-
Not in stock - on order
An equipment belt system with an inner and an outer belt. The 45 mm wide inner belt is carried in the trousers and the outer 45 mm wide belt is attached on theinner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm -
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
Not in stock - on order
A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.- Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
- Content: 50L.
- Dimensions: B = 34, H = 62, D = 22 cm.
- Weight: 1850 grams.
-
Not in stock - on order
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
A very small lightweight general purpose pouch with a wide opening top zipper.- It opens on 3 sides for an easy access to the contents of the pouch.
- The zipper is semi stiffened to be easier to open and close.
- Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
- Inside loops for securing the contents.
- Bottom drain hole.
- Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
- This system makes it possible to attach the pouch without removing other pouches from the belt.
- Fits inside: Radio, field dressing, small binoculars or other similar sized items.
- Measurements: L= 19, W= 8 & D= 4
- Weight: 100 g
- Volume: 1L
-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
A well designed belt to improve your comfort when you carry a normal loadWeight: 250 g Fits: All pouches and holders Features:-
Plastic reinforced
-
One belt construction
-
3 point security buckle, prevents unwanted opening
The belt fits the following waist measurements:Small: 75-103 cmMedium: 85-113 cmLarge: 95-123 cmXLarge: 105-133 cm -
-
Not in stock - on order
A band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g -
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Not in stock - on order
The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium. -
Not in stock - on order
A small backpack or pouch for your ballistic plate.- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Not in stock - on order
A small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g -
Not in stock - on order
A string with emergency release buckle in the back to carry a identity card or similar. Our wallet can also be carried in it. Dimensions: L=80 cm. -
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g -
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
