-
Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions.
-
Not in stock - on orderAn equipment belt system with an inner and an outer belt. The 45 mm wide inner belt is carried in the trousers and the outer 45 mm wide belt is attached on theinner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm
-
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.
- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
Not in stock - on orderA classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.
- Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
- Content: 50L.
- Dimensions: B = 34, H = 62, D = 22 cm.
- Weight: 1850 grams.
-
Not in stock - on orderA low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.
- Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.
- A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.
- The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.
-
A very small lightweight general purpose pouch with a wide opening top zipper.
- It opens on 3 sides for an easy access to the contents of the pouch.
- The zipper is semi stiffened to be easier to open and close.
- Three outside MOLLE bands for attaching an additional pouch on the outside. No Velcro on the MOLLE bands.
- Inside loops for securing the contents.
- Bottom drain hole.
- Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
- This system makes it possible to attach the pouch without removing other pouches from the belt.
- Fits inside: Radio, field dressing, small binoculars or other similar sized items.
- Measurements: L= 19, W= 8 & D= 4
- Weight: 100 g
- Volume: 1L
-
A well designed belt to improve your comfort when you carry a normal loadWeight: 250 g Fits: All pouches and holders Features:
-
Plastic reinforced
-
One belt construction
-
3 point security buckle, prevents unwanted opening
The belt fits the following waist measurements:Small: 75-103 cmMedium: 85-113 cmLarge: 95-123 cmXLarge: 105-133 cm -
-
Not in stock - on orderA band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g
-
Safe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch
-
Stores 1 x 10 round cal 50 magazine for the Barrett M82A1
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt
-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Not in stock - on orderThe SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium.
-
Not in stock - on orderA small backpack or pouch for your ballistic plate.
- Can hold one ballistic panel & plate and one hydration system.
- Can be attached on the back of the "strap on" plate carrier with I-bars or with the velcro bands through the bands on the back of the yoke on the "Strap on"..
- MOLLE bands on the outside so you can attach other pouches on it.
- Velcro patches on the front for name and unit signs.
- The bottom of the plate carrier can be opened to insert plates, panels and bladders..
- Velcro secured openings in the top for cables or a hydration tube.
-
Not in stock - on orderA small backpack or pouch for your ballistic plate. Can hold one ballistic plate or one 2,5 liter hydration system. Foam ridges on the inside for increased ventilation , comfort and lower trauma. Can be attached on the back of the "strap on" plate carrier or any vest. MOLLE bands on the outside so you can attach other pouches on it. Velcro patches on the front for name and unit signs. The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency. Can be used as a plate carrier with the Carrier pouch or one Double carrier pouch. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11. Dimensions: L=33, W=25 & D=4 cm. Weight: 330 g
-
Not in stock - on orderA string with emergency release buckle in the back to carry a identity card or similar. Our wallet can also be carried in it. Dimensions: L=80 cm.
-
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g
-
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves
-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
A padded belt with 2x25 MOLLE bands and one 10 mm webbing sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A three point security buckle, prevents unwanted opening. The adjuster makes it easy to adjust the size of the equipment belt when you change from heavy winter clothing to lighter clothing. The security band is used as usual on top of the adjuster. This adjuster is very neat when you are changing your clothing during the day. In the morning, it is cold and you wear more clothing. When it gets warmer and you remove some clothing, you need to tighten the belt, and then you use the belt adjuster.
- Weight: 450-800g
- XSmall: 65-95 cm
- Small: 75-105 cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
- XXLarge: 115-145 cm
-
Not in stock - on orderFor 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g
-
Not in stock - on orderSafe storage, fast access, multiple attachment options and easy to silently open and close with one hand; it's all included in this pouch
-
Stores 2 x 30 round 5,56 magazines
-
Low cut front for fast access
-
Large flap for dirt protection
-
The elastic hook opening gives you a silent, safe, one hand, no look opening and closure function that really works in all environments.Low cut front for fast access. Large flap for dirt protection. Inside elastic band to secure one magazine. Eyelet in the bottom to let water out.Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt.
-
-
The Duffel Bag from SnigelDesign is a carrying case and backpack in one. The padded handles also serve as shoulder straps so that the duffel can also be worn on the back. The main compartment has a wide opening and a light coloured inner coating so you can look closely at the inside of the bag. The two zippered side pockets are designed so that you can store a helmet in them. If you don't use it, it can be folded up to save space. The 55L duffel bag is generally accepted as hand luggage. Material 100% polyamide 600D; No.10 YKK® zippers; Duraflex® closures and buckles. Details:
- Padded shoulder straps with fast-circuiting.
- Reinforced handles at the ends.
- Large main compartment with 2-zipper, zippered inner pocket and 2 Velcro surfaces for attaching additional equipment.
- Very large opening and bright inner coating making it easy to see the inside of the bag.
- Two side pockets with 2-way zipper that are large enough for a helmet.
- No.10 YKK® zippers with zipper aids that can be easily grabbed even with gloves.
- Three clear ID slots.
- Velcro surface for ID patches.
- IRR coating to reduce ir signature (stone grey olive green).
- Flame retardant supermaterial according to the specifications of the Swedish Armed Forces (stone grey olive).
- Capacity: 55 litres.
- Dimensions: ong. 28 x 31 x 65 cm.
- Weight: about 795 grams.
-
A light and very comfortable trouser belt. Suitable when you do not carry heavy weights in your pockets. It is elastic and adapts to your body, while still not being flimsy. Made of the same elastic band that we use in the Army's single-point weapon holder for the AK5. The belt is cut to a fitting length in the end that is fastened in the buckle, and the edge is burnt to seal it and prevent fraying. The buckle is easily fitted and removed. A tip is to remove only the buckle and keep the strap in the pants, when passing through security at airports.
- Material: Polypropylene tape
- Weight: 90 g
- Dimensions: The belt is 128 cm long.
- Width of the band 40 mm.
-
A basic harness that will take some pressure of your hips when used with the equipment belt. Adjustable in length in the back and front. Attaches to our police equipment belt with Velcro patches. It will not block the possibility to attach pouches. One size, adjustable to fit all. The belt is not included.
-
Not in stock - on orderA tight-fitting flame retardant hat that can be used under a helmet. Lightweight and thin to be comfortable in most situations, yet warm enough to protect from the cold. Flatlock seams for more firmness. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane
-
Not in stock - on orderWeight: 450 g Dimensions: L= 28, W= 31 & D=11 Fits: 1 gasmask, gloves and accessories Fits on: The leg or on the left back of the vest, ballistic or moduler Features
- A convenient bag for a gas mask.
- Carried on the leg or the left rear of the ballistic or equipment vest.
- Easy to open flap that even can be used if the bag is attached on the back of the vest.
- Inner pocket for gloves and other protective equipment.
- The flap closes with a long Velcro along the edge of the flap. It is secured with a push button at the pull band.
-
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:A simple glove keeper to carry gloves on the belt
-
Fits most gloves
-
3 press button adjustment for different sized gloves
-
Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
-
Light weight
-
-
Not in stock - on orderA tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment
-
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Long and narrow gear like flashlights and other similar items. Dimensions: H = 15 cm, W = 4 cm, D = 3 cm Weight: 50 g.
-
A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment