Haven't found what you were looking for ? Mail us !|info@afullmetaljacket.com
  • SnigleDesign GPS 60 pouch -14 SnigleDesign GPS 60 pouch -14

    SnigelDesign GPS 60 pouch -14

    €29,90
    Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:
    A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking
    • In the folded position the padded front of the pouch protects the GPS from shocks
    • The open mode makes it possible to walk and look at you GPS without removing it from the pouch
    • An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
    • On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
    • There are also Velcro straps for attaching the pouch on a carrier strap
    • Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
    Add to cart Details
  • SnigleDesign 8x19 pouch -14 SnigleDesign 8x19 pouch -14

    SnigelDesign 8×19 pouch -14

    €30,99 – €38,99
    A very small lightweight general purpose pouch with a wide opening top zipper.
    • It opens on 3 sides for an easy access to the contents of the pouch.
    • The zipper is semi stiffened to be easier to open and close.
    • Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
    • Inside loops for securing the contents.
    • Bottom drain hole.
    • Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
    • This system makes it possible to attach the pouch without removing other pouches from the belt.
    • Fits inside: Radio, field dressing, small binoculars or other similar sized items.
    • Measurements: L= 19, W= 8 & D= 4
    • Weight: 100 g
    • Volume: 1L
    Select options Details
  • SnigleDesign Small Admin pouch -12 SnigleDesign Small Admin pouch -12

    SnigelDesign Small Admin pouch-12 – 2.0

    €39,95 – €51,00
    A small zippered pocket on the front for papers, pens etc.
    • MOLLE tires at the front.
    • Velcro-covered exterior where you can attach a patch.
    • Window on the inside for cards or notes.
    • Inside elastic compartments for pens or papers.
    • Tuck in fastening system makes it possible to attach the bag to any equipment vest or belt.
    • The new version, 21-00309B is 4 cm wider and has a compass compartment on the back.
    • Weight:110 g
    • Dimensions:16 × 14 × 1 cm
    *Multicam version is version without compas holder. Small admin pouch -14.
    Select options Details
  • SnigleDesign GP pouch 3 -12 SnigleDesign GP pouch 3 -12

    SnigelDesign GP pouch 3 -12

    €17,99 – €19,90
    A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment
    Select options Details
  • SnigleDesign 12x19 pouch -16 SnigleDesign 12x19 pouch -16

    SnigelDesign 12×19 pouch -16

    €32,90 – €44,00
    A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside.
    Select options Details
  • SnigleDesign Radio pouch -06/15 SnigleDesign Radio pouch -06/15

    SnigelDesign Radio pouch -06/15

    €27,90
    Weight: 80 g Dimensions: L= 17, W= 6, D= 3 cm Fits in: Most handheld radios Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:
    The pouch for many different radios
    • Low cut construction to leave the speaker free
    • Padded to protect your radio
    • Elastic cord with Velcro closure to fit most radios on the market
    • Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt.
    • The -15 model has an opening in the bottom for a connector.
    Select options Details
  • Not in stock - on order
    SnigelDesign GP pouch 2 -12 SnigelDesign GP pouch 2 -12

    SnigelDesign GP pouch 2 -12

    €24,95 – €28,70
    A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment
    Details
  • SnigleDesign Twinn handcuff pouch -11 SnigleDesign Twinn handcuff pouch -11

    SnigelDesign Twinn handcuff pouch -11

    €59,95
    Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:
    A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt
    • The pouch is securely attached to the belt or vest
    • Fits normal and large handcuffs
    • Press button closure with Velcro patch
    • The Velcro patch makes it possible to fast and easy close the pouch
    • The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
    • The pouch will not absorb water, will not rot or get soft in the rain
    • Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
    Add to cart Details
  • Snigledesign Large key silencer-05 Snigledesign Large key silencer-05

    SnigelDesign Large key silencer-05

    €24,90
    Weight: 50 g Dimensions: L= 14, W= 8 & D= 2 Fits in: Keys Fits on: The equipment belt Features:
    Protects a large bunch of keys and keeps them from rattling
    • Press button closure for the key ring (included)
    • Padded cover with Velcro closure
    • Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
    Select options Details
  • SnigleDesign Regular Key silencer -05 SnigleDesign Regular Key silencer -05

    SnigelDesign Regular Key silencer -05

    €21,95
    Weight: 50 g Dimensions: L= 13, W= 7 & D= 2 Fits in: Keys Fits on: The equipment belt Features:
    Protects a bunch of keys and keeps them from rattling
    • Press button closure for the key ring (included)
    • Padded cover with Velcro closure
    • Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
    Select options Details
  • Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features: A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves 2 inside compartments for disposable gloves Fits most gloves vertically or horisontally Verticall leaves more space for other things on the belt There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt It is attached on the belt with the velcro bands on the back of the pouch You can attach the holder without removing the pouches from the belt Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features: A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves 2 inside compartments for disposable gloves Fits most gloves vertically or horisontally Verticall leaves more space for other things on the belt There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt It is attached on the belt with the velcro bands on the back of the pouch You can attach the holder without removing the pouches from the belt

    SnigelDesign Combination glove holder -09

    €19,20
    Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:
    A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves
    1. 2 inside compartments for disposable gloves
    2. Fits most gloves vertically or horisontally
      • Verticall leaves more space for other things on the belt
      • There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
    3. Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
      • It is attached on the belt with the velcro bands on the back of the pouch
      • You can attach the holder without removing the pouches from the belt
    Delivery time + - 1.5 week.
    Add to cart Details
  • SnigleDesign Elastic glove holder -05 SnigleDesign Elastic glove holder -05

    SnigelDesign Elastic glove holder -05

    €9,95
    Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:
    An elastic glove keeper to carry gloves on the belt
    • Fits most gloves
    • Threads onto the equipment belt
    • Velcro closure
    • Light weight
    Add to cart Details
  • SnigleDesign Glove holder -05 SnigleDesign Glove holder -05

    SnigelDesign Glove holder -05

    €11,95
    Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:
    A simple glove keeper to carry gloves on the belt
    • Fits most gloves
    • 3 press button adjustment for different sized gloves
    • Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
    • Light weight
    Add to cart Details
  • SnigleDeSnigleDesign Telescopic baton holder -08sign Telescopic baton holder -08 SnigleDesign Telescopic baton holder -08

    Snigel Telescopic baton holder -08

    €27,95
    This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment
    Add to cart Details
  • SnigleDesign Modular Key holder -05 SnigleDesign Modular Key holder -05

    SnigelDesign Modular Key holder -05

    €11,95
    A band with a good and secure hook to keep your keys at hand any where on your belt or equipment vest * One hand open hook, to make it easy to get the keys * Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
    • Measurements: L== 12, W= 2,5 & D= 2
    • Weight: 30 g
    Add to cart Details
  • Not in stock - on order
    SnigleDesign Basic key holder -05 SnigleDesign Basic key holder -05

    SnigelDesign Basic key holder -05

    €9,50
    A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g
    Details

Title

Go to Top