-
Designed for 1 x 0.338 Lapua 8.6 mm x 70 mm mag for the L115A1 / 3 AW and AWM. This Warrior case also comes with black PosiGrip lining. It can also contain 1 x .300 Win Mag (7.62 mm x 67 mm) Mag bag or 1 x standard 7.62 mm x 51 mm. The .338 single mag takes 3 horizontal rows of MOLLE on compatible carrier rigs and bags. -
- The Warrior Assault Cargo Pack is a small backpack that can be attached to a ballistic vest or worn with the detachable shoulder straps, emergency shoulder straps,
- integrated 3-litre blowing compartment (bladder not included),
- large main compartment with zipper,
- small patched zip pocket with subdivision,
- Compression straps,
- 4 loops of Molleband each on 2 levels to attach additional bags,
- 2 Velcro closures for the drinks hose.
- Dimensions: approx. 18 x 18 x 38.5 cm (LxBxH),
- Weight: about 730 grams.
- Made from water-repellent 1000D Cordura, all tires according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are produced according to military specifications.
-
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
The Warrior Assault System Double 9mm Direct Action Mag Pouch can be used with and without a magazine lock, the plastic material on the inside in combination with the elastic band on the side prevents the warehouses from falling out, the warehouse safety can be opened with Velcro and fleece tape.- Dimensions: approx. 10 x 2.5 x 11 cm (LxBxH),
- Weight about 120 grams.
-
Warriors Elite Ops Single 9 mm Direct Action Mag Pouch is compact and allows the cover to roll down and secure with Velcro to allow quick access to chargers. The bag can contain 1 horizontal row of MOLLE on any compatible carrying belt or bag. -
The Warrior Assault System Triple 9mm Direct Action Mag Pouch can be used with or without the magazine protection, the internal plastic material combined with the elastic band on the side prevents the magazines from falling out. The magazine catcher can be opened with Velcro and Velcro. Suitable for calibers 9mm, .40 and .45 double row pistol magazines. Material- 100% polyamide (500D Cordura® Performance)
- US MIL-Spec webbing (with a tear strength of 1200 pounds)
- US MIL-Spec stitching, treated against mold.
- magazine holders with Velcro closure, can be folded forward when not in use.
- Elastic sides.
- PALS mounting loops for MOLLE system (25 mm).
- Water drainage eyes at the bottom.
- Dimensions: approx. 12.5 x 2.5 x 11 cm.
- Weight: approx. 150 g.
-
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
Double 5.56mm Magazine from Warrior. Suitable for M4 and SA80 magazines. The Double 5.56mm Open occupies 4 horizontal rows of MOLLE on compatible carry straps and bags. -
The Warrior Assault System Standard Grab Bag can be used as an E&E bag and has the following details: Main compartment with zipper and 3 dividers and Velcro opening for the cable channel: 1. Shallow compartment with 3 wide rubber belt loops, 2. Wide middle compartment with pocket for mobile phone or radio and loops for rubber straps for pens or glowsticks, 3. Shallow outer compartment with fully fleece-lined walls, including pistol holster with Velcro and single magazine pocket. The main compartment is well protected by a detachable lid with transparent card compartment (27x36 cm), this is secured with a Fastex closure.- The external Molle section is equipped with 3 modular M4 warehouse bags,
- side pocket for mobile phone with Velcro closure
- on the other side is a modular 9mm double magazine bag,
- on the back there is a pocket for the hose with Velcro where the hip belt can be stored,
- adjustable shoulder strap with Velcro and modular pocket for tools or magazines.
-
Warrior's Large Admin Panel is ideal to keep important paper/personal IDs safe. It has two pockets covered with a Velcro flap, a 9 mm pistol magazine and Velcro at the front for attaching a wide range of patches, eg blood type nationality flags etc. The large control panel takes up 4 rows of MOLLE on any compatible luggage carrier or bag. -
Laser-cut elastic turnstile holder from Warrior Assault Systems for storing a C.A.T. turnstile. The Laser Cut Elasticated Tourniquet Holder is primarily intended for C.A.T. Turnstiles developed, but also fits on an S.O.F.T. Tourniquet, which is tight in the holder. The laser-cut material is made of high-quality composite laminate material. All threads are resistant to powdery mildew, UV light, water, heat and cold. All materials used have the lowest infrared values (99.8%) and are manufactured in the US according to US military specifications. material 500D Cordura®-nylon Details:- One-handed operation.
- Elastic bands on the side for compression and a secure grip.
- Closing flap with Velcro and reinforced finger loop.
- Laser-cut PALS mounting loop for MOLLE system (25 mm).
- IRR coating to reduce IR signature.
- Dimensions: approx. 11.5 x 4.5 x 3.8 cm.
- Weight: approx. 30 g.
-
Not in stock - on order
Our laser-cut IFAK bag is designed to store an operator's personal medical kit, including combat mesh, CAT and/or trauma bandage. They are all safely stored in a removable cover that fits into the outer cover. The cover and medkit are held securely in place by elastic sides and Velcro. A large tab with non-slip Hypalon coating is attached to the inner cover and if you pull it with force, the inner cover comes loose from the otter pouch, allowing you to open it quickly and easily with one hand. The Laser Cut IFAK is designed to be attached horizontally to one of our Warrior straps, by means of 4 MOLLE arms. It can also be mounted vertically using our Warrior 90-degree adapter. Please note, content is not included and for illustrative purposes only. -
The patent-pending Warrior's Medic Rip Off Pouch fits a wide variety of medical equipment. Elastic compartments and tabs organize the kit in order of use. Space for 2 x C.A.Ts 2 x compression bandages 2 x Quick Clot Combat Gauze Bolin Chest Seal Airway Scissors The pouch is held firmly in place by Velcro and supported by webbing. Pull back the Velcro and use the pouch in the traditional shape or pull the pouch to tear the pouch off the panel. Thus, it can be immediately passed on to another user or injured person, and the owner can continue with the mission or go to the target. The Medic Rip Off pouch takes up 4 rows of MOLLE on any compatible chest strap or bag. *Content not included, for illustrative purposes only. -
Warrior's medical scissor bag can contain 1 horizontal row of MOLLE on any compatible carrier bag or belt. *Scissors not included.
