-
Not in stock - on order
The RPC is the latest evolution of Warrior Assault Systems carriers. Designed as a lightweight and versatile low-profile wearer that offers enhanced mobility without sacrificing protection. The RPC is designed to make medium and large SAPI and ESAPI stand-alone s and the most common 10" x 12" I.C.W.s available. The bags are supported with 3D mesh for added ballistic performance comfort and body heat removal. The Recon carrier comes standard with ladder-style tummy straps that are attached to the front of the RPC via 2 removable ITW SR clips. This allows for quick access when entering and disembarking the RPC (ITW SR clips have a combined breaking strength of 600 lbs per side). The shoulders of the RPC can be worn in 3 different configurations as a smooth low profile with the addition of Velcro-lined shoulders and wrap around the sleeve for hydration and communication. The RPC comes standard with a removable MOLLE front cover held in place by 2 vertical SQM clips and strong Velcro, allowing the panel to be removed and replaced with a wide range of preconfigured weapon-specific pouch panels and Warrior's new Pathfinder Chest Rig. The RPC can be integrated with Warrior's new rear panel Made of high-quality fabric -
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
Features:- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
Not in stock - on order
The Mil-Tec Plate Carrier Vest Gen. II is a ballistic protection plate insert with modular webbing on the front, back and side of the vest. With this plate carrier, the abdominal band can be omitted, resulting in a light and flexible plate carrier that is closed by a belt with a Fastex buckle. Material 100% polyester (Oxford) polyvinyl chloride coated shoulder straps: 100% thermoplastic elastomers Details:- Molle loop system on the front and back, as well as on the side straps
- 3 rubber loops on the front for attaching equipment
- Small pocket with Velcro at the front
- 3 Velcro strips on the front for attaching patches
- Full front opening of the vest with 3 large, strong Velcro closures
- Shoulder straps can be opened with Velcro
- The vest can be quickly put on and off thanks to the elastic band system on the back
- Front and rear plate ceramics level III and IV can be used
- Internal belt holder for ceramic plates 25 x 30 cm.
- Weight: about 930 grams
-
The MX042 plate carrier is the MX version of the well-known LT042/II plate carrier. It is fully MOLLE/PALS compatible thanks to laser cuts on the front and back. The Multiaxial laminate not only reduces weight, but also reduces water absorption compared to webbing sheet carriers. Quick to detach and attach It is equipped with our patented hook buckle on the shoulder and waist straps. This allows the plate carrier to be lowered in seconds, whether it is an injury, a fall into the water, or a change in the hazard or operational situation. A strong tug in any direction will suffice. It can be removed quickly. Integrated admin tray The plate carrier has an integrated administrative pocket under the fleece surface on the front. The inside of the bag is equipped with elastic loops for sorting and and attachment of smaller attachments. Compatible with a variety of plate sizes The MX042 plate carrier is available in sizes M and L, each suitable for the plate sizes SAPI M and SAPI L. The plate is inserted from below and held firmly in place by the plate carrier. The plate is inserted from below and held firmly in place by the plate attachment strap. Smaller or specially shaped plates (e.g. Swimmers Cut) are also held firmly in the correct position with the help of the fastening strap. Additional Velcro pockets (e.g. MX174, LT112, LT104) can be attached to the Velcro fastener of the plate. An extra strap makes it easier to open the record compartment. Easy waist belt adjustment The three-row skeletonized waist belt can be individually adjusted, even when secured thanks to a lacing system and a cord stopper. Two different cord thicknesses are included in the scope of delivery. These offer varying levels of resistance and flexibility to adapt to needs and changing clothing under the plate carrier (jacket vs. field shirt). Narrow shoulder strap The shoulder strap of the plate carrier can be adjusted with a Velcro fastener, allowing adjustment even when the carrier is on. The narrow 25 mm Hook buckle on the shoulder straps provides the user with more space for attaching a shoulder rest. There are also MOLLE/PALS slots on the shoulder strap, which can be used for cable management or attaching additional pockets. Fleece surfaces inside and outside Patches can be attached to the fleece panels at the top of the front and back for personalisation and labelling. In addition fleece panels on the inside of the plate carrier for attaching padding (e.g. LT250) or additional pockets (e.g. MX634 radio bag or LT241 turnstile holder). Quick to set up and convert Our MX042 plate carrier can be quickly and flexibly adapted to different situations and tasks. It has a large fleece surface on the front for front panels (MX231 & MX234), which can be fastened with a buckle or via a Velcro loop. Alternatively, breastplate (e.g. MX266) or micro rigs (MX886/MX887) can also be attached here. Furthermore, the plate carrier is compatible with LHT backpacks thanks to loops on the waist and shoulder strap. Zipper panels (LT632 and LT400/II) can be quickly and easily attached to the zippers on the back. Intelligent cable management The MX042 plate carrier provides an intelligent cable management system that enables the organized routing of cables and drinking tubes. Thanks to the Seams, which can be opened at the front and back, can be routed cables through the plate compartments. This means that the cables do not protrude and Damage or obstructions, e.g. when changing magazines, are avoided. The front section also has back-to-back loops for cable routing Product Details- Fully modular panel carrier
- Made of ultra-light MX multi-axis laminate
- Standard MOLLE laser cuts on the entire front and back
- 3 back-to-back loops on the front for organized cable management
- Divisible bar seams for cable routing
- Zippers on the back for attaching zipper panels (CP compatible)
- - Velcro fleece surface on the front and back
- Fleece panels with Velcro on the inside
- Size M shoulder straps with slim, patented 25mm hook buckle
- MOLLE slots on the shoulder straps (for cable management and extra pockets; length adjustment possible with Velcro fleece closure)
- Loops on the shoulder and sternum straps compatible with Lindnerhof Taktik backpacks (e.g. HL334 backpack)
- Skeleton waist belt: 3-row with 10 MOLLE slots each
- Hip belt with patented hook buckle
- Size adjustment with elastic cord
- SAPI L plate size (and SAPI M or NATO standard by using the plate belt)
- Attachment of a breastplate (e.g. MX266 + RMPL144) possible
- Multi-Axis Laminate MX
- Approx. 700g
- 1 front part
- 1 back panel
- 1 pair of shoulder straps (size M)
- 1 waist belt (3-row with 10 MOLLE slots each)
- 1 elastic cord (3mm)
- 1 elastic cord (5mm)
- 1 cord stopper
-
The LT042/2 plate carrier is a modern, multi-purpose plate carrier made of CORDURA® Advanced Fabric and webbing - a tried and tested combination of materials. Advanced Fabric and webbing - a tried and tested combination of materials. A reliable partner for transporting your sheets and equipment The LT042/2 plate carrier is the second generation of the LT042 model. Like its predecessor, the LT042/2 is based on a well-thought-out design and made from an intelligent mix of proven materials, including the new MX multiaxial laminate in the shoulder and hip straps. The straps on the front and rear of the carrier have been reduced from 25mm to 20mm to save more weight without compromising stability. And as with the LT042, all MOLLE/PALS compatible pouches can be attached. Light or heavy load, the LT042/2 carries your decision with it With the help of the zippers on the back, you can quickly, easily and silently attach modular zipper panels from Lindnerhof and even attach a Lindnerhof backpack if necessary. The zippers are compatible with most systems from other manufacturers (e.g. Crye). A large Velcro pad on the front of the carrier allows modular panels and breasts to be securely attached. The Velcro fasteners on the inside of the carrier allow you to add extra pockets and padding e.g. the Lindnerhof internal padding (dragon shape or LT250), Velcro® side pockets (HL175, MX634) and Velcro® back pockets (MX174, LT104). Together, they make the LT042/2 – a smart solution for storing gear, whether you want to carry light or heavy luggage, breaker tools or extra gear for your mission. Cable Management - Hidden & Custom On the front panel of the LT042/2 there are three consecutive cable attachments. You can attach cables or a drinking tube to this. Longer Cables can also be routed directly through the plate compartment via three user-separable closing seams on the sides and at the top of the plate compartment (For example, if you cut open one of the seams in the middle, you can route the radio cable coming from a hip radio from a hip-mounted radio to the headset). On and off in the blink of an eye Our patented hook buckle is a classic quick-release system that is also designed to be quick, easy, silent, and in different directions as needed. The LT042/2 comes with our extra narrow 25mm hook buckles for the shoulder strap. They are so narrow that they won't interfere with your weapon system, but are just as secure and stable as conventional hook buckles. Panels of different sizes fit in one compartment The plate compartment of the LT042 is designed for an SAPI L plate. Thanks to the integrated plate holder belt, you can also use smaller plates (SAPI M or NATO standard 25x30 cm) be attached. Product Details:- Fully modular plate carrier
- Standard MOLLE/PALS fabric, full front and back
- Shoulder straps and skeletonized, double 3-row hip belt made of multiaxial MXLaminate
- Loops for cable routing
- Patch Areas
- MOLLE slots on the shoulder straps (for cable management and turnstiles; length adjustment possible via Velcro)
- Extra slim, patented 25 mm hook buckle on the shoulder straps
- Loops on the shoulder straps, compatible with Lindnerhof tactical backpacks (HL334 Modular Backpack System 10L)
- Zippered pockets (Crye compatible)
- 20-row belt (fastening with elastic cord on the back)
- Shoulder straps size M
- SAPI L plate size (and SAPI M or NATO standard by using the plate plate mounting strap)
- Separable bar seams for cable routing
- Additional equipment: LT250 inner lining, HL175 Velcro® side pocket, HL105 shoulder pad, HL334 backpack, LT632 zipper panel
- L (SAPI)
- 1 front piece
- 1 back panel
- 1 pair of shoulder straps (size M)
- 1 skeleton waist belt (3 rows)
- 1 elastic cord (3 mm)
- 1 elastic cord (5 mm)
- Cord stopper
-
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
-
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge.
*Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter.
Specs
Compatible with FirstSpear Tubes® and other quick-release fasteners
Dimensions:
M: 57*14*1cm(22.5*5.5*0.5 inches)
L: 25*5.5*0.5 inches (64*14*1cm)
XL: 28*5.5*0.5 inch(72*14*1cm)
Weight:
M: 126gr
L: 140gr
XL: 152gr
Materials:
- Laser cut Velcro overlay panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
- CURV® thermoplastic composite material
-
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:- Mil Spec 1000d tactical nylon
- Includes Agilite polymer handle
- Made in Israel
-
With the Agilite Molle Placard you can easily expand your plate carrier with molle rows. The back of the placard consists of velcro and 2 G-hooks. -
Optimized to hang the MD2 Compact Trauma Kit or other Trauma kits on the bottom of your plate carrier. Also functions as a side wing under your cummerbund, providing an internal attachment option for MOLLE pockets such as magazine bags or radio pockets. The QD grommet slots offer the convenience of side mounting the hanger, even when using quick-release buckles such as TubesTM or 2M ROC buckles. MD2 Compact Trauma Kit not included. Content for illustrative purposes only. -
Not in stock - on order
The Agilite MD2™ is a smart, compact trauma kit designed for superior uptime and performance. It contains essential life-saving medical supplies and has an exceptionally low profile.- Fast, ambidextrous deployment.
- Integrated External Combat Turnstile Holder
- External 6" trauma scissor holder.
- Micro MOLLE attachment optimized for combat belts.
- Optional mounting for plate carrier (sold separately).
- Internal organization with 4 pockets and space for a decompression needle or marker.
