Tactical Archieven

Savotta Griffin sling LW

€34,90
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features

Two-point sling for lightweight small arms

Full webbing construction, low profile and weight

All metal hardware (steel and aluminium)

Quick loop adjustment slider for grip on webbing

Pulling forward lengthens the sling and moves the support hand forward

Front quick adjustment loop can be adjusted to the desired length

A continuous piece of 25 mm/1" runs through the entire sling

The ends of the sling form 25 mm/1" loops for universal attachment

5-year material and manufacturing warranty

Gemaakt in Finland

Technical features

Weight: 80 g

Length: 185 cm (detached to max. length)

Webbing: 100% polyester

Slider for quick adjustment: aluminum

Buckles: steel
Select options Details
Savotta Griffin sling MW

€44,90
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features

Two-point sling for assault rifles and similar small arms

Thin 35 x 4 mm foam filling with closed cells

All metal hardware (steel and aluminium)

Quick loop adjustment slider for grip on webbing

Pulling forward lengthens the sling and moves the support hand forward

Front quick adjustment loop can be adjusted to the desired length

A continuous piece of 25 mm/1" runs through the entire sling

The ends of the sling form 25 mm/1" loops for universal attachment

5-year material and manufacturing warranty

Gemaakt in Finland

Technical features

Weight: 115 grams

Length: 185 cm (detached to max. length)

Webbing: 100% polyester

Fabric: 500D Cordura (100% polyamide)

Slider for quick adjustment: aluminum

Buckles: steel
Select options Details
Savotta Griffin sling HW

€49,90
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features

Two-point sling for sniper rifles and machine guns

Thick and sturdy foam cushion of 65 x 10 mm with closed cells

All metal hardware (steel and aluminium)

Quick loop adjustment slider for grip on webbing

Pulling forward lengthens the sling and moves the support hand forward

Front quick adjustment loop can be adjusted to the desired length

A continuous piece of 25 mm/1" runs through the entire sling

The ends of the sling form 25 mm/1" loops for universal attachment

5-year material and manufacturing warranty

Gemaakt in Finland

Technical features

Weight: 140 g

Length: 185 cm (detached to max. length)

Webbing: 100% polyester

Fabric: 500D Cordura (100% polyamide)

Slider for quick adjustment: aluminum

Buckles: steel
Select options Details
Savotta Slinghook 25mm

€8,90
After we made the straps, it was decided to also offer a basic model fastener. These are solid quality copies of the German HK's weapon belt fasteners, just like their role models. These are e.g. to a very demanding government customer who is satisfied with them, so it will also be good for you. Functions

Easy-to-use spring-loaded hook buckle for carrying straps

A good quality copy of a certainly great German model

Fits 25 mm wide tape

A belt hook can be attached to another of the same type

2-year warranty against defects in material and workmanship

Made in Taiwan

Technical information

Weight: 24 grams

Dimensions: 50 x 35 x 5 mm

Material: steel
Add to cart Details
Fluna Tec Gun Black

€13,90
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes

Easy to use

Good degree of blacking

Fast results

Application First clean the damaged area thoroughly and degrease it with Fluna GunDegreaser, a degreaser or with alcohol. The damaged area can also be sanded again with sandpaper grain 1000 or with a scouring sponge. Use strong adhesive tape to clearly delineate the repair. Apply Fluna GunBlack thinly with a fine brush or cotton swab and let it dry. Repeat the process several times until the desired degree of blackening is reached. Then neutralize the repair with gun coating, drying and polishing. Finally, treat the repaired area again with Fluna GunCoating. Fluna Gun Black can in principle also be applied to a cloth for larger areas and the area to be treated can then be colored with the cloth by repeatedly sweeping it back and forth.
Add to cart Details
Mechanix Wear T/S element insulated gloves

€37,95
Designed for use in low-temperature environments, Mechanix Wear's Tactical Specialty Element gloves are ultra-lightweight, fleece-lined, water- and wind-resistant precision gloves, perfect for military, law enforcement or outdoor sports. The T/S Element gloves are made of softshell water and wind-repellent stretch fabric, a warm fleece lining on the inside and a durable palm made of synthetic leather for ultimate comfort and protection. In addition, the gloves come with a non-insulated trigger finger for optimal dexterity, TouchTec touchscreen for thumb and forefinger, and a low profile Thermal Plastic Rubber (TPR) Velcro fastener for a good fit on the wrist. Anatomically shaped to the natural curvature of the hand, the Element glove offers excellent hand protection and easy operation for any shooting enthusiast.

Comfortable, breathable and wear-resistant

Tactical special hand protection

Low profile Thermal Plastic Rubber (TPR) Velcro fastener provides a secure fit on the wrist

SoftShell water and wind repellent stretch fabric

Fleece-lined back of the hand provides insulation

Three-dimensional patterns form the natural curvature of the hand

Non-insulated trigger finger ensures optimal dexterity

Durable palm made of synthetic leather

TouchTec touchscreen-compatible thumb and forefinger

Nylon loop with trens stitch helps in putting on the gloves and convenient storage

Can be washed in the washing machine

Perfect for military, law enforcement or shooting sports

Certifications: EN 388

Manufacturer number: TSEL-55
Select options Details
Warrior Assault Systems laser cut elasticated turnstile holder

€27,95
Laser-cut elastic turnstile holder from Warrior Assault Systems for storing a C.A.T. turnstile. The Laser Cut Elasticated Tourniquet Holder is primarily intended for C.A.T. Turnstiles developed, but also fits on an S.O.F.T. Tourniquet, which is tight in the holder. The laser-cut material is made of high-quality composite laminate material. All threads are resistant to powdery mildew, UV light, water, heat and cold. All materials used have the lowest infrared values (99.8%) and are manufactured in the US according to US military specifications. material 500D Cordura®-nylon Details:

One-handed operation.

Elastic bands on the side for compression and a secure grip.

Closing flap with Velcro and reinforced finger loop.

Laser-cut PALS mounting loop for MOLLE system (25 mm).

IRR coating to reduce IR signature.

Dimensions: approx. 11.5 x 4.5 x 3.8 cm.

Weight: approx. 30 g.

Note: The item is delivered without content. The images show only one application example!
Select options Details
5.11 Tactical Maverick Assaulters Belt

€98,95
The 5.11 Tactical Maverick Assaulters Belt is an ergonomic belt with a comfortable, pre-curved design and an AustriAlpin® safety buckle for quick donning and doffing. The Cobra® security lock is patented and ensures the safest use. The lock cannot be opened unilaterally or under load. material

100% nylon

AustriAlpin® safety buckle

Details:

Double layered and firmly sewn webbing.

Velcro to fix the excess length.

Molded design.

Reinforced loop for carabiners.

AustriAlpin® Cobra® safety buckle.

Width: 4.5 cm.

Weight: approx. 235 g (size M).

Size wrench: S/74-84cm, M/84-94cm, L/94-104cm, XL/104-114cm, XXL/114-124cm, 3XL/124-134cm, 4XL/134-144cm. Information under the REACH Regulation In accordance with the REACH Regulation, the Regulation on the Registration, Evaluation, Authorisation and Restriction of Chemicals in the European Union, we inform you that the products used for this product(s) have been used. AUSTRIA ALPINE COBRA snap buckles and/or carabiners are made of brass, i.e. made of copper alloys. The above subcomponents of copper alloys contain lead in quantities of more than 0.1% to a maximum of 0.5% by mass. Title: Lead CAS: 7439-92-1 / EINECS: 231-100-4 The legal classification of hazardous substances, the rules for the safe handling of lead metal and the scope of the products remain unchanged. Products made from copper and copper alloys do not fall within the scope of Regulation (EC) No 1272/2008 of the European Parliament and of the Council on classification, labelling and packaging of substances and mixtures (CLP Regulation) and are therefore not subject to the classification and labelling requirement. As lead is on the REACH candidate list, we hereby comply with our obligation under the REACH Regulation to inform you about this incident.
Select options Details
UF Pro Watch cap

€29,95
The UF PRO Watch Cap with excellent functional features is the perfect headgear for the cold season. Last but not least, the UF PRO® watch cap owes its excellent wearing properties to the excellent functional properties of the fine merino wool/polypropylene mixture from Schoeller® CLIMAYARN®. material Schoeller® CLIMAYARN® (60% merino wool, 40% polypropylene). Details:

cold protection.

Efficient moisture management.

You can go in the washing machine.

Pay attention to size choice: the watch caps fit well and must be ordered a size larger. Weight: approx. 55 g (size L). Made in Europe.
Select options Details
Masters of Gloves Fast rope

€89,95
Fast Rope - MoG 9163 This glove was developed in collaboration with experts from the Dutch Defence. The goal was to develop a glove that provides both maximum protection during fast roping exercises and high tactility for handling weapons in case of interventions. Where most fast roping gloves do not meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm provides excellent grip on both dry and wet ropes and is a great buffer against heat accumulation during fast roping. In addition, handling weapons with these gloves is no longer a theme. Applications

for fast rope work

tested positive for descents up to 90 ft

Attributes

Split leather palm provides excellent grip on both dry and wet ropes and is a great buffer against heat accumulation during fast rope work.

Slim Fit finger construction provides extremely high dexterity for handling ropes, weapons, radio and equipment, and prevents the risk of twisted fingers.

Cutout in crucial places on index finger and thumb for extra flexibility.

Highly durable top layer in split leather that provides safe cut protection and extra padding in the palm of the palm guarantees high protection against friction and heat generation, allowing rope work up to 90 Ft.

Opening for attachment to carabiner.

Stitching at strategic points ensures very high flexibility of the glove.

Extra wide cuff with Velcro closure and reinforcement of the wrist.

Back of the hand in elastic and quick-drying fabric for a breathable, comfortable fit.

Reinforcement of critical areas on/between thumbs and forefinger, for extra protection

Target audience

Defense

Police units (SRT, DSI, DSU, AT, ...)

Bailouts

Sizes

7 - 13
Select options Details
5.11 Tactical TDU Belt 1.75 inch

€18,95

A versatile 5.11 TDU Belt with a width of 44 mm and a flat strap buckle made of plastic that metal detectors do not respond to. material 100% nylon Available in the following sizes: S/Jeans28-30/Length 94cm, M/Jeans31-34/Length 104cm, L/jeans36-38/length 114cm, XL/Jeans40-42/Length 124cm, 2XL/Jeans44-46/Length 134cm.

Select options Details
Not in stock - on order
MIL-TEC US assault pack large tactical black

€49,45
The US Assault Pack Large is a medium-sized, functional daypack with a capacity of 36 liters in stylish tactical black. The backpack is made of waterproof 1000 denier polyester, which is PU-coated on the outside. material

Outer material: 100% polyester 1000 denier, polyurethane coated;

lining: 100% polyester;

Filling: EVA foam (260 or 550 g/m²).

Details:

Padded back with mesh fabric.

Ergonomically shaped, padded shoulder straps, approx. 5 cm wide, adjustable in length.

Eyelets for extra attachment of material.

Length adjustable hip belt with quick release.

Detachable paracord handle with quick release fasteners.

2 large pockets with various zipper and mesh pockets.

Front pocket with organizer and extra zippered pocket.

All pockets with 2-way zippers.

Volume control and luggage attachment with compression straps on the side.

Various Molle attachment points.

Integrated bag with Velcro for drinking bag.

Bungee cord attachment on front pocket with 'Skull' and 'Pineapple' cord stoppers.

Velcro surface for ID patches.

Includes ABS carabiner and removable patch.

Capacity: approx. 36 litres.

Dimensions: ca. 51 x 29 x 28 cm.

Weight: approx. 1,450 g.
Details
Not in stock - on order
UF Pro P-40 Urban Tactical Pants Black

€159,95
"Tacticool" is not always advantageous for covert operations - the P-40 Urban pants are the perfect alternative to stay "low profile". Designed after the popular P-40 pants, the P-40 Urban variant offers excellent freedom of movement, comfortable fit and best-in-class knee protection. Stretch fabric is comfortable, but not inherently well suited for tactical pants. The P-40 Urban Pants has robust and breathable ripstop material combined with advanced stretch material from Schoeller-Textil. The pants remain remarkably durable and stretchy because this hybrid material is placed exactly where you need it most. The P-40 Urban Pants offer knee protection that's so comfortable you won't even notice. Things like a smartphone or other small supplies can be safely stored in the P-40 Urban Pants. Special bags with a unique locking system are available for this purpose. They keep the items safely in place, but provide quick access at any time. material Shell: 67% polyester, 33% ripstop cotton blend; stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% polyamide (CORDURA®). Details:

Pocket configuration: side pockets, safety bag, smartphone pocket with side lock, back pockets.

Double belt loops.

Stretch in the waistband.

Lightweight and breathable ripstop material.

Integrated stretch material in the upper seating area and behind the knees.

Inner knee pockets for UF PRO® knee pads.

CORDURA® reinforcement at the instep.

Double zipper on the front. Inner zipper for WINDSTOPPER® lining.

Weight: approx. 0.75 kg (size 34/34).

Made in Europe.
Details
UF Pro P-40 All-Terrain GEN2 Tactical Trouser Navy Blue

€189,90
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:

Breathable, light polyceny ripstop material.

Raised waistband.

Stretch inserts in the waistband.

Schoeller®-dynamic stretch material in the seating area.

Pull-Fly gulp with double zipper, button-up and clamp hook.

2 hand pockets with Cordura reinforcements for mesclips.

1 zippered safety bag in the left pocket.

2 zippered back pockets and CORDURA® reinforcement.

2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.

2 knife bags with CORDURA® reinforcement.

5 double belt loops reinforced with CORDURA®.

Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).

Ventilation zips on the knees.

With CORDURA® strengthened knee area.

With CORDURA® strengthened instep and knee.

D-ring on the belt loop at the front.

Adjustable hem with boot hook.

Inside zipper for removable WINDSTOPPER® lining (sold separately).

Weight: approx. 880 g (size 34/34). Made in Europe.
Select options Details
Snigel MG Ammunition pouch -09

€60,95
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:

The perfect case to carry ammunition for the SAW/Minimi machine gun

For 200 rounds coupled 5.56 ammunition free of charge or in a cassette

Also suitable for 7.62 coupled ammunition

Can be used for 2 Cal 50 warehouses

Webbing on both sides for attaching small bags

The pouch can be attached to the vest or worn in a shoulder strap (not included)

Specifications:

Article number: 22-00511-09-000

EAN: 7332673301539

Weight: 300 grams

Dimensions: 18 x 19 x 8 cm

Category: Holders & bags

Color: Grey
Add to cart Details
Pentagon tactical 2.0 baseball cap

€14,45
Pentagon Tactical Baseball Cap with velcro patches for friend-enemy identification on front, back and on cap. Six panel cap designed for tactical use. The fixed flap provides good sun protection and the size of the cap can be adjusted with a Velcro on the back. Details:

6 panels construction.

Embroidered ventilation holes.

Preformed peak.

Size adjustable with Velcro.

Velcro surfaces for ID patches on the front, back and crown.

Weight: about 85g
Select options Details