-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included. -
On the modern battlefield, communication is key, just as important as your firepower or ballistic protection. The Skeletonized Comms Wings Set is a set of two plate carrier side wings that can accommodate most individual radios, including AN/PRC-148 or AN/PRC-152. Each wing is adjustable in height for different radio configurations (with or without battery etc.). More so – the wings also accommodate 2 AR-style magazines. The laser-cut holes on the front have been carefully designed to work with the side buckles of the Front Flap Rig Interface.- RAW MATERIAL: Cordura® 500D and Nylon 210D laminate
- Size: one-size-fits-all
- WEIGHT [LB]: 0.18
- WEIGHT [G]: 80
- DIMENSIONS [IN] : reed 8.85'', height 6.5'' (dimensions single piece)
- DIMENSIONS [CM]: width 22.5cm, height 16.5cm (dimensions per piece)
- SKU: PO-SKCW-CD5
-
Not in stock - on order
TENT REPAIR KIT The tent repair kit is suitable for repairing tents made of both cotton and cotton mix. The repair patches are fireproof pieces of cotton mix. The kit contains approximately 90 round spots for tents with a diameter of 5 cm and 6 cm, 2 pieces of 40 × 50 cm, 35 ml repair glue and instructions. The patches are intended for cotton mix fire-resistant tents, but they can also be used to repair non-fire-resistant tents. Perform repairs in a well-ventilated area. The glue irritates eyes and skin. The damaged area must be dry and clean from grease or dirt. Divide the glue on to the damaged area and the patch with a brush or spatula. Allow the glue to dry for 5-15 minutes, depending on the air temperature and relative humidity. Press the patch on the damaged area. Squeeze with your hands into the repaired area and make sure that the patch is securely secured by, for example, lightly beating with a rubber hammer. Note! The patch cannot be moved after repair. The glue is immediately firmly secured and the final fixation is reached after 7 days. Beware of glue stains, as the glue can only be removed after drying with acetone or a similar solvent. You should observe the effect of the solvent on the substance when using solvents. If you get glue on your skin, wash it off with soap and hot water. If you get glue in your eye, rinse immediately with plenty of hot water and seek medical attention. Seek medical attention immediately if you have swallowed the substance. Keep the glue out of reach of children. KEY FLAG PRODUCT This product is manufactured at our factory in Karstula, Finland. -
Pursuit D5 cut-resistant gloves protect law enforcement professionals with EN 388: 2016 level D & ANSI A5 blade-cut resistance in the field. The glove is anatomically designed to the natural curvatures of your hand using three-dimensional patterning to create a snug fit. The Pursuit D5 features carbon-infused touchscreen capable synthetic leather lined with Armortex® cut-resistance.FEATURES- Thermoplastic Rubber (TPR) closure creates a secure fit to your wrist.
- Internal layer of Armortex® delivers EN 388: 2016 level D & ANSI A5 blade-cut resistance to the palm and fingers.
- Breathable TrekDry keeps your hands cool and comfortable.
- Three-dimensional patterning conforms to the natural curvatures of your hand.
- Durable synthetic leather palm infused with touchscreen technology.
- Nylon carrier loops for storage.
- Machine washable.
INTENDED USES -
The Performance Utili-T of 5.11 Tactical is an extremely comfortable, tailored T-shirt with contrasting colors. The Enduro-Flex main fabric is a polyester jersey fabric, moisture-wicking and odour-fighting. Material 100% polyester jersey Details:- Wear resistant and resistant to pilling.
- Odour-inhibiting and breathable.
- Stretchy round neck made of polyester elastane fabric.
- Long cut.
- Weight: approx. 169 g / piece (size L).
-
The Recon is a high-quality leather tactical glove designed to support law enforcement with versatile hand protection in the field. The glove is anatomically designed to the natural curves of your hand using three-dimensional patterns to create a good fit. The palm features touch screen-capable goat leather to provide the perfect blend of agility and durability in the field. Intended use- Police
- Shooting sport
- Closure of thermoplastic rubber (TPR) ensures a firm fit on your wrist.
- Comfortable stretch spandex forms to the hand back.
- Three-dimensional patterns correspond to the natural curvatures of your hand.
- Thumb overlay of goat leather improves durability.
- Goat leather palm protection with touchscreen.
- Design with pinched trigger finger eliminates material overlap.
- Special flexible joints improve the mobility of the fingers.
- Nylon carrying loops for storage
-
Not in stock - on order
Designed for extendable batswoman poles, the Baton Holder Model 35 has three different sizes for 16-inch, 21-inch and 26-inch sticks. Thanks to a hole on the back of the device, the user can put the baton back into the holster, even if it is fully extended. The 35 is also available with a tactical version that can be mounted on two hole attachment points. Features- Designed for extendable baton
- Extended baton can be re-holed
- Fits 26" (66 cm) length batons
- Part of the 6004/6005 tactical system
- No call loop
- stx tactical
- MODEL: 35
- SKU: 1099198
- PART: 35-F26-23
-
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
The Explorer Cases 2209.BE is a black transport case with inner dimensions of 220 x 160 x 95 mm. The case is indestructible, 100% waterproof and provides complete protection for all your fragile and valuable belongings. The case is fully certified and can therefore withstand the harshest conditions and shocks. Is there something wrong with your suitcase? Then you can rely on a lifetime warranty! . By means of optionally available accessories, you can also equip this Explorer Case with, for example, picking foam, a combination lock or shoulder kit. - Explorer Cases article: 2209.BE -Model: Empty - Color: Black Application Explorer Cases 2209.BE The transport case is an extremely suitable tool for the safe transport of smaller electronics such as a DSLR, smartphone, but also for camera lenses, for example. Due to its compact size and light weight, you can safely take the case - with its contents - with you wherever you go. In addition, the 2209 is allowed as carry-on luggage on the plane. The Explorer Case 2209 is also available in orange and green. Do you want this case in that other color, or have you seen another Explorer Case that you can't find with us? Please contact us. Why Explorer Cases Italia? • Lifetime warranty • 100% waterproof, moisture-proof and dustproof • Resistant to chemicals by means of demonstrable certificates • Resistant to hard impacts • Effortless to use at temperatures from -33 to + 90 C° • Allowed as carry-on baggage on the plane • 100% Made in Italy SpecificationsBrand: 
Explorer Cases Certificates: IP67, STANAG 4280 (ed. 2), DEF STAN 81-41 (lev. J) Extra options: Compatible with Combination Lock, Suitable for Air Freight Suitable for: Compact Cameras, DSLR, Smaller Electronics, Lenses, Outdoor Explorer Cases Series: 2209 / 2214 Weight empty: 0.88 kg Buoyancy: 2.3 kg -
The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system. -
Not in stock - on order
The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system. -
Not in stock - on order
C-A-T Turnstile GEN7 Blue for training purposes
Mandatory remedy with an ECC certificate
- Training model of the CAT Turnstile Gen7
- Recognizable by the blue color
- Only suitable for training purposes
Authenticity
Currently, there are many fake turnstiles (counterfelt Turnstiles) on the market. These Turnstiles are often indistinguishable from the real ones, but when used or do not build up enough circumferential pressure so that injured people continue to lose blood. The C-A-T Tourniquet must be wrapped in plastic in the Benelux market and provided with printed instructions with the logo and quality mark of Special Medics. These C-A-T Turnstiles also have a special quality mark. And have a Dutch description!- Size: 4.5 x 17 cm.
- Weight: 70 grams
The CAT Turnstile is available in 3 colours (see other turnstiles in our shop):
- Black
- Orange
- Blue (for training purposes)
-
This Venatorix cap is an indispensable gadget in hunting. Especially for those who sit down in the evening, this cap can be essential, when searching or grazing. With 1 press of the button you activate the five-part LED lighting on the cap. A big plus also remains that the cap is waterproof.- Waterproof
- 5 LEDs
- Technological camo pattern
-
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
This Abbey Camp Sleeping Bag Mummy is pleasant to crawl into on a fresh night and makes camping in a tent a lot more comfortable. The sleeping bag is water-repellent, has a draft edge on the inside along the zipper and a hood with drawstring. All this ensures a comfort rate of approx. 4 degrees Celsius. Comes in a polyester carrying case. Place the sleeping bag on an air mattress and you will see a good night's sleep.- Weight per m²350 gr/m
- StandardsEN14362
Quality 100% polyester Lining 80% polyester/20% cotton stuffing 100% recycled polyester 350 gr/m² Features • Water-repellent, PFC and PFAS free • hood with drawstring • Sturdy 2-sided, polyamide zipper • draught edge on the inside along the zipper • comfort rate approx. 1 degree Celsius • Extreme temperature approx. -21 degrees Celsius • Size approx. 220 x 80/50 cm • Compact pack size sleeping bag approx. 41 x 24 x 23 cm • With two handy hanging loops to let the sleeping bag air out after use or dry after washing • Comes in a handy polyester carrying bag Comfort rate 1°C Color Blue/Anthracite (BAG) -
The Mechanix Wear® 0.5mm M-Pact glove from the Tactical Line is an anatomically shaped all-round glove with a padded wrist rest. Tactical combat glove with incomparable sensitivity. Designed and manufactured to handle the toughest jobs and assignments. The palm is made of 0.5 mm AX-Suede ™ synthetic leather and offers the perfect blend of tactile control and protection at the shooting range. The index finger and thumb have a pure polyester hood with a polyurethane coating for a fine and safe grip. The Lycra® inserts between the fingers guarantee breathability, comfort and freedom of movement. Perfect fit thanks to the elastic glove closure with Velcro and no hooks, so it can no longer get pinched. Material Palm: artificial leather (80% polyester, 18% polyurethane, 2% carbon): hand back: 94% nylon, 6% elastane (spandex); Back of thumb and fingers: 100% polyester; Artificial leather (80% polyester, 18% polyurethane, 2% carbon); Protectors: thermoplastic rubber; Inner lining: 100% polyester. Reviews Certified according to CE EN 388: 2016. Details:- The impact protection of thermoplastic rubber (TPR) on the back of the fingers and knuckles.
- Fingertip protection with thermoplastic rubber (TPR).
- The flat TPR closure ensures a firm fit around the wrist.
- Light TrekDry® adjusts to the back of the hand to reduce heat accumulation and sweat.
- Anatomical stitching seams adapt to the natural curve of the hand and ensure a precise fit.
- Stretchy flexible joints improve the mobility of the shooting fingers.
- 0.5 mm AX-Suede ™ provides an accurate and natural feel.
- Nylon belt.
- You can go in the washing machine.
- Weight: approx. 145 g / pair (size M).
