• Weight: 1,2 kg Dimensions: 54 x 34 x 11 cm Fits: Cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or inside the specialist backpack medium/40L Features:
    An insert for the cameras, video recorders and other optical or sensitive equipment that can be carried on its own or in the Specialist Backpack-medium
    • Removable walls that can be configured to suit your equipment
    • Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside
    • The outside has a zipped compartment for papers and pens and can be used as a "table" in a surveillance operation
    • The flap can be removed and attached to the Specialist Backpack-medium for easier access
    • 6 zipped compartments for memory cards, cleaning equipment etc are placed on the inside of the flap
    • Padded shoulder strap with snap hooks
    • 2 handles
  • Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions.
  • Not in stock - on order
    An equipment belt system with an inner and an outer belt. The 45 mm wide inner belt is carried in the trousers and the outer 45 mm wide belt is attached on theinner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm
  • A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.
    • Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
    • A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
    • The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
    Weight: 50 gr Dimensions: 8x15x2 cm
  • Not in stock - on order
    A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.
    • Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
    • Content: 50L.
    • Dimensions: B = 34, H = 62, D = 22 cm.
    • Weight: 1850 grams.
    This item has been replaced by the upgraded version Snigel 50L mission backpack 2.0 -- > https://shop.afullmetaljacket.com/product/snigel-50l-mission-backpack-2-0/
  • Not in stock - on order
    A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.
    • Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
    • A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
    • The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
    Weight: 50 gr Dimensions: 8x15x2 cm
  • SnigelDesign 8×19 pouch -14

    30,9938,99
    A very small lightweight general purpose pouch with a wide opening top zipper.
    • It opens on 3 sides for an easy access to the contents of the pouch.
    • The zipper is semi stiffened to be easier to open and close.
    • Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
    • Inside loops for securing the contents.
    • Bottom drain hole.
    • Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
    • This system makes it possible to attach the pouch without removing other pouches from the belt.
    • Fits inside: Radio, field dressing, small binoculars or other similar sized items.
    • Measurements: L= 19, W= 8 & D= 4
    • Weight: 100 g
    • Volume: 1L
  • A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached.
  • A well designed belt to improve your comfort when you carry a normal load
    Weight: 250 g Fits: All pouches and holders Features:
    • Plastic reinforced
    • One belt construction
    • 3 point security buckle, prevents unwanted opening
    The belt fits the following waist measurements:
    Small: 75-103 cm
    Medium: 85-113 cm
    Large: 95-123 cm
    XLarge: 105-133 cm
  • Not in stock - on order
    A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g
  • Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch
    • Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
    • Low cut front for fast access
    • Large flap for dirt protection
    • The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
    • Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
    Fits in: One 10 shot Cal.50 magazine Fits on: Equipment vest, leg platform and the specialist backpack Weight: 210 g Dimensions: L= 16, W= 16 & D= 4,5
  • Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:
    A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt
    • The pouch is securely attached to the belt or vest
    • elcro closed flap.
    • The Velcro patch makes it possible to fast and easy close the pouch
    • The pouch will not absorb water, will not rot or get soft in the rain
    • Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
  • Not in stock - on order
    The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium.
  • Not in stock - on order
    A small backpack or pouch for your ballistic plate.
    • Can hold one ballistic panel & plate and one hydration system.
    • Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
    • MOLLE bands on the outside so you can attach other pouches on it.
    • Velcro patches on the front for name and unit signs.
    • The bottom of the plate carrier can be opened to insert plates, panels and bladders..
    • Velcro secured openings in the top for cables or a hydration tube.
    Dimensions: L=36 & W=31 cm Weight: 240 g
  • Not in stock - on order

    SnigelDesign Carrier pouch DF -12

    169,00239,95
    A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g
  • Not in stock - on order
    A string with emergency release buckle in the back to carry a identity card or similar. Our wallet can also be carried in it. Dimensions: L=80 cm.
Go to Top