-
Een grijze en zwarte patch met de hondenkop en de tekst K9. 70 mm. Klittenband aan de achterkant zodat de patch bevestigd kan worden op klittenbandvlakken van tassen en zakjes. -
Niet op voorraad - op bestelling
Een gevoerde etui met koordsluiting. Dikke fleece aan de binnenkant voor bescherming. Kan worden gebruikt om gevoelige apparatuur zoals een nachtkijker in op te bergen. Past in onze Small Oyster pouch.- Gewicht: 38 g
- Afmetingen: 23 x 17 x 2 cm
-
Een evolutie van de klassieke bivakmuts, met een sterk gaas over mond en neusgaten, zodat je vrij kunt ademen - ook tijdens inspannende taken - terwijl je toch bescherming biedt. Lichtgewicht en dun genoeg om onder een helm te dragen, als bescherming tegen wind en kou, maar luchtig genoeg om bij warm weer te dragen. De Annaclava is lang gesneden om de hele nek goed te bedekken. Flatlocknaden voor meer stevigheid en comfort. Gebruik hem als muts door het overtollige materiaal in de muts te stoppen. Materiaal: 59% Modacryl/29% FR Polyester/9% Katoen/3% Elastaan -
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
-
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Weight: 50 g Dimensions: L= 14, W= 11 & D= 2,5 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Niet op voorraad - op bestelling
Weight: 40 g Dimensions: L= 11, W= 9 & D= 2 Fits in: Handcuffs - only classic model with chain ! Fits on: Equipment vest, belt, leg plate or leg attachment Features:A light weight pouch for handcuffs which is are flexible and can be used on the duty belt or covertly. The pouch is designed to be small, lightweight, flexible and to comfortably hold your handcuffs-
Open top for lowest weight
-
The pouch can easily be opened with one hand
-
It sits comfortably mounted on the belt and can be closed with the press button
-
The weight is only 15 grams. The material does not retain water so is no heavier if wet
-
Can be attached without removing items from the duty belt
-
Use the velcro strap on the back to attach the holder to the duty belt. You can open and attach it to the outer belt without removing other pouches
- Open the straps and thread them around the belt and close it with the velcro straps.
-
-
For the group medic or the technician etc. who wants to carry the required equipment on the equipment vest, around the waist, on the back, over the shoulder or attached to the back pack Large compartment with Velcro flap inside the bag Four small and zipped compartments in clear plastic inside the main compartment. Four elasticized compartments with Velcro closure on top of the main compartment One large and two small inside pouches in different colors are attached with Velcro to the bottom of the bag. Zipped closure with emergency closure buckle on the top. Two padded shoulder straps with chest strap to be used when carrying the bag as a backpack. Two long straps to attach it to the back of the equipment vest or to connect and use as a shoulder strap. Roll up ends with Velcro to keep the bands neat. Two short straps to secure it to the equipment vest or to secure it around the leg. Handle in the top to carry the bag in your hand. Outside Velcro stripes so you can attach your markings. Fits: Medical supplies or technical equipment Fits on: The equipment vest back, over your shoulder or around your waist Dimensions: H=33, W=30 & D=10 cm. Volume: 10L Weight: 1200 g -
A tight fitting FR neck gaiter that can be used to protect your neck, as adust cover for your mouth or as a beanie. Light weight and thin to be comfortable in most situations. Material: 63% Lenzing FR/ 29% Conex/ 5% Twaron/ 2% Elastane/ 1% Belltron Muts en uitrusting niet inbegrepen, enkel ter illustratie. -
A band with a good and secure hook to keep your keys at hand any where on your belt or equipment vest * One hand open hook, to make it easy to get the keys * Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt- Measurements: L== 12, W= 2,5 & D= 2
- Weight: 30 g
-
Weight: 50 g Dimensions: L= 13, W= 7 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a bunch of keys and keeps them from rattling-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Niet op voorraad - op bestelling
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment -
Een klein zakje met rits aan de voorkant voor papieren, pennen enz.- MOLLE banden aan de voorkant.
- Met klittenband bedekte buitenkant waar u een patch kunt bevestigen.
- Venster aan de binnenkant voor kaarten of notities.
- Binnenin elastische compartimenten voor pennen of papieren.
- Tuck in bevestigingssysteem maakt het mogelijk om de zak op elke uitrusting vest of riem te bevestigen.
- De nieuwe versie, 21-00309B is 4 cm breder en heeft een kompasvak aan de achterkant.
- Gewicht:110 g
- Afmetingen:16 × 14 × 1 cm
-
Niet op voorraad - op bestelling
Weight: 60 g Dimensions: L= 9, W= 8 & D= 3 cm Fits in: 1x Accuracy International L96A1 AW magazine Fits on: Equipment vest, leg platform and the specialist backpack Features:Safe storage, fast access and light weight-
Stores 1 x 9 round, 7,62magazine for the Accuracy International L96A1 AW rifle
-
Low cut front for fast access
-
Flap for dirt protection
-
2 press buttons to close the flap
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Een grijze en zwarte patch met de tekst SNIPER.
