-
Not in stock - on order
The 3M ™ PELTOR ™ Bull's Eye ™ I Ear Muffs were designed in collaboration with world-class sportsmen to develop hearing protection suitable for snipers. For example, the lower part of each cap is sloping, so that the end of the gun does not touch the hearing protector. The attenuation of the hearing protector is sufficient for most noisy situations, without being too large. Soft, wide cushions help reduce pressure on the ears, and improve comfort and portability It is important that you wear protection when exposed to noise and not to get distracted while shooting. Easily replaceable cushions and inserts help to keep them hygienic and clean Foldable headband for easy storage in a pocket of your clothes or in a bag. SNR value 27. -
Not in stock - on order
A joint effort between 5.11®, Blade-Tech®, and the field testers at Viking Tactics®, the 5.11® Beretta 92 ThumbDrive® Holster was created to be the fastest-drawing and most secure Level II Holster in the world.FEATURES AND BENEFITS
- Designed to be the fastest and safest Level II holster in the world
- Enhanced weapon retention characteristics
- ChopBlock™ removable switch guard
SPECIFICATIONS
- Created in partnership with Blade-Tech®
- Viking Tactics® field tester approved
- Belt Paddle and Slide included
- Slide accommodates up to 2.25" belts
- Thigh Rig and Drop/Offset kits for the ThumbDrive® Holster sold separately
-
Not in stock - on order
Engineered to be the quickest and safest Level II Holster in the world, the 5.11® Glock 17/22 ThumbDrive® Holster was created in partnership with Blade-Tec and field tested by Viking Tactics®. FEATURES DETAILS- Built to be the quickest and safest Level II holster in the world
- Proprietary single-thumb retention system
- Includes the ChopBlock™ switch guard
- Engineered in partnership with Blade-Tech®
- Thoroughly field-tested by Viking Tactics®
- Includes a Belt Slide and Belt Paddle
- Will accommodate up to 2.25” belts
- Thigh Rig and Drop/Offset kits available
- Imported
-
Not in stock - on order
Built to be the fastest and safest Level II Holster on the market, the 5.11® Glock 19/23 ThumbDrive® Holster was field tested by Viking Tactics® and constructed in partnership with Blade-Tech®.FEATURES AND BENEFITS
- Built to be the fastest and safest Level II holster on the market
- Exclusive single-thumb retention system
- ChopBlock™ switch protector
SPECIFICATIONS
- Tested in the field by Viking Tactics®
- Constructed in partnership with Blade-Tech®
- Belt Paddle and Slide includes
- Will accommodate up to 2.25” belts
- Drop/Offset and Thigh Rig kits available
-
Built with help from world-renowned tactical instructor Kyle E. Lamb, the 5.11 Tactical VTAC® 2 Point Padded Sling complements any standard rifle or submachine gun, offering superior flexibility and safety in any tactical situation. The quick-adjust action allows you to quickly switch shoulders or pull your firearm closer for tighter support in close quarters. The heavy nylon construction ensures durability and traction in all weather conditions, and the improved shoulder padding increases comfort. SPECIFICATIONS:- Safe and reliable 2-point rifle noose
- Quick to adjust for a quick shoulder/length transition
- Suitable for rifle or submachine gun
- Improved shoulder padding
- Heavy nylon for all weather conditions
- Superior traction in wet climates
- High impact clips
- Width: 2.5 cm
- 100% nylon
-
Not in stock - on order
Built with assistance from world famous tactical instructor Kyle E. Lamb, the VTAC® 2 Point Sling augments any standard size rifle or submachine gun to provide superior flexibility and security in any tactical situation.FEATURES DETAILS
- Secure and reliable 2 point rifle sling
- Quick adjust allows fast shoulder/length transition
- Fits a rifle or sub machinegun
- Heavy duty all-weather nylon
- Superior traction in wet climates
- High impact clips
- Imported
-
Not in stock - on order
Details- Maximum breathability and airflow
- Strong but next to no weight
- Ambidextrous fitting
- Adjustable and comfortable
- Made for K-Series elements
- Weight 47 grams (1.66oz) each
- Mil Spec mesh and materials
- Mil Spec polymer hardware
-
Not in stock - on order
- BERETTA CLASH EYEGLASSES FUME
- Dimension: 2.85 X 3.80 X 7.55
- Height: 2.8500
- Width: 3.8000
- Length: 7.5500
- LENS COLOR: FUME
- SIZE: ADULT
- OTHER FEATURES:: INCLUDES STORAGE CASE,
- : MICROFIBER CLOTH STORAGE BAG
-
Not in stock - on order
- BERETTA SHOOTING GLASSES CLASH
- NEUTRAL W/RIGID CASE
- Dimension: 2.85 X 3.80 X 7.55
- Height: 2.8500
- Width: 3.8000
- Length: 7.5500
- LENS COLOR: NEUTRAL
- SIZE: ADULT
- OTHER FEATURES:: INCLUDES STORAGE CASE,
- : MICROFIBER CLOTH STORAGE BAG
-
Not in stock - on order
- BERETTA CLASH EYEGLASSES YELLOW
- Dimension: 2.85 X 3.80 X 7.55
- Height: 2.8500
- Width: 3.8000
- Length: 7.5500
- LENS COLOR: YELLOW
- SIZE: ADULT
- OTHER FEATURES:: INCLUDES STORAGE CASE,
- : MICROFIBER CLOTH STORAGE BAG
-
Not in stock - on order
Bag for 50 cartridges with adjustable belt. Details: Size: 18.5x21.5x9 Capacity: 50 cartridges. Design Beretta contest. Adjustable belt with buckle fastening. Elastic for 3 choke coils/cartridges. Uniform Pro Uniform Pro is a complete range of bags and suitcases that are extremely light and resilient, specially developed for shooting ranges.- Made from 100% polyester 500x300 denier water and scratch resistant.
- High-density padding to perfectly stabilize the contents and protect the main parts of the gun.
- Breathing against humidity.
- Padded handle with Velcro and non-slip shoulder strap for easy transport
- Two-way lockable zipper with easy-to-grab tractor.
- Hang crochet.
-
Developed for civilian concealed carry and range use, the Blackhawk! Serpa CQC Sportster Holster is constructed with an injection molded polymer for long-lasting durability. It features the same dependable Serpa technology but is specifically tailored for low-threat civilian operation. Its speed-cut design allows for rapid draw, target acquisition, and re-holster. This holster has a Serpa Auto Lock release and a passive retention detent adjustment screw. The Sportster fits Shoulder, S.T.R.I.K.E., Quick Disconnect, and Tactical Holster platforms. This paddle platform model has a gunmetal gray holster body with black locking mechanism and is compatible with Glock 20/21/37 models. -
Not in stock - on order
BlackHawk Serpa CQC Concealment Holster for Glock 43 -Featuring our patented SERPA Auto Lock™ release, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled weapon security in a sleek package that is perfect for concealed carry.- Color: Black Matte Finish
- SERPA Auto Lock release
- Passive retention detent adjustment screw
- Speed-cut design for rapid draw, target acquisition and re-holster
- Includes Belt Loop Platform and Paddle Platform
- Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms
- Fits Glock 43
- MPN-410568BK-R
-
Not in stock - on order
Designed to create a custom fit for a wide array of product combinations, the CustomFit Dual Sheath holds two items plus a pen. The patent-pending, richly featured sheath includes a quick access back panel that allows the user to customize it to perfectly fit the tools selected for the tasks of the day. Quiet Deploy™ technology is activated by simply pulling down the front tab for stealth-like access – they’ll never hear you coming. * Goods shown in the sheath not included. Shipping within 24 hours! -
Not in stock - on order
- Hearing hood with headband
- These ear muffs are specially made for younger people, including children, to protect them against moderate noise in everyday situations such as social and relaxing activities
- Highly visible colors that attract attention and therefore increase safety
- Unique low profile headband ensures constant pressure and gives more confidence in protection
- Large space in the hood prevents build-up of moisture and heat
- Soft, wide cushions reduce pressure around the ears and ensure more comfort and portability
- Easy-to-replace cushions and protective covers keep them hygienically clean
- Average damping value SNR 27 dB (A)
-
Not in stock - on order
The 3M ™ PELTOR ™ SportTac ™ is an intelligent active hearing protection, specially developed for hunters and shooters. The soft adjustment of the level-dependent function of the hearing protection gives the user a particularly pleasant sound reproduction and less interference. The electronics react at light speed and protect the user's hearing against loud impulse noises. Soft, level-dependent operation that eliminates sudden noise interruptions. Replaceable caps make it easy to change the color. Equipped with automatic switch-off function. Foldable headband for easy storage. Audio input for external radio.Specifications
Attenuation rating (HML): H29, M23, L16 Attenuation: 26dB Features: Level dependent function Approvals / standards: CE Approved Color red Battery life: Approx. 600 hours Net weight: 318gr. Product series: SportTac Product type: Communication headsets Hearing protection type: Foldable headband Type of communication: External Audio Input, Level dependent Connection type: J22 audio input -
Not in stock - on order
3M Peltor Tactical XP hearing protection
The 3M Peltor Tactical XP is an electronic, level-dependent hearing protection with a large number of setting options. Model TACXPF has a folding headband and a damping value of SNR = 31 dB. The Tactical XP headset combines comfort and safety with superior technology. For example, an innovative digital circuit enables individual adaptation of hearing protection to the relevant working environment, because, for example, the volume of the level-dependent function can be controlled. In addition, the headset has an equalizer, a balance control, an adjustable release time and a volume control for external input signals. A voice is particularly useful that easily guides the user through the menu. The extremely cushioning ear cups with soft, non-slip sealing rings ensure an optimal fit and high comfort. The padded, wide headband made of high-quality stainless steel makes the Tactical XP very comfortable even with prolonged use. The application areas of the 3M Peltor Tactical XP are everywhere where protection against harmful noise and at the same time communication is required, for example in industrial production, in construction and in the oil and gas industry. We order this product for you. Delivery time + - 2 weeks. -
Not in stock - on order
3Mdeveloped the new 3M Peltor X-seriesear muffs based on three pillars: design, comfort and protection. 3M developed the new 3M Peltor X-series ear muffs based on three pillars: design, comfort and protection. In addition to their simple use and easy identification (based on color), this new series of ear muffs is now the reference among the ear muffs. Attributes- Finely designed shells ensure good cushioning.
- Suitable for most industrial applications.
- Attenuation value of SNR 27 dB.
- Lightweight design.
- Simple color code: green stands for the first level of damping in this series.
-
Not in stock - on order
Comfortable and high attenuation!
In the past, ear muffs with higher levels of attenuation were synonymous with large and bulky shells, but that time is over. The Peltor X4A ear muffs can mute the sound with 33 dB, while still having a streamlined, unobtrusive and beautiful design.Pros
- Attenuation value of 33 dB
- The extremely thin and light shells ensure unparalleled good wearing comfort
- The Peltor X4A works well with other personal protective equipment from 3M.
- Fluorescent yellow-green color ensures good visibility when working outdoors and improves safety.
- New specially developed damping cushions and an innovative foam in the sealing ring provide excellent acoustic protection, especially against sounds with many low frequencies.
- To be worn by both young and old. (from ± 7 years)
-
Not in stock - on order
Attenuation of no less than 37 dB!
New breakthrough technology that helps to achieve exceptionally high performance. The technology is not only applied to the version with headband but also to the version for helmet attachment. Unique damping thanks to an optimal combination of the specially developed foam technology that is used in the shells and the sealing rings and the design of the spacer and shells.Pros
- Despite the larger shells, the product remains relatively light and offers an excellent balance and wearing comfort.
- Color code black for easy use in extremely noisy environments.
- The most dampening passive ear cup on the market
Age: suitable from 12 years.Delivery time + - 1 week. -
A safe, easy, smooth and breathable leg mounting plate that is easy to use, attach and remove from the leg. It fits securely to your belt. A firm and ventilated place on your leg for one to four pouches. Mesh, perforated plastic sheet and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure keep the leg plate on your leg. The quick release with swivel function attaches the leg plate to your belt. The leg plate is soft and barely noticeable when wearing. The leg straps are elastic so that they are tight and comfortable. It is suitable for most pockets and holders in our system. It does not absorb water and does not gain weight when wet. One size fits all. Fits: Pistol holster and all types of pouches Beware: Belts and equipment belts -
Not in stock - on order
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment -
This insert fits in the Snigel Trauma Pouch -17 and facilitates keeping all contents in order. Three 5 cm wide elastic attachments, a net pocket and two plastic covers for e.g. trauma cards (TCCC) or instructions. By pulling the Velcro, the insert is detached in one operation and ready for use. Please note that medical equipment is sold separately. -
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Not in stock - on order
A lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm. -
Not in stock - on order
A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g. -
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
A very small lightweight general purpose pouch with a wide opening top zipper.- It opens on 3 sides for an easy access to the contents of the pouch.
- The zipper is semi stiffened to be easier to open and close.
- Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
- Inside loops for securing the contents.
- Bottom drain hole.
- Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
- This system makes it possible to attach the pouch without removing other pouches from the belt.
- Fits inside: Radio, field dressing, small binoculars or other similar sized items.
- Measurements: L= 19, W= 8 & D= 4
- Weight: 100 g
- Volume: 1L
-
Not in stock - on order
A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g -
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Not in stock - on order
A small backpack or pouch for your ballistic plate.- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
Not in stock - on order
For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g -
Not in stock - on order
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 2 x 30 round 5,56 magazines
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments.Low cut front for fast access. Large flap for dirt protection. Inside elastic band to secure one magazine. Eyelet in the bottom to let water out.Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:An elastic glove keeper to carry gloves on the belt-
Fits most gloves
-
Threads onto the equipment belt
-
Velcro closure
-
Light weight
-
-
Not in stock - on order
Weight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:A simple glove keeper to carry gloves on the belt-
Fits most gloves
-
3 press button adjustment for different sized gloves
-
Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
-
Light weight
-
-
Not in stock - on order
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment -
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Long and narrow gear like flashlights and other similar items. Dimensions: H = 15 cm, W = 4 cm, D = 3 cm Weight: 50 g. -
A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment -
Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking-
In the folded position the padded front of the pouch protects the GPS from shocks
-
The open mode makes it possible to walk and look at you GPS without removing it from the pouch
-
An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
-
On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
-
There are also Velcro straps for attaching the pouch on a carrier strap
-
Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
-
-
A versatile, light and easy to use pouch for different kinds of grenades which is simple, quiet and easy to access. tab to open the lid. You can now easily grab a grenadeWeight: 90 g Dimensions: L= 14, W= 9 & D=7 Volum= 0,6L Fits in: Grenades, smoke grenade, 2x40 mm grenades, field dressing, GPS, compass or other small items Features:- Attaches with the tuck back system to the equipment vest
- Pull the large tab to open the flap
-
The tab is designed to be easy to use with gloves on
-
The grenade pouch attaches safely on both belt and vest. A grenade sits safely in the pouch with the lid closed
-
The lid closes securely with two press buttons for double safety. An elastic band keeps the grenade in place while the lid is open
-
There are three positions for the press buttons to accommodate small or large grenades
- The elastic holds any possible movable parts of the grenade in place so that they do not make any noise or rattle
