- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
Not in stock - on orderA padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.
-
The next generation of user-friendly Snigel zippered pouches. CHARACTERISTICS:
- A lightweight general purpose pouch with a wide opening top zipper.
- It opens on 3 sides for easy access to the contents of the pouch.
- The zipper is half stiffened and placed at an angle to make it easier to open and close.
- Soil drain.
- Foldable fastening system makes it possible to attach the bag to any equipment vest or belt. MOLLE / PALS band on the outside.
- Three rows of tires are covered with Velcro so that patches can be attached.
- Small: 100 g
- Medium: 130 g
- Large: 160 g
- Small: L = 19, B = 8 & D = 6 cm.
- Medium: L = 19, B = 12 & D = 8 cm.
- Large: L = 19, B = 16 & D = 9 cm.
- 100% polyamide PU-coated fabric.
- 100% polyester band
-
Not in stock - on orderAn overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest
-
- A small wallet for coins and notes with an identity card holder.
- Closure with Velcro.
- Inner compartments for credit cards and driver's license.
- Outdoor compartment with zipper for coin.
- Holder for a neck cord.
- Dimensions: 10 x 9 x 1 cm
- Weight: 40gram
- Part number: 52-00090-01-000
-
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the equipment vest, under another pouch it does not take up any space.... Pull the square ring down, naturally, when you want to open the case. Suitable for 4 warehouses. Attributes Weight:100 g Dimensions:4 x 12 x 35 cm Color: Black or Grey
-
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:
- The perfect case to carry ammunition for the SAW/Minimi machine gun
- For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
- Also suitable for 7.62 coupled ammunition
- Can be used for 2 Cal 50 warehouses
- Webbing on both sides for attaching small bags
- The pouch can be attached to the vest or worn in a shoulder strap (not included)
- Article number: 22-00511-09-000
- EAN: 7332673301539
- Weight: 300 grams
- Dimensions: 18 x 19 x 8 cm
- Category: Holders & bags
- Color: Grey
-
We have removed the MOLLE from the front of the bag in this new version. A handy shoulder bag for all those things that end up in your arms when you least wish for it. Easy to carry and keeps everything you wear at your fingertips. A grab bag with six inner compartments for warehouses, radios and all kinds of tactical or outdoor equipment during your hikes. Two compartments are equipped with a zipper to further secure the contents. Opening with zipper to the main compartment and a drawstring closure inside. Removable shoulder strap with buckle. Removable waistband with buckle. Eyelet in the soil to let water through. Also very useful for walks with your dog to bring the necessary things.
- Weight: 450 g
- Dimensions:30 × 30 × 17 cm
- Volume: 10L
-
A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included.
-
Our latest low profile design, designed for integration of ballistic vest, includes 2 liters in a ballistic vest and 3 liters in a package. Maximum use of low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. Features
- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Low Profile: maximum use of low-profile technology reduces the depth of the wearer
- The horizontal blow connector allows the drinks hose to be routed out of the ballistic plate bag without kinking the hose
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; let the tube become 25 cm shorter; less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; airtight seal
- QMT hose/reservoir connector with seal ensures quick and leak-proof removal of the bladder to refill it
-
Not in stock - on orderA minimalist solution with a lot of functionality per gram! An innovation by Anton Matsson. The harness is easily attached to the object you want to wear and is usually used in two different types of configurations. To adjust the length of the strap, the line is simply tied off. In the backpack configuration, an object is attached at two points, this could be a second weapon system or a chainsaw for example. In this configuration, a jacket or sweater may have been changed to a temporary backpack. In the suspender configuration, the lines are interwoven and placed on your back. In this configuration, an object is attached by a point in the top, this can be a pair of gas canisters or water jugs, ammunition holders or a stretcher. For most applications, the lines are usually directly connected to the object. To the pendulum points of the weapons system, for example. Fix it, wear it or drag it!
-
Not in stock - on orderThe blanket has a fleece construction with a high loft in combination with a waterproof and breathable outer fabric. The blanket has two functions: a traditional blanket and an insulated poncho worn over the shoulders. The blanket fits in its own compact bag measuring 19x13x24 cm. Laid flat, the blanket is 145 cm long, 80 cm wide at the foot and 110 cm at the top. The blanket is ideal for 24-48 hour missions and effectively repels the cold during rest or guard duty. The blanket can be easily attached around your shoulders with five press studs.
- The blanket is made of fleece with a waterproof/breathable outer fabric.
- It can be used as a blanket or as a poncho over the shoulders.
- Perfect for a 24-48 hour mission.
- Keeps the cold away when you're asleep or on watch.
- With a push button, you can attach it over your shoulders.
- Packed in its own small bag, 17x12x23 cm.
-
The Snigel light combat belt is a lightweight, comfortable and slim strap for your first gear. Features
- Padded belt with 2 MOLLE webbing sewn on the outside for a comfortable wearing of any type of pocket or holster.
- The MOLLE webbings are sewn on 8 cm wide MOLLE panels, with slots between the panels so that: the inner tube can be woven on the inside; or outdoors, depending on whether you want MOLLE mounting or belt mounting for holsters and other accessories.
- Remove the inner tube and use the riggers strap to combine the functions of both straps.
- On the inside of the belt, Velcro loop stripes are sewn to match/connect with a belt with Velcro on the outside.
- Four loops are sewn into the top of the belt so you can attach a harness or suspenders if necessary.
- The foam/1mm HDPE padding can be removed if you want an even slimmer strap.
- 100% polyamide PU-coated fabric.
- 100% polyester webbing
- 100% polyethylene foam and plastic plate.
- 13-01897A09-001 - 0H-J (XS/S): 82-120 cm
- 13-01897A09-002 - K-M (M/L): 94-132 cm
- 13-01897A09-003 -N-P (XL / XXL): 106-148 cm
-
Not in stock - on orderA pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5