Haven't found what you were looking for ? Mail us !|info@afullmetaljacket.com
  • Not in stock - on order
    Agilite AMAP III Conversion Attachment Kit Agilite AMAP III Conversion Attachment Kit

    Agilite AMAP III Conversion Attachment Kit

    €23,95
    With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details
    • This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
    • Consists of 1 central attachment and 2 connecting buckles
    • Can be quickly and easily installed on or removed from any plate carrier
    • Once installed, you can turn AMAP III on and off in seconds
    • Equipped with loop/buckle attachment points to make the wearer Agilite-compatible
    Sizing
    • 1 size
    • Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)
    Dimensions
    • Height: 30cm (11.8")
    • Width: 15cm
    • Depth: 8mm
    Specifications
    • 500 Denier Mil Spec Tactical Nylon
    • Mil Spec Plastic Hardware
    • Fits any plate carrier with 6 horizontal MOLLE loops (or more)
    Details
  • Agilite AG3™ Placard Triple Mag Pouch Agilite AG3™ Placard Triple Mag Pouch

    Agilite AG3™ Placard Triple Mag Pouch

    €62,95 – €71,45
    The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.
    • Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).
    • Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.
    • AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.
    • The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.
    • Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.
    Sizes
    • Fits three 5.56x45 AR or M4 rifle magazines.
    • The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.
    Specifications
    • 500D CORDURA® Mil Spec Tactical Nylon |
    • Laser cut Velcro MOLLE overlay
    • Suitable for three 5.56 warehouses
    • Height adjustable
    • Weight: 0.16 kg
    • Including mil-spec G-hooks
    • Including mil-spec Polymer MOLLE Placard buckles
    Details
    • Suitable for three 5.56 warehouses
    • Makes it easy to pull or place a magazine with one hand
    • Proprietary polymer pull tab for exceptional grip
    • Reliable retention to never lose a warehouse
    • With hook closure, to be attached to any plate carrier that Placard is capable.
    • Proven in battle in Israel
    • Smart retention lip meets military requirements without obstructing access to the bag
    Select options Details
  • Agilite AG3™ 5.56 Triple Mag Pouch | Agilite AG3™ 5.56 Triple Mag Pouch |

    Agilite AG3™ 5.56 Triple Mag Pouch |

    €63,95 – €64,95
    Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details
    • Suitable for three 5.56 warehouses
    • Makes it possible to easily pull and insert the magazine with one hand
    • A patented polymer pull tab for exceptional grip
    • Reliable retention to never lose a warehouse
    • Built-in MOLLE rear mounting
    • Tested in battle in Israel
    • Smart retention tab meets military requirements without obstructing the entrance to the pouch
    Specifications
    • 500D CORDURA® Mil Spec Tactical Nylon
    • Laser cut Velcro MOLLE overlay
    • Takes 3 MOLLE slots down and 6 MOLLE slots transversely
    • Weight: 0.35lbs (0.16kg)
    Sizes
    • Suitable for three 5.56x45 AR or M4 rifle magazines
    • Takes 3 MOLLE slots down and 6 MOLLE slots transversely
    Select options Details
  • Agilite AG1™ 5.56 Single Mag Pouch | Agilite AG1™ 5.56 Single Mag Pouch |

    Agilite AG1™ 5.56 Single Mag Pouch |

    €29,95 – €34,95
    Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details
    • Fits one 5.56 warehouse
    • Makes it possible to easily pull and insert the magazine with one hand
    • A patented polymer pull tab for exceptional grip
    • Reliable retention to never lose a warehouse
    • Built-in MOLLE rear mounting
    • Tested in battle in Israel
    • Smart retention tab meets military requirements without obstructing the entrance to the pouch
    Specifications
    • 500D CORDURA® Mil Spec Tactical Nylon
    • Laser cut Velcro MOLLE overlay
    • Takes 3 MOLLE slots down and 2 MOLLE slots transversely
    • Weight: 0.14lbs (0.06g)
    Sizes
    • Suitable for one 5.56x45 AR or M4 rifle magazine
    • Takes 3 MOLLE slots down and 2 MOLLE slots transversely
    Select options Details
Go to Top