-
Niet op voorraad - op bestelling
A lightweight medium sized general purpose pouch with a wide opening top zipper. It opens on three sides for an easy access to the contents of the pouch. Two outside MOLLE bands on each side for attaching an additional pouch on the outside. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has velcro open able bands on the back so it can be carried horizontally on the trousers belt or vest in BLACK color only. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits: Gas mask with filter, medical kit and all the other things you need to carry. Dimensions: H=19, W=16 & D=8 cm. -
Niet op voorraad - op bestelling
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Niet op voorraad - op bestelling
Weight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Niet op voorraad - op bestelling
A small backpack or pouch for your ballistic plate.- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Niet op voorraad - op bestelling
For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g -
Niet op voorraad - op bestelling
Een overjack ontworpen voor de operator met de nadruk op camouflage en camouflage. Het gebruik van deze jas zal uw visuele en thermische handtekening aanzienlijk verminderen Zeer goede visuele camouflage Beperkte thermische straling camouflage (NIR) Voorkant gesloten met drukknopen Vlamvertragend Een ghilliejack dat is ontworpen voor de operator om buiten het normale jack te worden gebruikt of bij warm weer buiten een shirt kan buiten het vest van de uitrusting worden gedragen Materiaal Vlamvertragend polyester mesh Past op: Buiten het uitrustingsvest -
Niet op voorraad - op bestelling
Geen voorraadartikel. Het wordt op bestelling gemaakt en heeft normaal gesproken een levertijd van 16 weken. Bestel je er 50 of meer, dan daalt de prijs, maar loopt de levertijd op tot ongeveer zes maanden. Stukken ook afzonderlijk te verkrijgen. -
Niet op voorraad - op bestelling
De SnigleDesign is een must have pet voor de fans die graag op de schietstand hun hoofd bedekken of in de winter zich willen beschermen. Verkrijgbaar in maat Large en Medium. -
Een veilige, gemakkelijke, gladde en ademende bevestigingsplaat voor het been die gemakkelijk te gebruiken, te bevestigen en van het been te verwijderen is. Het past stevig aan je riem. Een stevige en geventileerde plaats op je been voor één tot vier zakjes. Mesh, geperforeerde kunststofplaat en schuim houden het beenpaneel comfortabel en geventileerd. Elastische banden met klittenbandsluiting houden de beenplaat op je been. De snelsluiting met draaifunctie bevestigt de beenplaat aan je riem. De beenplaat is zacht en nauwelijks voelbaar tijdens het dragen. De beenbanden zijn elastisch zodat ze strak en comfortabel zitten. Het is geschikt voor de meeste zakken en houders in ons systeem. Hij neemt geen water op en wordt niet zwaarder als hij nat is. Eén maat voor iedereen. Past: Pistoolholster en alle soorten buidels Past op: Broeksriemen en uitrustingsriemen -
Niet op voorraad - op bestelling
Een veilige, gemakkelijke, soepele en ademende bevestigingsplaat voor het been die gemakkelijk te gebruiken, te monteren en van het been te verwijderen is. Hij past goed aan je riem. Een stevige en geventileerde plek op je been voor één tot vier pouches. Mesh, geperforeerde plastic folie en schuim houden het beenpaneel comfortabel en geventileerd. Elastische banden met klittenbandsluiting bevestigen de beenplaat op uw been. Quick release gesp met draaifunctie bevestigt de beenplaat aan uw riem. De beenbevestigingsplaat is zacht en nauwelijks voelbaar tijdens het dragen. De beenriemen zijn elastisch om strak en comfortabel te zitten. Het is geschikt voor de meeste pouches en houders in ons systeem. Het neemt geen water op en wordt niet zwaarder als het nat is. Eén maat past iedereen. Past bij: Pistoolholster en alle soorten zakjes Past op: Broekriemen en uitrustingsriemen Gewicht: 300g -
Niet op voorraad - op bestelling
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking-
In the folded position the padded front of the pouch protects the GPS from shocks
-
The open mode makes it possible to walk and look at you GPS without removing it from the pouch
-
An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
-
On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
-
There are also Velcro straps for attaching the pouch on a carrier strap
-
Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
-
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
- The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic string closure in the top is fast and easy to open. It is threaded through an eye let further down than normal, this makes it easier to fold the elastic string to the side when you want to remove the magazine fast.
- The pull tab is designed to work with magazines with an angled bottom.
- The universal flap, 25-00007-00-000 can be attached on the magazine pouch. The flap has a silent hook opening that is easy and fast to use. Low cut to make it faster to remove the magazine. Inside Velcro patches were small holders for pistol magazines or grenades can be attached 25 mm MOLLE bands on the outside so you can attach other pouches on the outside. Two or more magazine pouches can be attached outside each other. Eyelet in the bottom to let water out. Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt.
- The attachment systems is easy to use both on standard 25 mm MOLLE systems as well as on the Swedish 20 mm system or on 50 or 60 mm belts.
- The dual holder insert -12, 25-00307-09-000 can be used to hold smaller magazines inside the short speed magazine pouch -12. The insert has 2 elastic holders with adjustable length bottom.
- Stores: 1 x G36 or other 1 x 5,56 or 1 x HK417 magazine or radio, pistol etc.
- Dimensions: W=8 x H=11 x D=3 cm.
