-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included.
-
Not in stock - on orderA tight-fitting flame retardant hat that can be used under a helmet. Lightweight and thin to be comfortable in most situations, yet warm enough to protect from the cold. Flatlock seams for more firmness. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane
-
Not in stock - on orderWeight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features
- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:A simple glove keeper to carry gloves on the belt
-
Fits most gloves
-
3 press button adjustment for different sized gloves
-
Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
-
Light weight
-
-
Not in stock - on orderA tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment
-
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Long and narrow gear like flashlights and other similar items. Dimensions: H = 15 cm, W = 4 cm, D = 3 cm Weight: 50 g.
-
A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment
-
Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking
-
In the folded position the padded front of the pouch protects the GPS from shocks
-
The open mode makes it possible to walk and look at you GPS without removing it from the pouch
-
An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
-
On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
-
There are also Velcro straps for attaching the pouch on a carrier strap
-
Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
-
-
A versatile, light and easy to use pouch for different kinds of grenades which is simple, quiet and easy to access. tab to open the lid. You can now easily grab a grenadeWeight: 90 g Dimensions: L= 14, W= 9 & D=7 Volum= 0,6L Fits in: Grenades, smoke grenade, 2x40 mm grenades, field dressing, GPS, compass or other small items Features:
- Attaches with the tuck back system to the equipment vest
- Pull the large tab to open the flap
-
The tab is designed to be easy to use with gloves on
-
The grenade pouch attaches safely on both belt and vest. A grenade sits safely in the pouch with the lid closed
-
The lid closes securely with two press buttons for double safety. An elastic band keeps the grenade in place while the lid is open
-
There are three positions for the press buttons to accommodate small or large grenades
- The elastic holds any possible movable parts of the grenade in place so that they do not make any noise or rattle
-
Weight: 50 g Dimensions: L= 14, W= 11 & D= 2,5 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt
-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Weight: 50 g Dimensions: L= 14, W= 8 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a large bunch of keys and keeps them from rattling
-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Not in stock - on orderA safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg It fits well on your belt. A firm and ventilated spot on your leg for one to four pouches. Mesh, perforated plastic film and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure attach the leg plate to your leg. Quick release buckle with swivel function attaches the leg plate to your belt. The leg attachment plate is soft and barely palpable while wearing. The leg straps are elastic to sit tight and comfortable. It is suitable for most pouches and holders in our system. It does not absorb water and does not gain heavier when wet. One size fits everyone. Fits: Pistol holster and all kinds of pouches Beware: Belts and equipment belts Weight: 300g
-
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.
- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
A 50 mm wide belt that can be used in many ways. To wear any pouch around your shoulders or waist. Like a hip belt on backpacks. As a light combat belt. A 40 mm garter oiler. 50 mm band and 25 mm tyres with 40 mm wide MOLLE openings, vertically on one side of the 50 mm band and horizontal on the other. A double adjustable buckle on the side closes the sling.
-
Not in stock - on orderFeatures:
- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:
-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
Not in stock - on orderWeight: 60 g Dimensions: L= 9, W= 8 & D= 3 cm Fits in: 1x Accuracy International L96A1 AW magazine Fits on: Equipment vest, leg platform and the specialist backpack Features:Safe storage, fast access and light weight
-
Stores 1 x 9 round, 7,62magazine for the Accuracy International L96A1 AW rifle
-
Low cut front for fast access
-
Flap for dirt protection
-
2 press buttons to close the flap
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 80 g Dimensions: L= 17, W= 6, D= 3 cm Fits in: Most handheld radios Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:The pouch for many different radios
-
Low cut construction to leave the speaker free
-
Padded to protect your radio
-
Elastic cord with Velcro closure to fit most radios on the market
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt.
- The -15 model has an opening in the bottom for a connector.
-
-
Weight: 50 g Dimensions: L= 13, W= 7 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a bunch of keys and keeps them from rattling
-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
The belt to use for carrying something heavy
- Reinforced with a semi rigid plastic sheet
- It supports the load, does not twist or sag and remains comfortable
- Adjustable from 84cm to 110 cm waist
- Swivel buckle and Velcro adjustment
- Channel for cable ties
Fits in: All pouches, holsters and drop leg holdersFits on: Most bodiesWeight: 90 gDimensions: 84- 110 cm -
- The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic string closure in the top is fast and easy to open. It is threaded through an eye let further down than normal, this makes it easier to fold the elastic string to the side when you want to remove the magazine fast.
- The pull tab is designed to work with magazines with an angled bottom.
- The universal flap, 25-00007-00-000 can be attached on the magazine pouch. The flap has a silent hook opening that is easy and fast to use. Low cut to make it faster to remove the magazine. Inside Velcro patches were small holders for pistol magazines or grenades can be attached 25 mm MOLLE bands on the outside so you can attach other pouches on the outside. Two or more magazine pouches can be attached outside each other. Eyelet in the bottom to let water out. Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt.
- The attachment systems is easy to use both on standard 25 mm MOLLE systems as well as on the Swedish 20 mm system or on 50 or 60 mm belts.
- The dual holder insert -12, 25-00307-09-000 can be used to hold smaller magazines inside the short speed magazine pouch -12. The insert has 2 elastic holders with adjustable length bottom.
- Stores: 1 x G36 or other 1 x 5,56 or 1 x HK417 magazine or radio, pistol etc.
- Dimensions: W=8 x H=11 x D=3 cm.
-
Features:The bag for shotgun ammunition
-
Carried on your leg for easy access to a bag full of shotgun cartriges
-
Elastic mesh top for easy access and semi secure storage
-
Flap opens up out so it won´t block the access to the ammunition
-
Flap with velcro closure to really secure the contents of the bag
-
Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.
-
-
A small zippered pocket on the front for papers, pens etc.
- MOLLE tires at the front.
- Velcro-covered exterior where you can attach a patch.
- Window on the inside for cards or notes.
- Inside elastic compartments for pens or papers.
- Tuck in fastening system makes it possible to attach the bag to any equipment vest or belt.
- The new version, 21-00309B is 4 cm wider and has a compass compartment on the back.
- Weight:110 g
- Dimensions:16 × 14 × 1 cm
-
Weight: 200 g Dimensions: L= 17 & W= 17 Fits on it: All types of pouches Fits on: Trouser belts and equipment belts Features:A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg
-
It fits securely on your belt. Double layers of modular webbing where pouches can be securely attached
-
The leg attachment plate is soft and can hardly be felt when worn
-
It weighs only 200 g
-
The leg straps are elastic to sit tight and comfortably
-
It is suitable for most pouches and holders in our system
-
It does not soak up water and will not be heavier when wet
-
-
Weight: 100 g Dimensions: L= 23, W= 9 & D= 4 Fits in: 1 MP5 magazine or telescopic baton Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:Very fast access to your submachine gun magazine
-
Stores one magazine or telescopic baton
-
Store the magazine with the top up, pull it and insert it with one smooth movement- It can't be done faster
-
Elastic band keeps the content secure when the flap is open
-
Flap for added security when fast roping or similar
-
Velcro Vertical/Horizontal attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g
-
Not in stock - on orderWeight: 40 g Dimensions: L= 11, W= 9 & D= 2 Fits in: Handcuffs - only classic model with chain ! Fits on: Equipment vest, belt, leg plate or leg attachment Features:A light weight pouch for handcuffs which is are flexible and can be used on the duty belt or covertly. The pouch is designed to be small, lightweight, flexible and to comfortably hold your handcuffs
-
Open top for lowest weight
-
The pouch can easily be opened with one hand
-
It sits comfortably mounted on the belt and can be closed with the press button
-
The weight is only 15 grams. The material does not retain water so is no heavier if wet
-
Can be attached without removing items from the duty belt
-
Use the velcro strap on the back to attach the holder to the duty belt. You can open and attach it to the outer belt without removing other pouches
- Open the straps and thread them around the belt and close it with the velcro straps.
-
-
A small, lightweight, safe and flexible pouch for your first aid kit
- The bag is closed with Velcro. Pull the strap to open the pouch (can be used with gloves).
- You can attach the pouch to all our carriers. It can be attached with the flap up or down.
- The bag does not absorb water and does not gain weight in rain
- The eye in the bottom of the bag may oms water
- The fastening system with snaps makes it possible to attach the pocket to any equipment vest or belt
-
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt
-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
This versatile and high-tech long-sleeved undershirt is perfect for changing conditions. Suitable for professional and leisure use all year round, this tight-fitting design has a round neckline and fitted sleeves. The hem is also longer on the back for extra comfort. This shirt is specially designed for hunters, hikers and all other backpack carriers: there is a smooth knit on the shoulders so that the strap does not rub or press. This is a very popular shirt among hunters and motorcyclists, but is suitable for all types of hobbies on land, on water or in the air. Technology The material is made of a very supple and skin-friendly silver ionized polypropylene mesh. The loops of the knitwear store air which then adapts to the body temperature and compensates for any fluctuations in the ambient temperature. Polypropylene does not absorb moisture, but wicks it away from the skin, so it always stays dry. Silver ionization prevents the growth of bacteria, so that the garment remains odorless and fresh for longer. The treatment is carried out at the manufacturing stage in the core of the fiber, so that the garment retains its properties throughout its life cycle. All seams are sewn flat so that the product is comfortable to wear and does not press or rub on the skin. Maintenance Wash at 60°C. We recommend washing the garment in a laundry bag to prevent the mesh fabric from sticking to the zippers/etc of other clothes. If you hang the garment outside between two washes and let it air for a while, you don't need to wash it as often.
-
Not in stock - on orderThe Swiss Eye Raptor black is a lovely seated pair of glasses for airsofting. It's one of the most popular eyewear to airsoft for a reason. It protects the eyes and is suitable for mounting a insert for glasses wearers. The glasses have polycarbanate lenses with an anti-fog and anti-scratch coating and give 100% protection against UVA, UVB and UVC up to 400 nanometers. The glasses come with an orange, tranparante and dark lens so you can adjust the glasses to the conditions. The glasses come in a microfibre bag. Specifications of the SwissEye Raptor black:
- Adjustable legs
- Anti-fog / anti-scratch coating
- 100% UVA, UVB and UVC protection up to 400 nm (nanometer)
- Removable clip adapter for glazing (optional, not included)
- Orange, transparent and dark lenses
- Microfibre carrier bag
- EN 1836:2005 + A1:2007
- ANSI Z87.1 2003
- STANAG 2920
- EN 166:2001