- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Not in stock - on orderA small backpack or pouch for your ballistic plate.
-
Not in stock - on orderWeight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features
- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Not in stock - on orderA small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g
-
Not in stock - on orderA lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm.
-
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch
-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Make an M-Pact® in the field. The next generation of M-Pact tactical gloves protect military and law enforcement professionals with EN 13594 rated impact protection. Take control with 0.8mm synthetic leather and stay connected with touchscreen technology in the palm of your hands. The M-Pact features D3O® palm padding to dissipate high-impact energy and reduce hand fatigue when you’re fully engaged.FEATURES
- Thermoplastic Rubber (TPR) impact protection meets EN 13594 impact standard.
- Thermoplastic Rubber (TPR) pinch-point fingertip protection.
- Thermoplastic Rubber (TPR) closure creates a secure fit to your wrist.
- Breathable TrekDry® keeps your hands cool and comfortable.
- Armortex® palm reinforcement.
- Internal fingertip reinforcement supports extreme abrasion resistance.
- Durable synthetic leather palm infused with touchscreen technology.
- D3O® palm padding absorbs impact and vibration.
- Nylon carrier loops for storage.
- Machine washable.
INTENDED USES- Military
- Law Enforcement
- Shooting Sports
- Maintenance & Repair
-
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Long and narrow gear like flashlights and other similar items. Dimensions: H = 15 cm, W = 4 cm, D = 3 cm Weight: 50 g.
-
A very small lightweight general purpose pouch with a wide opening top zipper.
- It opens on 3 sides for an easy access to the contents of the pouch.
- The zipper is semi stiffened to be easier to open and close.
- Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
- Inside loops for securing the contents.
- Bottom drain hole.
- Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
- This system makes it possible to attach the pouch without removing other pouches from the belt.
- Fits inside: Radio, field dressing, small binoculars or other similar sized items.
- Measurements: L= 19, W= 8 & D= 4
- Weight: 100 g
- Volume: 1L
-
A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment
-
Weight: 50 g Dimensions: L= 14, W= 8 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a large bunch of keys and keeps them from rattling
-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves
-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
Not in stock - on orderA band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g
-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included.
-
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.
- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
Not in stock - on orderFeatures:
- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas