-
A grey and black patch with the dog's head and the text K9. 70 mm. Velcro on the back so that the patch can be attached to Velcro surfaces of bags and pouches. -
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
An evolution of the classic balaclava, with a strong mesh over mouth and nostrils, allowing you to breathe freely - even during strenuous tasks - while still providing protection. Lightweight and thin enough to wear under a helmet, as protection from wind and cold, but airy enough to wear in warm weather. The Annaclava is cut long to cover the entire neck well. Flatlock seams for more durability and comfort. Use it as a hat by putting the excess material in the hat. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Weight: 50 g Dimensions: L= 14, W= 11 & D= 2,5 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Not in stock - on order
Weight: 40 g Dimensions: L= 11, W= 9 & D= 2 Fits in: Handcuffs - only classic model with chain ! Fits on: Equipment vest, belt, leg plate or leg attachment Features:A light weight pouch for handcuffs which is are flexible and can be used on the duty belt or covertly. The pouch is designed to be small, lightweight, flexible and to comfortably hold your handcuffs-
Open top for lowest weight
-
The pouch can easily be opened with one hand
-
It sits comfortably mounted on the belt and can be closed with the press button
-
The weight is only 15 grams. The material does not retain water so is no heavier if wet
-
Can be attached without removing items from the duty belt
-
Use the velcro strap on the back to attach the holder to the duty belt. You can open and attach it to the outer belt without removing other pouches
- Open the straps and thread them around the belt and close it with the velcro straps.
-
-
For the group medic or the technician etc. who wants to carry the required equipment on the equipment vest, around the waist, on the back, over the shoulder or attached to the back pack Large compartment with Velcro flap inside the bag Four small and zipped compartments in clear plastic inside the main compartment. Four elasticized compartments with Velcro closure on top of the main compartment One large and two small inside pouches in different colors are attached with Velcro to the bottom of the bag. Zipped closure with emergency closure buckle on the top. Two padded shoulder straps with chest strap to be used when carrying the bag as a backpack. Two long straps to attach it to the back of the equipment vest or to connect and use as a shoulder strap. Roll up ends with Velcro to keep the bands neat. Two short straps to secure it to the equipment vest or to secure it around the leg. Handle in the top to carry the bag in your hand. Outside Velcro stripes so you can attach your markings. Fits: Medical supplies or technical equipment Fits on: The equipment vest back, over your shoulder or around your waist Dimensions: H=33, W=30 & D=10 cm. Volume: 10L Weight: 1200 g -
keeps your personal belongings dry in the backpack.- 100% waterproof.
- Roll up the ends with a buckle on the side.
- Velcro patch that can be removed to mark the contents of the bag.
- Three bags in the set, small, medium and large for different items.
- Store and protect all your belongings in the backpack.
- Better than one big waterproof bag for backpacks with zipper openings and outer pockets.
- The largest bag contains your sleeping bag or spare clothing and is 70 cm high and 36 cm wide.
- The middle bag is 52 cm long and 26 cm wide.
- The smallest bag is 42 cm high and flat 20 cm wide.
- Article number: 26-01082A09-000
- Weight: 200g
- Dimensions: 30 x 5 x 5 cm
- Colour: Grey
-
A practical model that has been used and refined for a long time, the product of years of development. A practical outer pocket with Velcro closure, to have ID:s or similar cards at hand. Two loops for a string (not included) in the top edge of the wallet, making it possible to carry the wallet around the neck with an ID card visible. On the inside a Velcro closed compartment for coins, two windows for ID cards and 4 pockets for credit or parking cards etc. There is also a box for membership cards etc. On the inside there is a full-width compartment for banknotes with a partition for storing foreign notes separately. Smaller pockets are sewn on the back of the inside to store business cards etc. Fits: Money, credit card, ID card etc. Beware: In your hand, around your neck or in your pocket -
A tight fitting FR neck gaiter that can be used to protect your neck, as adust cover for your mouth or as a beanie. Light weight and thin to be comfortable in most situations. Material: 63% Lenzing FR/ 29% Conex/ 5% Twaron/ 2% Elastane/ 1% Belltron Hat and equipment not included, for illustrative purposes only. -
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g -
A band with a good and secure hook to keep your keys at hand any where on your belt or equipment vest * One hand open hook, to make it easy to get the keys * Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt- Measurements: L== 12, W= 2,5 & D= 2
- Weight: 30 g
-
Weight: 50 g Dimensions: L= 13, W= 7 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a bunch of keys and keeps them from rattling-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Not in stock - on order
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment -
A small zippered pocket on the front for papers, pens etc.- MOLLE tires at the front.
- Velcro-covered exterior where you can attach a patch.
- Window on the inside for cards or notes.
- Inside elastic compartments for pens or papers.
- Tuck in fastening system makes it possible to attach the bag to any equipment vest or belt.
- The new version, 21-00309B is 4 cm wider and has a compass compartment on the back.
- Weight:110 g
- Dimensions:16 × 14 × 1 cm
