. Dimensions
    • 7" H x 5" L x 3" W
    • 1050D Nylon |1050D
    • Quick pull drop front opening for access
    • Front laser cut MOLLE platform with loop
    • Bungee compression fastening system
    • Drain holes on bottom panel
    • Headrest vehicle mount
    • Removable compression tape
    *No content included!
  • 5.56 Triple Direct Action Mag Pouch from Invader Gear in Wolf Grey.
  • Rigid double magazine holder of Radar 1957 of injection molded polymer and Cordura® with a fixed belt loop. It accepts PA-type magazines with a double column and is adjustable vertically or horizontally. It has molded and spring-loaded retention and secure snap closures. Features
    • Injected polymer and Cordura® housing
    • Specific design for double-column warehouses
    • Cordura® vertical flaps
    • Safe directional snaps
    • Fixed vertical or horizontal belt loop
    • Accepts wide straps up to 5 cm
    • Horizontal slots for 4 cm bandwidth
    • Weight: 170 g
    • Dimensions: 12 x 16 x 5,5 cm
    • Example of compatibility with the following warehouses: PAMAS, SIG 2022, Glock 17, HK MP5, HK MP7 and USP.
    • RAD-4086-3816
  • Not in stock - on order
    A very light and tight belt with integrated compartments for secretly carrying equipment. Two layers of elastic keep your equipment safe and tight against the body. Stores communications equipment, baton, tear gas spray, pistol magazines, 5.56 magazines, a flashlight and other supplies for surveillance and security operations in 12 compartments. The bottom of each compartment can be opened with Velcro. Detachable plastic gun holster makes it easy to holster your gun. Velcro closed front. Adjustable elastic cord at the back. One size fits all Black only Weight: 400 grams Dimensions: 125 x 12 x 3 cm *No strap capacity included.
  • Not in stock - on order
    If your work or lifestyle is Grab-and-Go, then this LV8 shoulder bag is ready for a quick grip. The 8-liter volume offers all the features you need with an internal organizer, laser-cut MOLLE belts and storage compartments to keep everything organized. The CCW pocket has a full hook-and-loop panel and a detachable holster strap. The LV8's exterior features a padded zip pocket, a fleece-lined smartphone/device pocket, and the 840D nylon construction can withstand years of use. A padded back panel, a quick-release shoulder strap and a removable chest strap ensure all-day comfort. Features
    • Shoulder bag
    • Total capacity: 8 litres
    • Ambidextrous shoulder strap with quick release
    • Detachable chest strap and CAM buckle
    • CCW compartment with full hook-and-loop panel, detachable holster strap, accessible pull tabs (fits Glock 17)
    • Padded back panel with channel for flexible handcuffs
    • External nylon lined zipped pocket
    • External pocket with fleece lining for devices/media
    • Internal organs and pockets, padded bag with webbing retention
    • Laser cut MOLLE buckle
    • Lower straps
    • Retractable 5.11 logo labels for more discretion
    • 1 handle on top and 2 handles on the side
    • 5.11 Diagnostic Center Line™ design
    • 840D nylon
    • Dimensions: 21,59 x 35,56 x 10,16 cm
    • Weight: 1.18 kg
    * Secondary photos of details in other colors are not contractual.
  • Savotta Tourniquet Pouch

    25,9026,90
    Fits the most common tourniquets from SOFTT-W to CAT Gen 7. Vertical PALS and strap and horizontal strap attachment options. KEY FEATURES
    • Fits most tourniquets, including SOF, CAT Gen 7, SAM-XT
    • Flap with Velcro closure
    • Elastic compartment for slimmer and thicker tourniquets
    • Elastic pen/glow stick loops on the sides
    • Attachment system compatible with PALS and belt
    • One-Wrap for horizontal belt attachment
    • All color options offer good NIR performance (read more)
    • NSN: 6510-58-001-8496
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 65 g
    • Dimensions: 5 x 15 x 4 cm (W x L x D)
    • Strap: 100% polyester
  • A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES
    • Internal elastic compartments for lead weights
    • Designed for six weight discs of 45 x 60 x 5 mm
    • Can also carry weights of other shapes and sizes
    • Attaches to helmet rail with screws and loop
    • Upper fastening straps for our High cut helmet cover V1
    • External elastic loops for cord management etc.
    • Also functions as a holder for spectacle straps
    • 10 x 12 cm loop on the outside for patches
    • All color options offer good NIR performance (read more)
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 60 g
    • Fabric: 500D Cordura (100% polyamide)
    • Webbing: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 80 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 80 x 15 mm. Because the pocket is open on the sides, you can guide the elastic of your goggles through it and it will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. The included screw buckles allow you to attach the case very securely to the back of your helmet, so that it does not move when it is weighted. The fastening buckles work with Ops-Core, Galvion and similar rail screws. The upper attachment straps attach to the 25mm webbing on our High cut helmet cover V1. No weight discs included, these are sold separately.
  • Savotta Kukkaro hip pack

    66,4569,45
    Compact waist bag with versatile internal organization and external attachment points. Waist bags are already very versatile, but the Kukkaro is even more so thanks to the many ways you can customize it to suit your specific needs. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, tie-down loops and a loop surface for attaching organizers with hooks. The back wall has a large flat compartment for larger items. On top of the compartment is sewn a single row of 50 mm elastic webbing, which contains two smaller approx. 4 cm wide loops and a larger approx. 9 cm wide loop, suitable for small items such as multi-tools, lighters etc. The front wall has two small flat compartments with attachment loops at the top. An 18 x 10 cm loop area on the inside of the front makes it possible to attach all kinds of organisers with hooks, etc. A large, open flat pocket on the back of the backpack allows you to store the waist belt if needed and it can be used as a large belt loop if you want to carry the Kukkaro on a belt or the hip belt of a backpack. The PALS webbing on the side wings and bottom allows you to attach small pockets, elastic cords and accessories. The straps on the side wings can also be used to quickly attach the backpack to the compression straps on the side of a backpack using additional SR buckles or G-hooks. Such buckles or G-hooks are not included with the backpack. Learn Finnish with Savotta: "Kukkaro" is Finnish for a bag or pouch that is a type of handbag, but not a handbag, nor just any small bag. The free Finnish online dictionary www.sanakirja.org defines "kukkaro" as "a small, usually leather pouch or bag, in which one carries small necessities and accessories, such as money, tobacco, etc. By definition, such a small fanny pack is really the ultimate "kukkaro". KEY FEATURES
    • Capacity approx. 1.5 litres
    • 25 mm SR buckle strap (max. circumference approx. 145 cm) attached to stabilizing wingsFlat open pocket on the body side for storing the belt
    • Large main compartment with zipper
    • One large and two small flat inner compartments
    • One large and two small elastic loops for organization on the inside
    • Two attachment points on the inside for dummy cords and carabiners
    • 18 x 10 cm loop area on the inside for organizers with hooks
    • 1 x 2 PALS weaving straps on both side wings
    • 1 x 3 PALS weaving tapes at the bottom
    • 15 x 5 cm loop surface on the outside for patches and identifiers
    • Water drain grommets at the bottom
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 215 g
    • Dimensions: 20 x 12 x 5 cm (W x H x D)
    • Main fabric: 500D Cordura (100% Polyamide)
    • Strap: 100% polyester
  • Not in stock - on order
    Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg
  • This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment
  • Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:
    An elastic glove keeper to carry gloves on the belt
    • Fits most gloves
    • Threads onto the equipment belt
    • Velcro closure
    • Light weight
  • A small, lightweight, safe and flexible pouch for your first aid kit
    • The bag is closed with Velcro. Pull the strap to open the pouch (can be used with gloves).
    • You can attach the pouch to all our carriers. It can be attached with the flap up or down.
    • The bag does not absorb water and does not gain weight in rain
    • The eye in the bottom of the bag may oms water
    • The fastening system with snaps makes it possible to attach the pocket to any equipment vest or belt
    Fits: 1 field bandage, 1 turnstile and 1 elastic bandage or personal equipment Beware: Service belt, leg platform, equipment vest and belt *Medical equipment not included !
  • This insert fits in the Snigel Trauma Pouch -17 and facilitates keeping all contents in order. Three 5 cm wide elastic attachments, a net pocket and two plastic covers for e.g. trauma cards (TCCC) or instructions. By pulling the Velcro, the insert is detached in one operation and ready for use. Please note that medical equipment is sold separately.
  • Not in stock - on order
    Clawgear's nylon equipment is designed to increase the operator's performance and fightability. These products are optimized to be as versatile and lightweight as possible, the use of proprietary Tacticote and Tacticote Reinforced materials same time massively increases the durability and lifetime. The Low Profile Mag Pouch features instant access to the magazine and incredibly low weight. Elastic retention straps can be installed optionally if required for enhanced magazine retention (not included). Designed and prototyped in Austria, field tested worldwide, assembled in Poland from EU and US made military grade materials. Features - Tacticote laser cutted construction - Low profile and lightweight - MOLLE PALS compatible - Weighs just 29g Compatibility Fits most standard and compact pistol magazines with standard capacity. For example: Glock 17, 19, 22, 23, 31, 32, 37, 38, S&W M&P 9mm and .40, Springfield XD 9mm and .40, 1911 Government 9mm, .40 and .45, Berettta 92, 96, CZ 75, Walther P99, SigSauer P220, P226, P228, P229, H&K USP 9mm and .40, USP/Match Compact/P2000 9mm and .40, SFP9/P30 9mm and .40 and many. Tacticote Reinforced This laminated material has been developed to provide an incredibly strong and easy to process fabric for the production of outstandingly durable gear for law enforcement and military use. Due to its layered construction it has unique strength to weight characteristics.
  • Clawgear's nylon equipment is designed to improve the operator's performance and fighting. These products are optimized to be as versatile and light as possible, the use of patented Tacticoat and Tacticoat Reinforced materials at the same time greatly increases durability and longevity. The revolutionary backward valve system offers many advantages compared to conventional pouches with elastic retention. The natural reflexes are much better supported and give the operator faster access to the charger, while the flap does not interfere with other chargers. Designed and prototyped in Austria, tested worldwide in the field, assembled in Poland, EU-US materials of military quality. Features - Tacticoat laser cut construction - Low profile and lightweight - Backward flap for improved chargers retention and direct access - Adjustable retention - MOLLE PALS compatible - Weighs only 38 grams Compatibility Fits most standard and compact pistol warehouses with standard capacity. For example: Glock 17, 19, 22, 23, 31, 32, 37, 38, S&W M&P 9 mm and .40, Springfield XD 9 mm and .40, 1911 Government 9 mm,. 40 and. 45, Berettta 92, 96, CZ 75, Walther P99, SigSauer P220, P226, P228, P229, H&K USP 9 mm and .40, USP / Match Compact / P2000 9 mm and .40, SFP9 / P30 9 mm and. 40 and more. Tacticoat strengthened This laminated material has been developed to provide an incredibly strong and easy-to-process material for the production of extraordinarily durable equipment for law enforcement and military use. Due to its layered construction, it has unique strength and weight properties.
  • Warrior's famous Single Open D.A. 5.56 mm is now available with the addition of a 9 mm pistol magazine at the front. This "Kangaroo" bag can accommodate 5.56mm x 45mm M4-style metal and polymer warehouses. (NOT G36 warehouses). The main compartment is accessible via a bungee retension where the front gun warehouse is accessible via a Velcro closure. This has internal height adjustments to accommodate warehouses of different sizes. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.
  • Not in stock - on order
    Bag for 50 cartridges with adjustable belt. Details: Size: 18.5x21.5x9 Capacity: 50 cartridges. Design Beretta contest. Adjustable belt with buckle fastening. Elastic for 3 choke coils/cartridges. Uniform Pro Uniform Pro is a complete range of bags and suitcases that are extremely light and resilient, specially developed for shooting ranges.
    • Made from 100% polyester 500x300 denier water and scratch resistant.
    • High-density padding to perfectly stabilize the contents and protect the main parts of the gun.
    • Breathing against humidity.
    • Padded handle with Velcro and non-slip shoulder strap for easy transport
    • Two-way lockable zipper with easy-to-grab tractor.
    • Hang crochet.
  • Not in stock - on order
    The Mil-Tec Empty Shell Pouch is a modular universal case for empty magazines, shotgun shells or other utensils. Material 100% Polyester Details:
    • For empty magazines and devices.
    • Snow apron with elastic band and cord stopper.
    • Can be attached to belt or vest.
    • Two side pockets on the outside.
    • Outer compartment with Velcro closure and D-ring.
    • Inner pocket with Velcro closure.
    • Dimensions: ong. 14 x 7 x 20.5 cm.
    • Weight: about 170 grams.
  • Not in stock - on order
    MIL-TEC Multitarn® double pistol may pouch, perfectly suited for all your airsoft adventures. 100% polyester, coated with polyvinyl chloride Dimensions: 11 x 2 x 12 cm
    • molle mounting system
    • drain eye
    • Velcro closure
    • mounting height individually adjustable
  • Not in stock - on order
    The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system.
    • MODEL: 38
    • SKU: 1098798
    • PART:38-23PBL
    • OC-type: MK4 and similar
  • Not in stock - on order
    Designed for extendable batswoman poles, the Baton Holder Model 35 has three different sizes for 16-inch, 21-inch and 26-inch sticks. Thanks to a hole on the back of the device, the user can put the baton back into the holster, even if it is fully extended. The 35 is also available with a tactical version that can be mounted on two hole attachment points. Features
    • Designed for extendable baton
    • Extended baton can be re-holed
    • Fits 26" (66 cm) length batons
    • Part of the 6004/6005 tactical system
    • No call loop
    • stx tactical
    • MODEL: 35
    • SKU: 1099198
    • PART: 35-F26-23
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Not in stock - on order
    The Med Pouch Gear Set™ seamlessly connects to 5.11® bags, packs and duffels, providing a fast and efficient first aid solution for any application or environment. Features
    • Part of Gear Set™ system that can be placed on any Gear Set™ compatible product
    • 3-layer fold-out configuration for organization
    • Fold-out top flap with elastic and zipped pocket on the back
    • Transparent vinyl bag with elastic for two-sided access
    • Large clear vinyl main pocket with zipper
    • Loop strip for nameband
    • Velcro flap and two main opening zippers
    • Reflection
    • G-hooks, split S/R buckles and hook supports for compatibility with Gear Set™ products
    • Included on ALS/BLS duffel
  • Designed to seamlessly connect to 5.11 ® bags, packs, and duffels, the 6.6 Pouch provides lightweight all-weather storage for any application. Made of ultra-durable N500D nylon, and featuring a YKK ® zipper with a preformed handle for glove-friendly accessibility, the 6.6 Pouch is compatible with MOLLE and 5.11 ® SlickStick® web platforms for easy integration into your existing equipment. SPECIFICATIONS:
    • Multifunctional all-weather storage
    • Can be integrated with 5.11® bags, packs and duffels
    • MOLLE / SlickStick web platform compatible
    • Molded handle for accessibility with gloves
    • N500D body
    • 6" H, 6" W, 3" D - 15.2 x 15.2 x 8.9 cm
  • Has a removable elastic cord and a pull tab to facilitate the use of the pouch
    • A tight general pocket to store small objects.
    • The pouch is designed to be as lightweight and space-free as possible, while remaining strong enough for military use.
    • Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
    • The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
    • Elastic cord, on the pouch to secure the contents, even when the valve is open. The cord can be removed.
    • Bottom drain hole.
    • Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
    • It has Velcro straps on the back so that it can be worn horizontally on the belt.
    • It fits: Pistol magazine, multitool, flash light or other similar objects.
    VERSIONS * 21-01855A01-002 Black * 21-01855A09-002 Grey * 21-01855A17-002 Olive material * 100% Nylon -FR PU coated * All fabrics and tyres are IRR compliant. Dimensions H=13, W=4, D=2 cm WEIGHT 40 g
  • This is a versatile and very practical universal turnstile holder. In addition to the turnstile, you can bring Gesco scissors and a marker. On the front, the Velcro fastener allows you to attach other identification patches, while hiding the bright red embroidered TQ for added discretion. Features
    • Universal holder
    • Gesco scissor slot
    • 2 elastic loops for 1 highlighter
    • Patch lock with red embroidered TQ
    • 2 Velcro fasteners to keep it in place
    • Small mounting loop on top
    • MOLLE mounting tab with snap button
    • Vertical loop on the back
    • 100% nylon
    • Weight: 46 g
    * ATTENTION: Content not included. Just for illustration.
Go to Top