- Made from 100% polyester 500x300 denier water and scratch resistant.
- High-density padding to perfectly stabilize the contents and protect the main parts of the gun.
- Breathing against humidity.
- Padded handle with Velcro and non-slip shoulder strap for easy transport
- Two-way lockable zipper with easy-to-grab tractor.
- Hang crochet.
-
Not in stock - on order
Bag for 50 cartridges with adjustable belt. Details: Size: 18.5x21.5x9 Capacity: 50 cartridges. Design Beretta contest. Adjustable belt with buckle fastening. Elastic for 3 choke coils/cartridges. Uniform Pro Uniform Pro is a complete range of bags and suitcases that are extremely light and resilient, specially developed for shooting ranges. -
Not in stock - on order
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment -
This insert fits in the Snigel Trauma Pouch -17 and facilitates keeping all contents in order. Three 5 cm wide elastic attachments, a net pocket and two plastic covers for e.g. trauma cards (TCCC) or instructions. By pulling the Velcro, the insert is detached in one operation and ready for use. Please note that medical equipment is sold separately. -
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Not in stock - on order
A lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm. -
Not in stock - on order
A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g. -
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
A very small lightweight general purpose pouch with a wide opening top zipper.- It opens on 3 sides for an easy access to the contents of the pouch.
- The zipper is semi stiffened to be easier to open and close.
- Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
- Inside loops for securing the contents.
- Bottom drain hole.
- Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
- This system makes it possible to attach the pouch without removing other pouches from the belt.
- Fits inside: Radio, field dressing, small binoculars or other similar sized items.
- Measurements: L= 19, W= 8 & D= 4
- Weight: 100 g
- Volume: 1L
-
Not in stock - on order
A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g -
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Not in stock - on order
A small backpack or pouch for your ballistic plate.- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g