-
Not in stock - on order
The Warrior Assault System Single 5.56mm Open Mag Pouch is designed to be able to change magazines quickly, the plastic material inside also prevents the magazine from falling out, This allows the pouch to be used with or without elastic safety, 2 Molleband loops allow the attachment of an extra bag, for the following magazines: 5.56 mm M4, SA80 (not for G36). Dimensions: approx. 7 x 2 x 13.5 cm (LxWxH), Weight approx. 90 g. The WAS equipment bags are equipped with a Molle locking system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications. -
Not in stock - on order
A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g. -
Weight: 80 g Dimensions: L= 17, W= 6, D= 3 cm Fits in: Most handheld radios Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:The pouch for many different radios-
Low cut construction to leave the speaker free
-
Padded to protect your radio
-
Elastic cord with Velcro closure to fit most radios on the market
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt.
- The -15 model has an opening in the bottom for a connector.
-
-
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties- Three sizes: 10×15, 15×20 and 20×30 cm
- Translucent mesh material
- Zipper from corner to corner
- Two 25 mm wide webbing loops in the corners
- Color options for easy recognition
- Velcro fastener (hook back) or plain (stand-alone)
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
- Main material: 100% polyester
- Webbing: 100% polyester
-
Not in stock - on order
The Warrior single 7.62 mm open shorts is a great universal Open Mag Pouch that can hold a single SCAR H (7.62 mm x 51 mm) Mag. It can also contain a warehouse for an SR25 G3 or M14. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE. -
Designed to integrate seamlessly with webbing/MOLLE systems on plate carriers, bags, belts, and more, the MoG glove holder offers unparalleled versatility. Keep your gloves securely in place with the choice of a reliable hook-and-loop closure or a sturdy key ring. This pouch is not only for gloves, but also a true multi-purpose holder, perfect for organizing and carrying ropes, keys, a flashlight, or other essential accessories. Upgrade your gear with the MoG Glove Holder - your solution for convenience and functionality. Main features :- Durable webbing with adjustable hook-and-loop fasteners for both belt and glove holders, keeping out dirt and sand
- Easy-to-open glove holder thanks to the additional pull strip
- Universal hook and loop system, perfect for easy attachment to plate carriers, backpacks and all belt systems
- Strong and durable steel carabiners - multifunctional system for gloves, keys and other equipment
- All black
- Coyote Brown
-
The Agilite Tourniquet Holder is an elastic TQ holder that attaches to your Plate Carrier, Battle Belt or other equipment via hook and loop. It has inner mil-specification elastic to hold a turnstile tightly while at hand. An additional Cordura outer layer protects it from abrasion and the elements in demanding environments. The TQ holder has a laser cut loop for ID Patches with the IDF "O" symbol for fast turnstile identification. It also has an eyelet to fasten your turnstile so you never lose it. Sizing The Agilite TQ holder can be attached to any surface with loop, including: Plate carriers, combat straps and chest harnesses. Specs- 500D Cordura Mil Spec Elastic webbing
- Width: 4.9" Height: 4.5"
- Weight: 0.6 oz
-
With the smart features of the 5.11 Tactical Flex Admin Pouch, you can store your tools organized and safely. In addition, it can be attached to all platforms with the Flex-HT™ Mounting System's 1/2" webbing ladder and 3/4" TPU coated straps. Dimensions 11.4 x 15.8 x 2.5 cm Attributes- Minimalistic, low profile and lightweight admin pouch
- Horizontally oriented laser cut MOLLE loop platform
- Main compartment with zipper and shock cord for adjustable opening factor up to 180 degrees
- Drawstring with heat shrink tubing and a paracord loop trigger holder
- 2 small and 1 large mud bag on the back panel with elastic bands
- Adjustable bungee cord on front panel for phone or other accessories
- Extra slip bag behind front panel
- Flex-HT™ 1/2" webbing ladder for more weaving possibilities
- Flex-HT™ 3/4" TPU coated strap for flexibility on all weaving platforms
- Pull tab for quick detachment of Flex-HT™ straps
- Flex Hook Adaptors convert the bag to a hook/loop attachment (2 included)
- Double layer water resistant 500D Nyl
-
Not in stock - on order
The Fanny Pack Conversion Strap connects to the Agilite Six Pack™ in seconds and turns it into a tactical fanny pack for everyday use. *Fanny Pack not included, images only as an example. -
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. Examples of use As a fairly small pouch with only four liters of capacity, no big things fit in here, but this also makes them very suitable for use on small backpacks with limited height / width on the sides. Here are some examples of what will fit in such a bag:- A medium-sized tarp and accessories
- A lightweight puffy jacket, rain suit or poncho
- A regular 1.5 liter bottle, and some other stuff
- An isolated food pot of 0.7 liters
- A Jetboil burner and a gas cartridge
- Capacity approx. 4 litres
- Covered zipper
- Vertical front signalling loops for compression straps
- Internal D-ring for securing small items
- Internal flat rear compartment
- Reinforced bottom and sides
- PALS-compatible mounting system
- Water drainage tulip at the bottom
- 5-year warranty on material and craftsmanship
- Made in Finland/Estonia
- Weight: 200 g
- Dimensions: 13 x 30 x 9 cm (W x L x D)
- Main material: 500D Cordura (100% polyamide)
- Lining: 210D polyamide
- Webbing: 100% polyester
-
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties- Three sizes: 10×15, 15×20 and 20×30 cm
- Translucent mesh material
- Zipper from corner to corner
- Two 25 mm wide webbing loops in the corners
- Color options for easy recognition
- Velcro fastener (hook back) or plain (stand-alone)
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
- Main material: 100% polyester
- Webbing: 100% polyester
-
The Condor Micro Dump Pouch is a rollable universal pouch for empty mags, shotgun shells or other utensils. Suitable for 8 pieces of 5.56 NATO STANAG mags. Material 100% Polyester. data:- Small to fold.
- Large opening with elastic drawstring and pull stoppers for adjusting the width.
- Mesh bottom.
- 2 removable PALS fasteners for the MOLLE system (25 mm).
- Dimensions folded: 10 x 10 x 4 cm.
- Dimensions open: approx. 27 x 25 cm.
- Weight: approx. 140 g.
-
The Single Quick Mag is a versatile multifunction loader bag that can hold a variety of 5.56mm warehouses, including P-Mags. The Quick Mag Pouch from Warrior Assault Systems can also contain 7.62 mm x 39 mm AK mags M14 FAL etc. The size can be adjusted by means of a laced elastic cord that is strung through the side of the bag. Comes with optional bungee retention tabs as seen on the Warrior Assault Systems Open Mag bags for operators who need extra security from their warehouses. -
A versatile, light and easy to use pouch for different kinds of grenades which is simple, quiet and easy to access. tab to open the lid. You can now easily grab a grenadeWeight: 90 g Dimensions: L= 14, W= 9 & D=7 Volum= 0,6L Fits in: Grenades, smoke grenade, 2x40 mm grenades, field dressing, GPS, compass or other small items Features:- Attaches with the tuck back system to the equipment vest
- Pull the large tab to open the flap
-
The tab is designed to be easy to use with gloves on
-
The grenade pouch attaches safely on both belt and vest. A grenade sits safely in the pouch with the lid closed
-
The lid closes securely with two press buttons for double safety. An elastic band keeps the grenade in place while the lid is open
-
There are three positions for the press buttons to accommodate small or large grenades
- The elastic holds any possible movable parts of the grenade in place so that they do not make any noise or rattle
-
Weight: 100 g Dimensions: L= 23, W= 9 & D= 4 Fits in: 1 MP5 magazine or telescopic baton Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:Very fast access to your submachine gun magazine-
Stores one magazine or telescopic baton
-
Store the magazine with the top up, pull it and insert it with one smooth movement- It can't be done faster
-
Elastic band keeps the content secure when the flap is open
-
Flap for added security when fast roping or similar
-
Velcro Vertical/Horizontal attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
