• Een klein, lichtgewicht, veilig en flexibel etui voor uw EHBO-doos
    • Het zakje wordt gesloten met klittenband. Trek aan de riem om het zakje te openen (kan met handschoenen worden gebruikt).
    • Je kunt de pouch op al onze dragers bevestigen. Het kan worden bevestigd met de flap naar boven of naar beneden.
    • Het zakje neemt geen water op en wordt niet zwaarder bij regen
    • Het oogje in de bodem van het zakje laat eventueel water weg
    • Het bevestigingssysteem met drukknopen maakt het mogelijk om het zakje aan elk uitrustingsvest of riem te bevestigen
    Past bij: 1 veldverband, 1 tourniquet en 1 elastisch verband of persoonlijke uitrusting Past op: Dienstriem, beenplatform, uitrustingsvest en aan de broekriem *Medische uitrusting niet inbegrepen !
  • Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:
    An elastic glove keeper to carry gloves on the belt
    • Fits most gloves
    • Threads onto the equipment belt
    • Velcro closure
    • Light weight
  • Deze telescopische wapenstokhouder kan verticaal of horizontaal aan onze uitrustingsriem of uitrustingsvest worden bevestigd. Het kan ook verborgen aan uw broekriem worden gedragen. Past op de meeste telescopische wapenstokken. Grote opening in de bovenkant om de wapenstok na gebruik gemakkelijk in te brengen. Elastische lus om de wapenstok vast te zetten. De onderkant heeft een opening om een verlengde wapenstok in te steken. De opening kan worden gesloten met een flap met drukknop. Terugvouwbevestigingssysteem maakt het mogelijk de etui aan elk uitrustingsvest of riem te bevestigen. Afmetingen: L= 20, B= 5 & D= 6 Past in: Telescopische wapenstok Past op: Uitrusting vest, riem, beenplaat of beenbevestiging
  • Features:
    The bag for shotgun ammunition
    • Carried on your leg for easy access to a bag full of shotgun cartriges
    • Elastic mesh top for easy access and semi secure storage
    • Flap opens up out so it won´t block the access to the ammunition
    • Flap with velcro closure to really secure the contents of the bag
    • Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.
    Weight: 160 g Dimensions: H22 x W18 x D8 cm Fits: >30 shotgun shells Fits on: Equipment vest or on a leg platform
  • Het perfecte kleine zakje om je lege magazijnen in te doen tijdens een vuurgevecht. Ook goed om handschoenen, gehoorbeschermers, enz. in op te bergen. Gebruik het om bewijsmateriaal of andere belangrijke dingen te bewaren tijdens een inval. In principe is de buidel ontworpen om tijdelijk dingen te dragen die je niet in je handen wilt hebben. Opgerold in de bodem van het vest. Trek de vierkante ring naar beneden, op de natuurlijke manier, wanneer je de buidel wilt openen. Rits gesloten bovenkant. De flap kan aan de binnenkant van de etui worden opengemaakt. Biedt plaats aan 4 tijdschriften. Eigenschappen: Gewicht: 160 g Afmetingen:24 × 16 × 9 cm Kleur: Grijs
    • The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic string closure in the top is fast and easy to open. It is threaded through an eye let further down than normal, this makes it easier to fold the elastic string to the side when you want to remove the magazine fast.
    • The pull tab is designed to work with magazines with an angled bottom.
    • The universal flap, 25-00007-00-000 can be attached on the magazine pouch. The flap has a silent hook opening that is easy and fast to use. Low cut to make it faster to remove the magazine. Inside Velcro patches were small holders for pistol magazines or grenades can be attached 25 mm MOLLE bands on the outside so you can attach other pouches on the outside. Two or more magazine pouches can be attached outside each other. Eyelet in the bottom to let water out. Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt.
    • The attachment systems is easy to use both on standard 25 mm MOLLE systems as well as on the Swedish 20 mm system or on 50 or 60 mm belts.
    • The dual holder insert -12, 25-00307-09-000 can be used to hold smaller magazines inside the short speed magazine pouch -12. The insert has 2 elastic holders with adjustable length bottom.
    • Stores: 1 x G36 or other 1 x 5,56 or 1 x HK417 magazine or radio, pistol etc.
    • Dimensions: W=8 x H=11 x D=3 cm.
    Weight: 70 g.
  • Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:
    A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt
    • The pouch is securely attached to the belt or vest
    • elcro closed flap.
    • The Velcro patch makes it possible to fast and easy close the pouch
    • The pouch will not absorb water, will not rot or get soft in the rain
    • Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
  • Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:
    A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking
    • In the folded position the padded front of the pouch protects the GPS from shocks
    • The open mode makes it possible to walk and look at you GPS without removing it from the pouch
    • An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
    • On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
    • There are also Velcro straps for attaching the pouch on a carrier strap
    • Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
  • SnigelDesign 12×19 pouch -16

    32,9044,00
    A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to  attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside.
  • Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:
    A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt
    • The pouch is securely attached to the belt or vest
    • Fits normal and large handcuffs
    • Press button closure with Velcro patch
    • The Velcro patch makes it possible to fast and easy close the pouch
    • The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
    • The pouch will not absorb water, will not rot or get soft in the rain
    • Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
  • Niet op voorraad - op bestelling
    A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5
  • Niet op voorraad - op bestelling
    For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g
  • Niet op voorraad - op bestelling
    A small backpack or pouch for your ballistic plate.
    • Can hold one ballistic panel & plate and one hydration system.
    • Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
    • MOLLE bands on the outside so you can attach other pouches on it.
    • Velcro patches on the front  for name and unit signs.
    • The bottom of the plate carrier can be opened to insert plates, panels and bladders..
    • Velcro secured openings in the top for cables or a hydration tube.
    Dimensions: L=36 & W=31 cm Weight: 240 g
  • Niet op voorraad - op bestelling
    Weight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features
    • A convenient bag for a gas mask.
    • Carried on the leg or the left rear of the ballistic or equipment vest.
    • Easy to open flap that even can be used if the bag is attached on the back of the vest.
    • Inner pocket for gloves and other protective equipment.
    • The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
  • Niet op voorraad - op bestelling

    SnigelDesign Carrier pouch DF -12

    119,00169,00
    A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front  for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g
  • Niet op voorraad - op bestelling
    A lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm.
Ga naar de bovenkant